DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 15

Technical content

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC. 050-320 PRODUCT BRIEF 100 MBPS-4.25 GBPS PRINTED CIRCUIT BOARD (PCB) MOUNT DUAL PIN/TIA RECEIVER FOR SINGLE MODE FIBER (SMF) SMALL & COMPACT WITH RUGGED CONSTRUCTION FOR HARSH ENVIRONMENTS REV DESCRIPTION DATE APPROVED

3 Preliminary 06/01/2015 TC

©2015 Glenair, Inc. REV: 3 US Cage Code 06324 Printed in USA GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 www.glenair.com PAGE 2 of 15 E-mail: sales@glenair.com 050-320 Product Brief PCB Mount Dual Receiver for Single Mode Fiber 100 Mbps – 4.25 Gbps, 3.3V PCB Mount Fiber Optic Dual-Receiver, 100M-5Gbps, SMF, 3.3V Glenair 050-320, is a ruggedized harsh environment PCB mount Dual-Receiver with electrical and optical functionality equivalent to SFP Dual-Receivers but with mechanical design that is suited to the harsh temperature and vibration environments found in Military, Aerospace, Railway, Oil and Gas, and Industrial applications. The PCB mount optical Dual-Receivers also support optional Digital Monitoring Interface (DMI) features in accordance with SFF 8472. The receiver includes two (2) Receiver Optical Subassemblies (ROSA) and amplification/quantization circuitry. The ROSAs, containing a PIN photodiode and trans-impedance preamplifier, are located at the optical interface and mate with the GC optical connector. Each ROSA is followed by a limiting amplifier IC that provides post- amplification and quantization. Also included is a Loss Of Signal (LOS) detection circuit. HOW TO ORDER Table 1 Part Number Options Part Number Description 050-320-1-D 100Mbps-2.5Gbps, with DMI 050-320-2-D 2.5Gbps-5Gbps, with DMI KEY FEATURES/BENEFITS  SFP Compatible Electrical I/O signal levels  PIN TIA to support high sensitivity up to 5 Gbps  Industry standard CML outputs that make for simple integration on customer host PCB  Glenair Rugged GC Optical connector  Module is securely mounted with screws to PCB to ensure excellent shock and vibration performance  High-Speed Electrical plug-in connector eliminates the need for soldering & enables ease of servicing  Compact size: ~ 0.8” x 0.9” x 0.5”  -40°C to +85°C Operating Temperature Range  Glenair fiber jumpers available to connect from PCB Mount Module to any Glenair Mil/Aero Fiber Optic Connector Style  Evaluation fixtures available  Optional Digital Diagnostic and Monitoring (DMI) based on SFF-8472, enables monitoring of: o Received optical power for each receiver o Temperature o Supply voltage

APPLICATIONS

  • Harsh Environment such as: Airborne, Tactical, Railway, Industrial, Oil and Gas and Shipboard

o Ethernet, Fibrechannel, 1x, 2x, 4x, SFPDP

©2015 Glenair, Inc. REV: 3 US Cage Code 06324 Printed in USA GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 www.glenair.com PAGE 3 of 15 E-mail: sales@glenair.com 050-320 Product Brief PCB Mount Dual Receiver for Single Mode Fiber 100 Mbps – 4.25 Gbps, 3.3V Ratings and Specifications TABLE 2 ABSOLUTE MAXIMUM RATINGS Parameter Symbol Min Typ Max Units Notes Storage Temperature Ts -55 +100 °C Supply Voltage Vcc -0.4 3.8 V VccR may not differ by more than 0.5V TABLE 3 OPERATING CONDITIONS Parameter Symbol Min Typ Max Units Notes Operating Temperature Top -40 +85 °C Supply Voltage Vcc 3.135 3.3 3.465 V Supply Current Icc 220 240 mA Typical @ +85°C Power Supply Noise (Peak-Peak) Vcc_ripple 100 mV TABLE 4 ELECTRO-OPTICAL CHARACTERISTICS – RECEIVER Parameter Symbol Min Typ Max Units Notes 050-320-1 Sensitivity, BER 10-12, PRBS 2-7-1, Er 10 dB PIN -22 -20 dBm PIN PD @ 1.25 Gbps Sensitivity, BER 10-12, PRBS 2-7-1, Er 10 dB PIN -22 dBm PIN PD @ 2.5 Gbps 050-320-2 Sensitivity, BER 10-12, PRBS 2-7-1, Er 10 dB PIN -20 dBm PIN PD @ 3.2 Gbps Sensitivity, BER 10-12, PRBS 2-7-1, Er 10 dB PIN -18 -16 dBm PIN PD @ 4.25Gbps Overload, BER 10-12, PRBS 2-7-1 PIN -1 dBm @1.25Gbps or @ 4.25 Gbps Optical Wavelength λIN 1270 1600 nm Receiver Differential Output Impedance Zout 100 Ohms AC coupled internally Differential Output Voltage Swing Vout_d 600 1200 mV CML, 100 ohm LOS Assert Level LOS -25 -23 dBm @ 1.25Gbps LOS Hysteresis LOSHYS 1.25 2.2 dB @ 1.25Gbps

