026239-000

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 24

Technical content

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 2Application Equipment Table of C ontents Application E quipm ent CV-1981 and RBK-ILS- Installation of splice sealing products adjacent to

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 Engineering N otes

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 2Application Equipment HL 19 10 E /HL 2 0 10 E L ight Duty Heating Tool Product Facts I L ight duty, portable hot air heater The HL2010E tool is switched on and off at the three-stage switch and the temperature can be contin - uously adjusted over a range of 50°C-630°C by the pushbuttons. The tempera - ture can be increased or reduced by 10°C steps. An LCD display shows the actual temperature. The HL1910E tool is switched on and off at the two-stage switch and the temperature can be contin - uously adjusted over a range of 50°C-600°C at the thumbwheel (the numbers on it serve as guide only, 1 means 50°C and max. temperature of 600°C is attained at 9). A bench stand allowing use of both the HL2010E and the HL1910E as a bench tool is available as an option. Only two reflectors are required to cover most applications of heat-shrink - able tubing and SolderSleeve terminations. There is an adaptor avail - able, which allows the use of PR type reflectors. The HL2010E and HL1910E hot air heat guns are designed to work with a standard line voltage (120V) on a wide variety of Raychem heat-shrinkable products. These tools are suitable for occasional use and are not recommended for applications requiring high duty cycles. Both tools supply forced hot air with an adjustable heat setting to meet the requirements of many different installation situations. A three position switch controls the air flow Available in: Am ericas Europe Asia Pacific II I

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products HL 19 10 E /HL 2 0 10 E (Continued) D escription Part N um ber H L2010E-120V tool: H L2010E-K IT -120V C J2087 -000 H L1910E-120V tool: H L1910E-K IT -120V C J2086 -000 H L2010E/H L1910E A ccessories: H L1802E-07 46 16 - SolderSleeve Term inators R eflector 832011-000 H L1802E-07 0519 - H eat-Shrinkable Tubings R eflector 0226 11-000 H L1802E-A DA P T -P R A daptor for P R Series R eflector 444817 -000 P R -13C -R EFLEC TO R 99197 4-000 P R -25D-R EFLEC TO R 989523-000 H L2010E-B ENC H -STD C J2085-000 Ordering Inform ation Technical Specifications V oltage 120V A C Pow er 2000W A ir flow 150 - 500 l/m in Weight 920g Length 280 m m Noise <7 0dB

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 2Application Equipment Therm oG un HG M edium Duty Heating Tool Product Facts I Stand-m ounted or handheld, rugged unit for heavy-duty use I B uilt-in stand and turbo-fan- driven blow er I Adjustable side vents I Adjustable tem perature I 1680 to 2 160 w atts I L arge reflector size I High heat output for fast installation Specifications Applications Used for installing molded parts onto adapters or harnesses and installing a broad range of heat- shrinkable products, includ - ing boots and tubing up to three inches in diameter. Available in: Am ericas Europe Asia Pacific II M odel Pow er R equirem ents Input W atts Tem perature R ange C FM * R PM ** H G -501A 120 V , 6 0 H z, 14 A 16 80 26 0°C –399°C [500°F–7 50°F] 23 17 00 H G -502A 230 V , 50/6 0 H z, 7 A 16 80 26 0°C –399°C [500°F–7 50°F] 23 17 00 H G -7 51A -C 120 V , 6 0 H z, 18 A 216 0 399°C –538°C [7 50°F–1000°F] 23 17 00 H G -7 52A 230 V , 50/6 0 H z, 9 A 17 40 399°C –538°C [7 50°F–1000°F] 23 17 00 *C FM = C ubic feet per m inute. **R P M = R evolutions per m inute.

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products Therm oG un HG (Continued) M odel* H ousing C olor Part N o. H G -501A R ed 46 2047 -000 H G -502A R ed 38936 3-000 H G -7 51A -C R ed 926 935-000 H G -7 52A R ed 026 239-000 Accessories Tubing Application Part N o. A -16 0-H G standard reflector Diam eters up to 19.05 [0.7 5] 991017 -000 A -17 0-H G large tubing reflector Diam eters of 19.05–50.8 [0.7 5–2] 991018-000 TG -23 sm all boot reflector Diam eters up to 44.5 [1.7 5] 991026 -000 TG -24 large boot reflector — 991027 -000 *C om plete w ith bench stand. Ordering Inform ation Accessories A-160 -HG reflector (P/N 9 9 10 17) for short lengths of tubing up to 19.05 [.75] in diameter. Must be ordered separately. A-170 -HG reflector (P/N 9 9 10 18) for short lengths of tubing 19.05–50.8 [.75–2] in diameter. Must be ordered separately. TG -2 3 reflector (P/N 9 9 10 2 6) for boots up to 44.45 [1.75] in diameter. Must be ordered separately.

