DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

www.glenair.com E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 Opto-Electronic Solutions Rev. Jan. 2013 Size 8 cavity opto-electronic contact 050-301 Size 8 Cavity Opto-Electronic Contact 1.25mm ARINC 801 Terminus, 100Mbps – 4.25Gbps Patent Pending rX How To Order Active Product Code Opto-Electronic Converter Optical Device Type T = Optical Transmitter R = Optical Receiver Signal Type -01 = 1.25 Gbps -03 = 3.20 Gbps -02 = 2.50 Gbps -04 = 4.25 Gbps 050 - 301 - 01 - R Material/Finish Shell 300CrES/Passivate or nm6 Seal Silicone elastomer Fiber ferrule & sleeve Zirconia ceramic PC tail contacts Copper alloy/gold plated PCB flex Fr4 & Polyimide Solder type roHS compliant Sn95/Sb5 (232°C melting temp) & roHS compliant Sn96.5/Ag3.0/Cu0.5 (217° melting) TX (with blue stripe) Size 8 Cavity Opto-electronic contacts transmit and receive differential CmL electrical signals over multimode fiber optic cable. Transmitters consist of a laser driver with a temperature compensation circuit to maintain optical power over the entire operating temperature range, and a 850nm VCSEL laser. receivers consist of an 850nm PIn Photo Detector, a Transimpedance Amplifier with automatic gain control circuit, and a Limiting Amplifier. Differential output data signals are CmL compatible. The transmitter has a Tx Disable pin to turn off transmitter output and a Tx Fault pin to signal a fault condition. receiver includes a CmOS compatible Loss of Signal Indicator to prevent invalid data. Key Features „„ Front-release, front-insert, front-removable Size #8 OE converter designed for ARINC 600 „„ ARINC 664, 801, 803, 804, and 818 standard Compliant „„ Data rates from 100Mbps to 4.25 Gbps „„ Supports Fast and Gigabit Ethernet, AFDX, 1x/2x Fibre Channel, DVI, HDMI, SFPDP , Serial Rapid I/O (sRIO). „„ 100 ohms differential CML inputs with Tx Fault and Tx Disable „„ Link distances up to 550 meters with multimode 50/125µm or 62.5/125 µm fiber „„ Single 3.3v power supply „„ ARINC 801 1.25mm ceramic fiber ferrule

www.glenair.com E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 Opto-Electronic Solutions Rev. Feb. 2013 050-301 Size 8 Cavity Opto-Electronic Contact 1.25mm ARINC 801 Terminus, 100Mbps – 4.25Gbps Notes

  • Contact fits inside radiall & Souriau ArInC 600 Q11 insert layout - Size 8 Quadrax front release/front removable cavity.
  • When installed in ArInC 600 receptacle Q11 insert, this contact couples with ArInC 801 fiber optic contact encased in ArInC 600 female Quadrax adapter.
  • This contact, when installed in radiall or Souriau ArInC 600 receptacle with roHS compliant stand-off will meet applicable optical, mechanical and environmental performance requirements of ArInC 801 contact and ArInC 600 connector.
  • Cap may be removed to provide access for fiber tip cleaning, or to replace alignment sleeve.
  • Laser safety information: Class 1 21CFr1040.10
  • Contact is roHS compliant.
  • recommended PCB installation soldering contacts can withstand locally applied soldering heating of pins typical roHS compliant solder temperature of 260°C and typical time of 10 seconds. Component replacement Part numbers Dry action cleaning tool RECOMMENDED GCLT - C125

www.glenair.com E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 Opto-Electronic Solutions Rev. Jan. 2013 050-301 Size 8 Cavity Opto-Electronic Contact 1.25mm ARINC 801 Terminus, 100Mbps – 4.25Gbps Electrical Pin Arrangement: Transmitter Pin Symbol Description Logic 1 TX Disable Transmit Disable (Input) Logic “1” Input Disable Transmitter Output CmOS Internal 4.7KOhm pulldown

2 Vcc Power Supply

3 GnD Signal Ground

4 TX Fault

Transmitter Fault Indicator (Output) Logic “1” Output Transmitter Fault Condition CmOS Open Drain