©2015 Glenair, Inc. REV: 3 US Cage Code 06324 Printed in USA GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 www.glenair.com PAGE 4 of 15 E-mail: sales@glenair.com 050-320 Product Brief PCB Mount Dual Receiver for Single Mode Fiber 100 Mbps – 4.25 Gbps, 3.3V Ratings and Specifications (continued) TABLE 5 COMPLIANCE SPECIFICATIONS CHARACTERISTIC Standard Condition Notes Mechanical Shock MIL-STD-810 Para. 516.6, proc. I, 650g 0.9 ms operating Mechanical Vibration MIL-STD-810 Para. 514.6, 40g rms Random, operating ESD MIL-STD-883 1000V HBM Flame Resistance MIL-STD-1344 Method 1012, Cond. B 30 seconds Damp Heat MIL-STD-1344 Method 1002.2, Cond. B 10 cycles , 24 hours Eye Safety CDRH and IEC-825 Class 1 Laser Product

©2015 Glenair, Inc. REV: 3 US Cage Code 06324 Printed in USA GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 www.glenair.com PAGE 5 of 15 E-mail: sales@glenair.com 050-320 Product Brief PCB Mount Dual Receiver for Single Mode Fiber 100 Mbps – 4.25 Gbps, 3.3V FIGURE 1 - OUTLINE DRAWING CONTINUED (MARKING) LABELING: Each unit will be shipped in an antistatic bag. The label on the antistatic bag shall be at a minimum Arial size 10 black font and contain at a minimum the following information: ANTISTATIC BAG LABEL: Glenair Cage Code (06324) Part Number (PN 050-xxx as required) Date Code (DC xxxx) Serial Number (SN 123456) Each unit will be marked on the transceiver as follows. Either laser engraving or labeling may be used.

  • Marking font to be Arial, greater than .08 inches in height.
  • Marking: FIRST LINE OF TEXT
  • Glenair
  • Serial Number (6 digits) SECOND LINE OF TEXT:
  • Part number Example GLENAIR SN123456 050-320-2-D

©2015 Glenair, Inc. REV: 3 US Cage Code 06324 Printed in USA GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 www.glenair.com PAGE 6 of 15 E-mail: sales@glenair.com 050-320 Product Brief PCB Mount Dual Receiver for Single Mode Fiber 100 Mbps – 4.25 Gbps, 3.3V FUNCTIONAL DESCRIPTION RECEIVER SECTION Receiver Loss of Signal (LOS) The Loss Of Signal (LOS) output indicates an unusable optical input power level. The post-amplification IC includes transition detection circuitry which monitors the ac level of incoming optical signals and provides a TTL/CMOS compatible status signal to the host. A low LOS logic level indicates the presence of an optical input while a high LOS logic level indicates an unusable optical input. The LOS thresholds are factory-set so that a high output indicates a definite optical fault has occurred (e.g. failed transmitter, broken or disconnected fiber connection to the PCB Mount Module, etc.). The LOS can also be monitored via the 2-wire serial interface (address A2h and A4h, byte 110, bit 1). Figure 2 PCB mount Dual-Receiver Block Diagram