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 2Application Equipment C V-19 81 and C V-19 83 Heavy Duty Hot-Air Heating Tool Product Facts I R obust, double-insulated, heavy-duty unit I Highest-w attage unit (160 0 –2 2 60 w atts) I Integral stand that allow s use as bench tool I Safe, quiet operation I Precisely variable tem perature I Variety of reflectors available I E asy fixturing for dual opposing heating Specifications Applications Used for installing dual wall or single wall tubing up to three inches in diameter and for installing SolderSleeve devices. Closed loop version (PID) also available. Available in: Am ericas Europe Asia Pacific II I Electrical Supply C V -1981-M K 2 120 V and 230 V C V -1983 120 V and 230 V C V -1981 P ID 120 V and 230 V Pow er C onsum ption C V -1981-M K 2 16 00 W C V -1983 226 0 W/306 0 W C V -1981 P ID 16 00 W Total System N oise C V -1981-M K 2 6 5dB C V -1983 6 5dB C V -1981 P ID >7 0dB Length C V -1981-M K 2 340 m m [13.4 in] C V -1983 320 m m [12.6 in] C V -1981 P ID 350 m m [13.8 in] W eight C V -1981-M K 2 1.3 K g [2.90 lb] C V -1983 1.5 K g [3.30 lb] C V -1981 P ID 1.4 K g [3.10 lb] Air Flow C V -1981-M K 2 M ax 230 l/m in C V -1983 M ax 500 l/m in C V -1981 P ID 230 l/m in Product R ange A ll dual w all, single w all and m olded part products. V arious devices products. For other R aychem products , contact TE.

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products C V-19 81 and C V-19 83 (Continued) Application Part N o. P R -12 reflector Tubing: 6 .3–25.4 m m [0.25 in–1 in] 99197 3-000 P R -13 reflector Tubing: U p to 6 m m [0.25 in] 99196 3-000 P R -13C reflector Large SolderSleeve products 99197 4-000 P R -21 reflector Tubing: U p to 25.4 m m [1 in] 991984-000 P R -24 reflector Tubing/m olded parts: 25.4–34.93 m m [1 in–1.38 in] 99196 4-000 P R -24A reflector Tubing/m olded parts: 34.93–6 0.33 m m [1.38 in–2.38 in] 991989-000 P R -25 reflector SolderSleeve products: U p to 7 m m [0.28 in] 99196 5-000 P R -25D reflector SolderSleeve products: 6 .3–12.7 m m [0.25 in–0.50 in] 989523-000 P R -26 reflector Sm all SolderSleeve products 99196 7 -000 P R -33 reflector SolderSleeve products: 19.05–25.4 m m [0.7 5 in–1 in] 997 7 6 8-000 A D-196 2 adapter for larger-barrel C V -1983 — 98917 2-000 P R -34 reflector SolderSleeve products: 12.0–20.0 m m [0.47 in–0.7 9 in] 989111-000 P R -51 Special narrow reflector for m olded part transitions 11306 9-000 [21.5 x 3.5 m m nozzle] [.85 in x .14 in] Accessories Ordering Inform ation Equipm ent D escription Part N o. Voltage H z C V -1981-120V 16 00W-C A NM K 2 A 427 16 -000* 120V 50/6 0 H z C V -1981-120V 16 00W-U K M K 2 E957 98-000 120V 50/6 0 H z C V -1981-230V 16 00WM K 2 813914-000 230V 50/6 0 H z C V -1981-230V 16 00W-SEV M K 2 F25836 -000 230V 50/6 0 H z C V -1981-230V 16 00-U K M K 2 34097 0-000* 230V 50/6 0 H z C V -1983-110V -226 0W-U K 4417 53-000 120V 50/6 0 H z C V -1983-220V -226 0W 7 7 3898-000 230V 50/6 0 H z C V -1983-220V -226 0W-U K 985426 -000 230V 50/6 0 H z C V -1983-220V -306 0W 53836 1-000 230V 50/6 0 H z C V -1983-220V -306 0W-U K 23186 6 -000 230V 50/6 0 H z C V -1981-120V -16 00W-C A NP IDF 839218-000 120V 50/6 0 H z C V -1981-120V -16 00W-U K P ID 928826 -000 120V 50/6 0 H z C V -1981-230V -16 00WP ID 9587 7 0-000 230V 50/6 0 H z C V -1981-230V -16 00W-SEV P IDF 43436 6 -000 230V 50/6 0 H z C V -1981-230V -16 00W-U K P IDF 385828-000 230V 50/6 0 H z A D-196 2 98917 2-000 —— C V -1981-M K 2 C V -1983 C V -1981-P ID C V -1983 B arrel A dapter *Note: A 427 16 supersedes and replaces 538005 34097 0 supersedes and replaces 923002

