0271060000 WEIDMULLER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Polyamide PA 6.6 | Modular feed-through terminals | 16 mm² - 1 - General ordering data Order No. 0271060000 Part designation SAK 16 Version Feed-through terminal, 16 mm², Screw connection, PA 66, beige, TS 32 EAN 4008190078324 Qty. 50 pc(s). Product notes Note, ordering data If QIs are aligned side by side, then a TW/AP must be used. Note, technical data Twin wire end ferrules ZH 2.5 - ZH 16 can be used. PT OKIECEx/ATEX rating data EU-type examination certificate KEMA97ATEX1798U Download, German KEMA97ATEX1798U_d.pdf Download English KEMA97ATEX1798U_e.pdf IECEx Certificate of Conformity IECEXKEM06.0014U ATEX voltage 690 V ATEX current 66 A ATEX conductor cross-section 16 mm² IECEx voltage 690 V IECEx current 66 A IECEx conductor cross-section 16 mm² Voltage when using cross-connections CrossConnectionGuide.pdf Operating temperature range Einsatztemperaturbereich siehe EG- Baumusterprüfbescheinigung/IECEx-Certificate of Conformity Marking EN 60079-7 Ex e II Marking ATEX Directive 94/9/EC Ex II 2 G D Additional technical data Colour of insulating material beige Connection direction on side End plate required Yes Explosion-tested version "Ex e" No Installation advice TS 32 Insulating material PA 66 Levels cross-connected internally No No. of identical terminals 1
Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Polyamide PA 6.6 | Modular feed-through terminals | 16 mm² - 2 - Additional technical data No. of levels 1 No. of terminal strips per level 2 Open sides right Operating temperature range - 50 °C, + 100 °C Type of connection Screwed Type of mounting Snap-on UL 94 flammability rating of insulation material V2 Version Feed-through terminal CSA rating data Voltage (CSA) 600 V CSA current 87 A Min. cross-section (CSA) AWG 14 Max. cross-section (CSA) AWG 6 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) 4 mm² Flexible with ferrule, max. (DIN 46228 pt 1) 16 mm² Conductors for clamping (rated connection) Clamping range, min. 2.5 mm² Clamping range, max. 16 mm² Type of connection Screw connection 2nd type of connection screwed Connection direction on side No. of connections 2 Stripping length 15 mm Clamping screw M 4 Blade size 1.0 x 5.5 mm Gauge to IEC 60947-1 B6 Solid, min. 2.5 mm² Solid, max. 10 mm² Stranded, min. 4 mm² Stranded, max. 16 mm² Flexible, min. 4 mm² Flexible, max. 16 mm² Flexible with ferrule, min. (DIN 46228/1) 4 mm² Flexible with ferrule, max. (DIN 46228/1) 16 mm² Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) 16 mm² Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) 16 mm² Twin wire-end ferrule, min. 1.5 mm² Twin wire end ferrule, max. 10 mm² AWG conductor size, min. AWG 12 AWG conductor size, max. AWG 6 AWG conductor size, min. 3.31 mm² AWG conductor size, max. 16 mm²
Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Polyamide PA 6.6 | Modular feed-through terminals | 16 mm² - 3 - Dimensions Width 12 mm Height of lowest version 57.5 mm Length 50 mm TS 32 offset 25 mm Rating data Rated cross-section 16 mm² Rated voltage 1,000 V Rated impulse voltage 8 kV Rated current 76 A Standards IEC 60947-7-1 Current with max. conductor 76 A Pollution severity 3 UL rating data Voltage (UL) 600 V Current (UL) 80 A Min. cross-section (UL) AWG 12 Max. cross-section (UL) AWG 4 Approvals Approvals institutes Downloads DXF 04038_SAK_16_DXF.dxf STEP 0271060000_04038_SAK_16_STP.stp Classifications ETIM 2.0 EC000897 ETIM 3.0 EC000897 eClass 4.1 27-14-11-20 eClass 5.0 27-14-11-20 eClass 5.1 27-14-11-20
Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Polyamide PA 6.6 | Modular feed-through terminals | 16 mm² - 4 - Similar products Order No. Part designation Version