03K128-K20N3 ROSENBERGER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
RPC-3.50 Jack – QMA Jack 03K128-K20N3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG All dimensions are in mm; tolerances according to ISO 2768 m-H Interface RPC-3.50 according to IEC 60169-23 RPC-3.50 mechanically compatible with RPC-2.92 and SMA QMA according to QLF® (Quick Lock Formula) Rosenberger is an authorised QLF manufacturer Documents Material and plating Connector parts Material Plating Center conductor CuBe Gold, min. 1.27 µm, over nick el Outer conductor RPC-3.50 Brass White bronze(e.g. Op talloy®) Outer conductor QMA CuBe or equiv. White bronze(e.g . Optalloy®) Dielectric PS
RPC-3.50 Jack – QMA Jack 03K128-K20N3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG Electrical data Frequency DC to 18 GHz Return loss ≥ 32 dB, DC to 4 GHz ≥ 24 dB, 4 GHz to 18 GHz Mechanical data RPC-3.50 QMA Mating cycles ≥ 500 ≥ 100 Maximum torque 1.70 Nm Recommended torque 0.90 Nm Engagement force 25 N Disengagement force 20 N Gauge 0.00 mm to 0.08 mm 0.00 mm to 0.08 mm General standard definition For proper operation the vector network analyzer (VNA) needs a model describing the electrical behaviour of this calibration standard. The different models, units, and terms used will depend on the VNA type and they will have to be entered into the VNA. All values are based on typical geometry and plating. Offset Z o / Impedance / Z o 50 Ω Offset Delay 73.4079 ps Length (electrical) / Offset Length 22.00 mm Offset Loss 2.51 G Ω/s Loss 0.0159 dB/ GHz Environmental data Operating temperature range 1 + 20 °C to +26 °C Rated temperature range of use 2 0 °C to +50 °C Storage temperature range - 40 °C to +85 °C RoHS compliant 1 Temperature range over which these specification are valid. 2 This range is underneath and above the operating temperature range, within the calibration adaptor is fully functional and could be used without damage.
RPC-3.50 Jack – QMA Jack 03K128-K20N3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG Declaration of calibration options Factory Calibration Standard delivery for this calibration standard includes a Factory Calibration. The Calibration Certificate issued reports individual calibration results, traceable to Rosenberger standards , national / international standards are not available. Model based standard definitions are reported in an Agilent/Keysight, Rohde & Schwarz and Anritsu compatible VNA format. Accredited Calibration Not available. For further, more detailed information see application note AN001 on the Rosenberger homepage. Calibration interval Recommendation 12 months Packing Standard 1 pce in box Weight 5.0 g/pce Draft Date Approved Date Rev. Engineering change n umber Name Date While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary.