30R300UPR LITTELFUSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Features
Applications
t3P)4DPNQMJBOUBOE lead-free t'BTUUJNFoUPUSJQ t$VSFE nBNFSFUBSEBOU epoxy polymer insulating material meets UL 94V-0 requirements t64#IVCT QPSUT and peripherals t$PNQVUFSTQFSJQIFSBMT t.PUPSQSPUFDUJPO t(FOFSBMFMFDUSPOJDT t"VUPNPUJWFBQQMJDBUJPOT I hold = Hold current: maximum current device will pass without tripping in 23°C still air. I trip = Trip current: minimum current at which the device will trip in 23°C still air. V max = Maximum voltage device can withstand without damage at rated current (Imax) I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) Pd = Power dissipated from device when in the tripped state at 23°C still air. R min = Minimum resistance of device in initial (un-soldered) state. R 1max = Maximum resistance of device at 23°C measured one hour after tripping. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. Agency Approvals AGENCY AGENCY FILE NUMBER E183209 R501 19318
Revised: October 24, 2008 ©2008 Littelfuse, Inc. POL YFUSE® Resettable PTCs 30R Series Radial Leaded > 30R Series Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/30R.html for current information. T emperature Rerating Curve -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 10% 30% 50% 70% 90% 110% 130% 150% 170% Temperature (°C) Percentage of Rated Current Ambient Operation Temperature -40°C -20°C 0°C 23°C 40°C 50°C 60°C 70°C 85°C Part Number Hold Current (A) T emperature Rerating Average Time Current Curves The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. 0.01 0.1 100 1000 10000 100000 0.90A 1.10A 1.35A 1.60A 1.85 A 2.50A 3.00A 4.00A 5.00A 6.00A 7.00A 8.00A 9.00A30R 0.1 1 10 100 Current in Amperes Time in Seconds
©2008 Littelfuse, Inc. Revised: October 24, 2008 POL YFUSE® Resettable PTCs ©2008 Littelfuse, Inc. 30R Series Radial Leaded > 30R Series Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/30R.html for current information. 30R Series Environmental Specifications Operating/Storage T emperature -40°C to +85°C Maximum Device Surface T emperature in T ripped State 125°C Passive Aging +85°C, 1000 hours -/+5% typical resistance change Humidity Aging +85°C, 85% R.H., 1000 hours -/+5% typical resistance change Thermal Shock +85°C to -40°C 10 times -/+5% typical resistance change Solvent Resistance MIL–STD–202, Method 215F No change Moisture Resistance Level Level 2, J–STD–020C Physical Specifications Lead Material 0.90-2.50A: Tin-plated Copper clad steel 3.00-9.00A: Tin-plated Copper Soldering Characteristics Solderability per MIL–STD–202, Method 208E Insulating Material Cured, flame retardant epoxy polymer meets UL94V-0 requirements. Device Labeling Marked with ‘LF’, voltage, current rating, and date code. Soldering Parameters - Wave Soldering Pre-Heating Zone Refer to the condition recommended by the flux manufacturer. Max. ramping rate should not exceed 4°C/Sec. Soldering Zone Max. solder temperature should not exceed 260°C Cooling Zone Cooling by natural convection in air. Preheating 160 190 220 260 5 max. Temperature (°C) Soldering Cooling 60 min. Time(s)
Revised: October 24, 2008 ©2008 Littelfuse, Inc. POL YFUSE® Resettable PTCs 30R Series Radial Leaded > 30R Series Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/30R.html for current information. A E B C D Dimensions Part Number A B C D E Physical Characteristics 110U XXXX Voltage Rating Current Rating Date Code (Contact Littelfuse for additional information) Littelfuse Trademark Single Sided Marking Part Marking System
©2008 Littelfuse, Inc. Revised: October 24, 2008 POL YFUSE® Resettable PTCs ©2008 Littelfuse, Inc. 30R Series Radial Leaded > 30R Series Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/30R.html for current information. 30R Series Packaging Part Ordering Number System PACKAGING STYLE R: RADIAL I HOLD CURRENT CODE (SEE TABLE BELOW) QUANTITY CODE: F=200 H=100 M=1000 P=2000 U=500 BLANK: Bulk R: Tape & Ammo