5 TX- Transmitter Inverted Data (Input) CmL (Current

6 TX+ Transmitter non-Inverted Data

(Input) CmL (Current mode Logic note: 50 µm fiber output Absolute Max. Rating: Transmitter Parameter symbol Min. typ. Max. unit Storage Temperature Ts -55 +100 °C Supply Voltage Vcc -0.4 +4 V Tx Disable Input Voltage V Disable -0.4 Vcc V Operating Conditions: Transmitter Parameter symbol Min. typ. Max. unit Operating Temperature Top -40 +85 °C Supply Voltages Vcc 3.14 3.3 3.46 V Differential Input Voltage Vid 250 2200 mVp-p Power Supply noise VCCripple 0.15 Vp-p Optical Transmitter Parameter symbol Min. typ. Max. unit Optical Output Power Pout -6.5 -1.5 dBm Optical Wavelength λ Out 830 850 860 nm Spectral Width Dl rms 0.85 nm Extinction ratio -01 (1.25 bps) -02 (2.50 bps) -03 (3.20 bps) -04 (4.25 bps) Er 6.0 10 dB Total Jitter TJ 60 ps Transmitter Power Supply Current VCC = 3.14 to 3.46V Parameter symbol Min. typ. Max unit Supply Current ICC 50 90 mA Transmitter: Example Optical Link Distances Protocol Fiber type Distance Gigabit Ethernet 62.5/125µm, 200mHZ*Km 50/125µm, 500mHZ*Km 275 meters 550 meters Recommended Interface Circuit tRansmitteR Optical Output LD monitor PD GnD tx Fault tx Disable tx- tx+ 6 Vcc Ferrite Bead 150 Ohms minimum @100mhz 0.01μF 0.1μF 10μF 0.01μF 50Ω Transmission Line 50Ω Transmission Line Vcc=3.3v Vcc=3.3v 4.7kΩ 0.01μF 100 Transmitter

www.glenair.com E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 Opto-Electronic Solutions Rev. Jan. 2013 050-301 Size 8 Cavity Opto-Electronic Contact 1.25mm ARINC 801 Terminus, 100Mbps – 4.25Gbps Absolute Max. Rating: Receiver Parameter symbol Min. typ. Max. unit Storage Temperature Ts -55 +100 °C Operating Voltage Vcc -0.4 +4 V Operating Conditions: Receiver Parameter symbol Min. typ. Max. unit Operating Temperature Top -40 +85 °C Supply Voltages Vcc 3.14 3.3 3.46 V Power Supply noise VCCripple 0.15 V Optical Receiver Parameter symbol Min. typ. Max. unit Optical Sensitivity 125 mbps–1.25 Gbps Er=9dB, PrBS 2^7-1 BEr=10^-12 -01 = 125 mbps -01 = 1.25 Gbps -02 = 2.50 Gbps -03 = 3.20 Gbps -04 = 4.25 Gbps -17 -17 -17 -15 -15 -14 dBm dBm dBm dBm dBm dBm Optical Overload 0 dBm Optical Wavelength λ Out 830 860 nm Differential Output Swing (P-P) Vdiff 600 1200 mV LOS Assert Level LOSh -24 -22 dBm LOS Hysteresis LOS HYS 1.5 2.3 dB Receiver Power Supply Current VCC = 3.14 to 3.46V, Over Top Parameter symbol Min. typ. Max. unit Supply Current ICC 90 mA Electrical Pin Arrangement - Receiver Pin Symbol Description Logic

1 GnD Signal Ground

4 LOS

Loss of Signal (Output) Loss of Valid Optical Signal  Logic “1” Output CmOS Open Drain 5 rX- receiver Inverted Data (Output) CmL (Current mode Logic 6 rX+ receiver non-Inverter Data (Output) CmL (Current mode Logic note: 62.5 µm fiber input Recommended Interface Circuit ReCeiVeR Optical input PD GnD GnD 1 LOs 4 Rx- Rx+ 6 Vcc Ferrite Bead 150 Ohms minimum @100mhz 0.01μF 0.1μF 10μF 0.01μF 50Ω Transmission Line 50Ω Transmission Line Vcc=3.3v Vcc=3.3v 4.7kΩ 0.01μF Receiver