0265.062V LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Electrical Characteristics

% of Ampere Rating Ampere Rating Opening Time 100% 1/16–15 4 Hours, Min. 200% 1/16–7 1 Second, Max. 10 3 Second, Max. 15 10 Second, Max. Ampere Rating (A) Amp Code Max Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Agency Approvals QPL 0.062 .062 125 300 amperes at rated voltage VDC 50 amperes at rated voltage VAC

7.0000 XXX

0.125 .125 125 2.1000 XXX 0.250 .250 125 0.7100 XXX 0.375 .375 125 0.4200 XXX 0.500 .500 125 0.2800 XXX 0.750 .750 125 0.1700 XXX 1. 0 0 001 . 125 0.1250 XXX 1 .50 01 .5 125 0.0800 XXX 2.00 002. 125 0.0550 XXX 2.50 02.5 125 0.0420 XXX 3.00 003. 125 0.03515 XXX 4.00 004. 125 0.0230 XXX 5.00 005. 125 0.0140 XXX 7. 0 0 007 . 125 0.0100 XXX 10.0 010. 125 0.00645 XXX 15.0 015. 32 0.0040 XXX t .JMJUBSZHSBEFBWBJMBCMF t 3P)4DPNQMJBOU t "WBJMBCMFGSPNN" to 15A t "WBJMBCMFJOBYJBMBOE radial leaded t "WBJMBCMFJONJOJBUVSF and subminiature formats QPL QPL Revised: February 6, 2010

Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology 224 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 265/266/267 Series Please refer to www.littelfuse.com/series/265.html / 266.html/or /267.html for current information. PICO® > Very Fast Acting > 265/266/267 Series Average Time Current Curves 100 0.1 0.01 0.001 10 100 10000.1 1 TIME IN SECONDS CURRENT IN AMPERES 1/16A 1/8A 1/4A 3/8A 1/2A 3/4A 1 1/2A 2 1/2A 10A 15A T emperature Rerating Curve Soldering Parameters\\ Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: 150° C Preheat Time: 60-180 seconds Solder Pot Temperature: 280° C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters: Note: 1 . Derating depicted in this curve is in addition to the standard derating of 25% for continuous operation.

225© 2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 265/266/267 Series Please refer to www.littelfuse.com/series/265.html / 266.html/or /267.html for current information. PICO® > Very Fast Acting > 265/266/267 Series 265/266/267 Materials Body: White Thermoplastic Gold-Plated Copper Leads, Type II Weight .32 Grams Solderability MIL -STD-202, Method 208 Lead Pull Force MIL -STD-202, Method 211, Test Condition A (will withstand a 5 lbs. axial pull test) AQL (Electrical Characteristics): Certified to 1% AQL Sampling Per MIL -STD-105, Inspection Level II. Traceability and Identification Records: Controlled by lot number and retained on file for a minimum of three years. Copies of Lot Certification Test data available when requested with order Options Special screening tests, burn-in, etc. can be supplied on special order to meet specific requirements. For information on higher current ratings, contact Littelfuse. 267 series fuses are offered with optional solder coated leads. To order, enter XT as the end suffix (see Part Numbering System section) Product Characteristics Operating Temperature –55ºC to +125ºC Shock MIL -STD-202, Method 213, Test Condition I (100 G’s peak for 6 milliseconds). Vibration MIL -STD-202, Method 201 (10–55 Hz); MIL -STD-202, Method 204, Test Condition C (55–2000 Hz at 10 G’s Peak) Salt Spray MIL -STD-202, Method 101, Test Condition B Seal T est MIL -STD-202, Method 112, Test Condition A Insulation Resistance (After Opening) MIL -STD-202, Method 302, Test Condition A (1/2 Megohm minimum) Thermal Shock MIL -STD-202, Method 107 , Test Condition B (–65°C to 125 °C). Moisture Resistance MIL -STD-202, Method 106 Fuses T o MIL SPEC

265 Series (except 1/16 ampere

rating) is available in FM08A on QPL for MIL -PRF-23419/8. To order, change 265 to 267 3/4 A 3/4 A Transparent Insulating Sleeve Transparent Insulating Sleeve (.28") 7.11 (.28") 2.36 (.093") DIA. 2.36 (.093") DIA. 37.33 (1.47") (Note 1: 9.14 (.36") for 15 amp rating) 265 000 Series 266 000 Series 38.1 38.1 Dimensions Packaging Packaging Option Quantity Quantity & Packaging Code Bulk Pack 5 V Part Numbering System 0267 xxxx V XT Quantity & Packaging Code Lead Option Code Amp Code Series Refer to Amp Code column of Electrical Characteristics Table V = (All series) 5 quantity bulk pack Blank = (All series) standard lead XT = (267 series only) solder coated lead option

Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology 226 © 2009 Littelfuse, Inc. Specifications are subject to change without notice.