30 R 250 U P R
TYPE: U (30VDC) SERIES VOLTAGE RATING (VDC) Part Number Ordering Number I hold (A) I hold Code Packaging Option Quantity Quantity & Packaging Codes 30R090 30R090UU 0.90 090 Bulk 500 U 30R090UPR Tape and Ammo 2000 PR 30R110 30R110UU 1. 10 110 Bulk 500 U 30R110UPR Tape and Ammo 2000 PR 30R135 30R135UU 1 .35 135 Bulk 500 U 30R135UPR Tape and Ammo 2000 PR 30R160 30R160UU 1 .60 160 Bulk 500 U 30R160UPR Tape and Ammo 2000 PR 30R185 30R185UU 1 .85 185 Bulk 500 U 30R185UPR Tape and Ammo 2000 PR 30R250 30R250UU 2.50 250 Bulk 500 U 30R250UPR Tape and Ammo 2000 PR 30R300 30R300UU 3.00 300 Bulk 500 U 30R300UPR Tape and Ammo 2000 PR 30R400 30R400UF 4.00 400 Bulk 200 F 30R400UMR Tape and Ammo 1000 MR 30R500 30R500UF 5.00 500 Bulk 200 F 30R500UMR Tape and Ammo 1000 MR 30R600 30R600UF 6.00 600 Bulk 200 F 30R600UMR Tape and Ammo 1000 MR 30R700 30R700UF 7 .00 700 Bulk 200 F 30R700UMR Tape and Ammo 1000 MR 30R800 30R800UH 8.00 800 Bulk 100 H 30R900 30R900UH 9.00 900 Bulk 100 H
Revised: October 24, 2008 ©2008 Littelfuse, Inc. POL YFUSE® Resettable PTCs 30R Series Radial Leaded > 30R Series Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/30R.html for current information. Dimension EIA Mark IEC Mark Dimensions Dim. (mm) T ol. (mm) Carrier tape width WW 18 -0.5 / +1 .0 Hold down tape width: W4 W0 11 min. Top distance between tape edges W6 W2 3 max. Sprocket hole position W5 W1 9 -0.5 / +0.75 Sprocket hole diameter* D0 D0 4 -0.32 / +0.2 Abscissa to plane(straight lead) HH 18.5 -/+ 3.0 Abscissa to plane(kinked lead) H0 H0 16 -/+ 0.5 Abscissa to top: 30R090-30R185 H1 H1 32.2 max. Abscissa to top: 30R250-30R900 45.0 max. Overall width w/o lead protrusion: 30R090-30R185 C1 42.5 max. Overall width w/o lead protrusion: 30R250-30R900 56 max. Overall width w/ lead protrusion: 30R090-30R185 C2 43.2 max. Overall width w/ lead protrusion: 30R250-30R900 57 max. Lead protrusion L1 l1 1 .0 max. Protrusion of cut out LL 11 max. Protrusion beyond hold–down tape l2 l2 Not specified Sprocket hole pitch: 30R090-30R300 P0 P0 12.7 -/+ 0.3 Sprocket hole pitch on: 30R400-30R900 P0 P0 25.4 -/+ 0.5 Device pitch: 30R090-30R300 12.7 Device pitch: 30R400-30R900 25.4 Pitch tolerance 20 consecutive. -/+ 1 Tape thickness tt 0.9 max. Tape thickness with splice: 30R090-30R250 t1 1 .5 max. Tape thickness with splice: 30R300-30R900 t1 2.0 max. Splice sprocket hole alignment 0 -/+ 0.3 Body lateral deviation Δh Δh 0 -/+ 1 .0 Body tape plane deviation Δp Δp 0 -/+ 1 .3 Ordinate to adjacent component lead* P1 P1 3.81 -/+ 0.7 Ordinate to adjacent component lead* 7 .62 -/+ 0.7 Lead spacing: 30R090–30R400 FF 5.08 -/+ 0.8 Lead spacing: 30R500-30R900 FF 10.18 -/+ 0.8 T ape and Ammo Specifications Devices taped using EIA468-B/IE286-2 standards. See table below and Figure 1 for details. *Differs from EIA Specification
©2008 Littelfuse, Inc. Revised: October 24, 2008 POL YFUSE® Resettable PTCs ©2008 Littelfuse, Inc. 30R Series Radial Leaded > 30R Series Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/30R.html for current information. 30R Series A B L1 P0 D0 F L W Reference plane Δh Δh H Δh Δp Direction of unreeling Cross section A - B t T ape and Ammo Diagram Figure 1
Click to View Pricing, Inventory, Delivery & Lifecycle Information: Littelfuse: 30R400 30R090UPR 30R090UU 30R110UPR 30R110UU 30R135UPR 30R135UU 30R160UPR 30R160UU 30R185UPR 30R185UU 30R250UPR 30R250UU 30R300UPR 30R300UU 30R400UF 30R400UMR 30R500UF 30R500UMR 30R600UF 30R600UMR 30R700UF 30R700UMR 30R800UH 30R900UH R30R500 30R900UMR 30R400-PB 30R090-PB 30R110-PB 30R135-PB 30R500-PB 30R700-PB 30R800-PB 30R900-PB 30R600-PB 030R0135WR 030R0110WR 030R0400DR 030R0090WR 030R0300DR