©2015 Glenair, Inc. REV: 3 US Cage Code 06324 Printed in USA GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 www.glenair.com PAGE 8 of 15 E-mail: sales@glenair.com 050-320 Product Brief PCB Mount Dual Receiver for Single Mode Fiber 100 Mbps – 4.25 Gbps, 3.3V The PCB mount Dual-Receiver interfaces with the host circuit board through twenty I/O pins identified by function in T able 6. The Dual-Receiver high speed receive interface requires SFP MSA compliant signal lines on the host board. The Rx_LOS lines require TTL lines on the host board (per SFF-8074i) if used. If an application chooses not to take advantage RX_LOS do not need to be connected. Digital Diagnostic Interface and Serial Identification (EEPROM) The PCB mount Dual-Receiver is derived from the SFF-8074i SFP specification and with SFF-8472, the SFP specification for Digital Diagnostic Monitoring Interface, but modified to account for Dual-Receiver functionality. Both specifications can be found at http://www.sffcommittee.org. FIGURE 4 – DIGITAL DIAGNOSTIC MEMORY MAP OVERVIEW The PCB mount Dual-Receiver features EEPROM for Serial ID, which contains the product data stored for retrieval by host equipment. This data is accessed via the 2-wire serial EEPROM protocol of the ATMEL AT24C01A or similar, derived from with the industry standard SFP Multi-Source Agreement but modified to account for Dual-Receiver functionality. The base EEPROM memory, bytes 0-255 at memory address A0h, is organized in compliance with SFF- 8074i. As an enhancement to the conventional SFP interface defined in SFF-8074i, the PCB mount Dual-Receiver is derived from SFF-8472 (digital diagnostic interface for optical transceivers) with memory organized as shown in Figure 4. This new digital diagnostic information is stored in bytes 0-255 at memory address A2h (RX1) and A4h (RX2). Using the 2- wire serial interface defined in the MSA, the PCB mount Dual-Receiver provides real time temperature, supply voltage, and received input power. These parameters are internally calibrated, per the SFF -8472 MSA. The digital diagnostic interface also adds the capability to monitor for Receiver Loss of Signal (RX_LOS). The diagnostic information provides the opportunity for Predictive Failure Identification, Compliance Prediction, Fault Isolation and Component Monitoring. Compliance Prediction

©2015 Glenair, Inc. REV: 3 US Cage Code 06324 Printed in USA GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 www.glenair.com PAGE 9 of 15 E-mail: sales@glenair.com 050-320 Product Brief PCB Mount Dual Receiver for Single Mode Fiber 100 Mbps – 4.25 Gbps, 3.3V Compliance prediction is the ability to determine if an optical Dual-Receiver is operating within its operating and environmental requirements. The PCB mount Dual-Receiver provides real-time access to its internal supply voltage and temperature, allowing a host to identify potential component compliance issues. Received optical power is also available to assess compliance of fiber cable plant and remote transmitter. When operating out of requirements, the link cannot guarantee error free transmission. Fault Isolation The fault isolation feature allows a host to quickly pinpoint the location of a link failure, minimizing downtime. For optical links, the ability to identify a fault at a local device, remote device or cable plant is crucial to speeding service of an installation. PCB mount Dual-Receiver real-time monitors of Vcc, Temperature and Rx_Power can be used to assess local Dual-Receiver current operating conditions. In addition, status flag Rx Loss of Signal (LOS) is mirrored in memory and available via the two-wire serial interface. Component Monitoring Component evaluation is another use of the PCB mount Dual-Receiver real-time monitors of Vcc, Temperature and Rx_Power. Potential uses are as debugging aids for system installation and design, and Dual -Receiver parametric evaluation for factory or field qualification. For example, temperature per module can be observed in high density applications to facilitate thermal evaluation of systems that incorporate this PCB mount Dual-Receiver

©2015 Glenair, Inc. REV: 3 US Cage Code 06324 Printed in USA GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 www.glenair.com PAGE 10 of 15 E-mail: sales@glenair.com 050-320 Product Brief PCB Mount Dual Receiver for Single Mode Fiber 100 Mbps – 4.25 Gbps, 3.3V Required Host Board Components A power supply noise rejection filter as describe in SFP MSA is required on the host PCB to meet data sheet performance. This is filter incorporates an inductor which should be rated to 400 mADC and 1 Ω series resistance or better. It should not be replaced with a ferrite. The required filter is illustrated in Figure 5. Also, the host PCB for the PCB mount Dual-Receiver requires 4.7 K to 10 KΩ pull-up resistors for TX_FAULT, LOS, SCA and SDL lines. FIGURE 5 RECOMMENDED HOST BOARD POWER SUPPLY FILTERING CIRCUIT Fiber Compatibility The Dual-Receiver is capable of transmission at 2 to 10km with 9/125 μm fiber.

