0313005.HXP

0313.010HXP LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

Electrical Characteristics by Series t *OBDDPSEBODFXJUI6- Standard 248-14 t "WBJMBCMFJODBSUSJEHF and axial lead format and with various forming dimensions t 3P)4DPNQMJBOUBOE Lead-free

Applications

Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. % of Ampere Rating Ampere Rating Opening Time 100% 10mA – 30A 4 hours, Minimum 135% 10mA – 30A 1 hour, Maximum 200% 10mA – 15A 5 sec., Min., 30 sec., Max 20A – 30A 5 sec., Min., 60 sec Max PS E

Description

Revised: April 26, 2011

Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology 318 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 313/315 Series 3AG > Time Lag > 313/315 Series Please refer to www.littelfuse.com/series/313.html or /315.html for current information. Electrical Characteristic Specifications by Item Amp Code Ampere Rating (A) Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Agency Approvals PS E .010 0.01 250 35A@250Vac 10KA@125Vac 4300.0000 0.000121 xx x .031 0.031 250 430. 0000 0.0 0303 x x x .040 0.04 250 300. 0000 0.0 0630 x x x .062 0.062 250 120. 0000 0.0210 x x x .100 0.1 250 43.0000 0.0850 x x x .125 0.125 250 30.0000 0.152 x x x .150 0.15 250 20.0000 0.270 x x x .175 0.175 250 8.6700 0.177 x x x .187 0.187 250 8.0100 0.230 x x x .200 0.2 250 6.5900 0.270 x x x .250 0.25 250 4.2700 0.385 x x x .300 0.3 250 3.1350 0.730 x x x .375 0.375 250 2.0950 1 .23 x x x .400 0.4 250 1 .8750 1 .35 x x x .500* 0.5 250 1 .2600 2.55 x x x .600 0.6 250 0.9120 4.00 x x x .700 0.7 250 0.7000 5.90 x x x .750 0.75 250 0.6215 7 .16 x x x .800 0.8 250 0.5540 8.00 x x x 001 .* 1 250 0.3750 14.0 x x x x 01 .2 1 .2 250 100A@250Vac 10KA@125Vac 0.2780 21 .5 x x x x 1 .25 1 .25 250 0.2600 24.0 x x x x 01 .5* 1 .5 250 0.1910 38.0 x x x x 01 .6 1 .6 250 0.1710 49.6 x x x x 01 .8 1 .8 250 0.1410 58.0 x x x x 002.* 2 250 0.1169 77 .0 x x x x 2.25 2.25 250 0.0968 121 x x x x x 02.5 2.5 250 0.0811 130 x x x x x 02.8 2.8 250 0.0675 170 x x x x x 003.* 3 250 0.0593 200 x x x x x 03.2 3.2 250 0.0529 209 x x x x x 004.* 4 250 200@250Vac 10KA@125Vac 0.0311 76.1 x x x x x 005.* 5 250 0.0214 140 x x x x x 6.25* 6.25 250 0.0154 242 x x x x x 06.3 6.3 250 0.0154 242 x x x x x 007 .* 7 250 0.0128 347 x x x x x 008.* 8 250 0.0111 445 x x x x x 010.** 10 250 300A@32Vac 0.0083 760 x x x x 010.* 10 32 0.0083 760 x 012. 12 32 0.0065 1200 x 015. 15 125 0.0050 1870 x x x x 015. 15 32 0.0050 1870 x 020. 20 32 0.0022 9560 x 025. 25 32 0.0017 16500 x 030. 30 32 0.0012 26900 x These 2 ratings are designed for special voltage requirement. For 10A, it is available as 250Vac rated and the part number is 0313010. MX250P; for 15A, it is available as 125Vac rated and the part number is 0315015.MX125P .

319© 2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 313/315 Series 3AG > Time Lag > 313/315 Series Please refer to www.littelfuse.com/series/313.html or /315.html for current information. 313/315 Series Average Time Current Curves 1000 100 0.1 0.01 1/16A 0.05 0.1 1 10 100 1000 1/10A .175A 1/4A 3/8A 1/2A 3/4A 1 1/2A 10A 12A 15A 20A 30A 25A TIME IN SECONDS CURRENT IN AMPERES T emperature Rerating Curve A B A B Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: 150° C Preheat Time: 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters: A - For 313/315 Series, from 10mA to 150mA B - For all other ampere ratings of 313/315 series

Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology 320 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 313/315 Series 3AG > Time Lag > 313/315 Series Please refer to www.littelfuse.com/series/313.html or /315.html for current information. Product Characteristics Dimensions 313 000P Series 31 5 000P Series 6.35 (.25") 32.385 (1.275") 31.75 (1.25") 6.985 (.275") 38.1 (1.50") TYP. Axial Lead Material: Tin coated copper. 1 100/ Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width

313 Series

315 Series

Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper T erminal Strength MIL -STD-202G, Method 211A, Test Condition A Solderability Reference IEC 60127 Second Edition 2003-01 Annex A Product Marking Cap1: Brand logo, current and voltage ratings Cap2: Series and agency approval marks Operating Temperature –55ºC to +125ºC Thermal Shock MIL -STD-202G, Method 107G, Test Condition B: (5 cycles -65°C to +125°C) Vibration MIL -STD-202G, Method 201 A Humidity MIL -STD-202G, Method 103B, Test Condition A: High RH (95%) and Elevated temperature (40°C) for 240 hours Salt Spray MIL - STD-202G, Method 101D, Test Condition B Part Numbering System

0313 M X Pxxxx

X = Filler M = 1000 Refer to Amp Code column of Electrical Characteristics Table