©2015 Glenair, Inc. REV: 3 US Cage Code 06324 Printed in USA GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 www.glenair.com PAGE 11 of 15 E-mail: sales@glenair.com 050-320 Product Brief PCB Mount Dual Receiver for Single Mode Fiber 100 Mbps – 4.25 Gbps, 3.3V Electrostatic Discharge (ESD) The Dual-Receiver is compatible with ESD levels found in typical manufacturing and operating environments as described JEDEC EIA JESD22-A114, Class 1C (<2000Volts) HBM. Glenair recommends that devices are handled with ESD precautions to limit exposure to below 500V HBM. There are two design cases in which immunity to ESD damage is important. The first case is during handling of the Dual - Receiver prior to insertion to the host board. To protect the Dual-Receiver, it’s important to use standard industry ESD handling precautions. These precautions include using grounded wrist straps, work benches, and floor mats in ESD controlled areas. The ESD sensitivity of the Glenair PCB mount Dual-Receiver is compatible with typical industry production environments. The second case to consider is static discharges to the exterior of the host equipment after installation, in which case the Dual-Receiver may be subject to system-level ESD requirements. Application Support To assist in the Dual-Receiver design and evaluation process, Glenair offers the following aids:

  • Evaluation board & Product Manual, part number 050-330, which facilitates in the testing of the PCB mount Dual- Receiver.
  • 3D Step file to support modeling of mechanical fit and routing
  • PADS schematic and PCB layout library files that can be exported into customer’s PCB software design program
  • Applications Aid Example of PCB layout including details of high speed transmission designs Customer Manufacturing Processes This module is mounted with screws and interfaces with a high-speed low cost surface mount electrical connector residing on the host PC board. The PCB mount Dual-Receiver is not designed for aqueous wash, IR reflow, or wave soldering processes and should be mounted on the host board after host PC board has been through its assembly process.

©2015 Glenair, Inc. REV: 3 US Cage Code 06324 Printed in USA GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 www.glenair.com PAGE 12 of 15 E-mail: sales@glenair.com 050-320 Product Brief PCB Mount Dual Receiver for Single Mode Fiber 100 Mbps – 4.25 Gbps, 3.3V Byte Decimal Hex Data Notes Byte Decimal Hex Data Notes 0 80 Glenair PCB mount Dual-Receiver 37 00 Vendor OUI (NOT USED) 1 04 Serial ID Module Definition 38 00 Vendor OUI (NOT USED) 2 80 “GC” Fiber Optic Connector 39 00 Vendor OUI (NOT USED) 3 00 40 30 “0” Vendor Part Number ASCII character 4 00 41 35 “5” Vendor Part Number ASCII character 5 00 42 30 “0” Vendor Part Number ASCII character 6 02 1000BASE-LX 43 2D “-“ Vendor Part Number ASCII character 7 00 44 33 “3” Vendor Part Number ASCII character 8 00 45 32 “2” Vendor Part Number ASCII character 9 00 46 30 “0” Vendor Part Number ASCII character 10 00 47 2D “-“ Vendor Part Number ASCII character 11 01 Compatible with 8B/10B encoded data 48 32 “2” Vendor Part Number ASCII character 12 32 BR, 5Gbps 49 20 Note 5 13 00 50 20 “ “ Vendor Part Number ASCII Character 14 00 51 20 “ “ Vendor Part Number ASCII Character 15 64 9/125 µm Fiber, 10km @ 1.25Gbps 52 20 “ “ Vendor Part Number ASCII Character 16 00 53 20 “ “ Vendor Part Number ASCII Character 17 00 54 20 “ “ Vendor Part Number ASCII Character 18 00 55 20 “ “ Vendor Part Number ASCII Character 19 00 56 20 “ “ Vendor REV Level ASCII Character 20 47 “G” Vendor NAME ASCII Character 57 20 “ “ Vendor REV Level ASCII Character 21 4C “L” Vendor NAME ASCII Character 58 20 “ “ Vendor REV Level ASCII Character 22 45 “E” Vendor NAME ASCII Character 59 20 “ “ Vendor REV Level ASCII Character 23 4E “N” Vendor NAME ASCII Character 60 05 Hex Byte of Laser Wavelength (Note 6) 24 41 “A” Vendor NAME ASCII Character 61 1E Hex Byte of Laser Wavelength (Note 6) 25 49 “I” Vendor NAME ASCII Character 62 RESERVED 26 52 “R” Vendor NAME ASCII Character 63 Check sum code for ID fields 0-62 (Note 7) 27 20 “ “ Vendor NAME ASCII Character 64 00 28 20 “ “ Vendor NAME ASCII Character 65 1A RX_ LOS 29 20 “ “ Vendor NAME ASCII Character 66 00 30 20 “ “ Vendor NAME ASCII Character 67 00 31 20 “ “ Vendor NAME ASCII Character 68-83 Serial Number, ASCII (Note 8) 32 20 “ “ Vendor NAME ASCII Character 84-91 Date Code (Note 9) 33 20 “ “ Vendor NAME ASCII Character 92 68 Diagnostic Monitoring Type 34 20 “ “ Vendor NAME ASCII Character 93 B0 Enhanced Options 35 20 “ “ Vendor NAME ASCII Character 94 05 SFF-8472 rev 11.0 36 00 95 Checksum for bytes 64-94 (Note 7) 96-255 00 Notes: 1. FC-PI speed 100 MBytes/sec is a serial bit rate of 1.0625 GBit/sec. 2. RESERVED 3. RESERVED 4. RESERVED. 5. Table 1, Part number options/extensions 6. Laser wavelength is represented in 16 unsigned bits. The hex representation of 1310nm is 051E 7. Addresses 63 and 95 are checksums calculated per SFF-8472 and SFF-8074, and stored prior to product shipment. 8. Addresses 68-83 specify the module’s ASCII serial number and will vary by unit. 9. Addresses 84-91 specify the module’s ASCII date code and will vary according to manufactured date-code. TABLE 7 TWO-WIRE INTERFACE ID: DATA FIELDS – ADDRESS A0h

©2015 Glenair, Inc. REV: 3 US Cage Code 06324 Printed in USA GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 www.glenair.com PAGE 13 of 15 E-mail: sales@glenair.com 050-320 Product Brief PCB Mount Dual Receiver for Single Mode Fiber 100 Mbps – 4.25 Gbps, 3.3V Table 8 Two-Wire interface ID: Data Fields – Address A2h (RX1), A4h (RX2) NOTE: TX Data fields are not applicable (i.e. address 16-31 and 100-103 are not applicable) Byte # Decimal Data Notes Byte # Decimal Data Notes Byte # Decimal Data Notes

0 Temp H Alarm MSB (Note 1) 26 Reserved 104 Rx Pavg MSB (Note 5 )

1 Temp H Alarm LSB (Note 1) 27 Reserved 105 Rx Pavg LSB (Note 5)

2 Temp L Alarm MSB (Note 1) 28 Reserved 106 Reserved

3 Temp L Alarm LSB (Note 1) 29 Reserved 107 Reserved

4 Temp H Warning MSB (Note 1) 30 Reserved 108 Reserved

5 Temp H Warning LSB (Note 1) 31 Reserved 109 Reserved

6 Temp L Warning MSB (Note 1) 32 RX Pwr H Alarm MSB (Note 5) 110 Status/Control

7 Temp L Warning LSB (Note 1) 33 RX Pwr H Alarm LSB (Note 5) 111 Reserved

8 Vcc H Alarm MSB (Note 2) 34 RX Pwr L Alarm MSB (Note 5) 112 Flag Bits

9 Vcc H Alarm LSB (Note 2) 35 RX Pwr L Alarm LSB (Note 5) 113 Flag Bits

10 Vcc L Alarm MSB (Note 2) 36 RX Pwr H Warning MSB (Note 5) 114 Reserved

11 Vcc L Alarm LSB (Note 2) 37 RX Pwr H Warning LSB (Note 5) 115 Reserved

12 Vcc H Warning MSB (Note 2) 38 RX Pwr L Warning MSB (Note 5) 116 Flag Bits

13 Vcc H Warning LSB (Note 2) 39 RX Pwr L Warning LSB (Note 5) 117 Flag Bits

14 Vcc L Warning MSB (Note 2) 40-45 Reserved 118 Reserved

15 Vcc L Warning LSB (Note 2) 56-94 External Cal Constants (Note 4) 119 Reserved

16 Reserved) 95 Checksum for bytes 0-94 120-122 Reserved

17 Reserved 96 Temperature MSB (Note 1) 123 Reserved

18 Reserved 97 Temperature LSB (Note 1) 124 Reserved

19 Reserved 98 Vcc MSB (Note 2) 125 Reserved

20 Reserved 99 Vcc LSB (Note 2) 126 Reserved

21 Reserved 100 Reserved 127 Reserved (Note 8)

22 Reserved 101 Reserved 128-247 Customer Writable (Note 9)

23 Reserved 102 Reserved 248-255 Vendor Specific

24 Reserved 103 Reserved

25 Reserved

Notes: 1. Temperature (Temp) is decoded as a 16 bit signed twos compliment integer in increments of 1/256 °C. 2. Supply voltage (VCC) is decoded as a 16 bit unsigned integer in increments of 100 μV. 3. Laser bias current (Tx Bias) is decoded as a 16 bit unsigned integer in increments of 2 μA. 4. Transmitted average optical power (Tx Pwr) is decoded as a 16 bit unsigned integer in increments of 0.1 μW. 5. Received average optical power (Rx Pwr) is decoded as a 16 bit unsigned integer in increments of 0.1 μW. 6. Bytes 55-94 are not intended from use but have been set to default values per SFF-8472. 7. Bytes 95 is a checksum calculated (per SFF-8472) and stored prior to product shipment. 8. Byte 127 accepts a write but performs no action (reserved legacy byte). 9. Bytes 128-247 are write enabled (customer writable).

©2015 Glenair, Inc. REV: 3 US Cage Code 06324 Printed in USA GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 www.glenair.com PAGE 14 of 15 E-mail: sales@glenair.com 050-320 Product Brief PCB Mount Dual Receiver for Single Mode Fiber 100 Mbps – 4.25 Gbps, 3.3V TABLE 9 DUAL-RECEIVER DIGITAL DIAGNOSTIC MONITOR CHARACTERISTICS (WHEN APPLICABLE) NOTE: TRANSMITTER PARAMETERS NOT APPLICABLE PARAMETER SYMBOL MIN. UNITS NOTES Dual-Receiver Internal Temperature Accuracy TINT ±3.0 Temperature is measured internal to the Dual-Receiver and is valid from -40°C to +85 °C case temperature Dual-Receiver internal Supply Voltage accuracy VINT ±0.1 V Supply voltage is measured internal to the Dual-Receiver and can, with less accuracy, be correlated to the voltage at the Vcc pin. Valid over 3.3V ±5% Received Average Optical Input Power Accuracy PR ±3.0 dB Coupled from 50/125 mm MM fiber Valid from -24 dBm to - 1 dBm

©2015 Glenair, Inc. REV: 3 US Cage Code 06324 Printed in USA GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 www.glenair.com PAGE 15 of 15 E-mail: sales@glenair.com 050-320 Product Brief PCB Mount Dual Receiver for Single Mode Fiber 100 Mbps – 4.25 Gbps, 3.3V ACCESSORIES Fiber Optic Jumper Cables to support connection to Mil/Aerospace Connectors KEY FEATURES:

  • Jumper cable between Glenair PCB Mount Module (end A) and Mil/Aero Connector termini (End B)
  • Offered with either Multimode and Single Mode fibers PCB Threaded Inserts, PN 059-0007 KEY FEATURES
  • Simplifies installation of PCB mount PCB Mount Modules eliminating the need for washers and nuts
  • Soldered to PCB to eliminate need for handling nuts during assembly
  • Existing Options to support PCB thickness from 0.03” to 0.92”
  • Can support thicker PCB if required EVALUATION Boards, PN 050-330 Include
  • MANUAL with test block diagram, schematic and Evaluation board PCBA
  • Multiple types of PCB mount modules supported by this evaluation board
  • 2 fiber optic cables (P/N: FA02318, 1m, 50 μm/125 μm, GC connector to LC connector) FIGURE 6 Fiber Optic Jumper Cable Assembly (see separate Glenair sales drawing FA02454 for details)