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 2Application Equipment IR -189 1 Heating W ork Station for Short L ength Tubing Product Facts I Autom atic cycle start once heater is m anually positioned over product, w hich gives im proved process control (recom m ended for adhesive- lined heat-shrinkable tubing e.g. sealing applications) I Autom atic heating head retraction at end of cycle prevents dam age to com ponents I M ultiple product fixture assem blies give increased process rates I C ooling fan above each fixture assem bly m aintains holding fixture at an acceptable tem perature before initiating the heating cycle. The operator then continues with loading/ unloading the other work station whilst the heating cycle is taking place. The IR-1891-220V-Shuttle- Retn is provided with closed loop temperature control and in addition the heat head is ‘locked’ into position by use of an elec - tromagnet during the heat - ing cycle. Once the other workstation has been loaded and the first installation is complete, the heat head is moved into position over the product and the next heating cycle initiated. Heating times vary typically from 3 to 30 seconds depending on the size and type of tubing product. Process rates up to 1200 pieces/hour can be achieved depending on the heating time and the time taken by the operator to load and unload the work - pieces. The installation temperature/power can be varied according to product type/size and required cycle times. The heating elements, which are continuously energized, are of the infra- red medium wave length type and consist of a coiled resistance wire contained in quartz glass tubes. The closed loop temperature control uses similar elements but having integral thermo - couple sensors.

Applications

The IR-1891 is suitable for the installation of a range of Raychem heat-shrinkable tubing products onto a variety of small components, e.g. ring terminals, Faston terminals and small con - nectors etc. The machine is provided with two work stations and a moveable heating head. Each workstation is pro - vided with supports for tooling fixtures (which must be specified and ordered separately). These support the workpieces and locate the tubing products. The operator loads the work - pieces into the fixtures at one of the workstations, ensures that the tubing product is correctly posi - tioned and then slides the heat head into position Available in: Am ericas Europe Asia Pacific I

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products IR -189 1 (Continued) D escription Part N o. *IR -1891-220V -Shuttle-R etn 289588-000 *IR -1891-220V -R etn-Syl 6 13148-000 *N ote: The descriptions given here DO NO T include the supply of the necessary tooling fixtures.These are designed for each individual application. Ordering Inform ation D escription Part N o. G rippers: IR -1891-SI-G R P -16 5-R D-1m m R ed G ripper w ith 1m m hole 6 296 02-000 IR -1891-SI-G R P -16 5-C L-2m m C lear G ripper w ith 2m m hole 1126 7 6 -000 IR -1891-SI-G R P -16 5-B K -3m m B lack G ripper w ith 3m m hole F83221-000 IR -1891-SI-G R P -16 5-WT -6 m m White G ripper w ith 6 m m hole 6 296 02-000 Fixtures: IR -1891-Q uick-R el-ESS-6 /1 ESS C ap (6 /1) Fixture 096 7 35-000 IR -1891-Q uick-R el-ESS-8/2 ESS C ap (8/2) Fixture 148597 -000 IR -1891-Tool-Fixt-B as-ESS B ase U nit for Fixtures 7 6 0221-000 N ote: A w ider range of tooling fixtures and grippers designed for previous applications are available. P lease contact TE for details. Accessories Technical Specifications Electrical Supply 230 V Single P hase Pow er C onsum ption 16 00 W O perating Tem perature 6 50°C m ax P rocess R ate 1200 / hour m axim um depending on application and operator H eating Tim es 3 to 30 seconds depending on application System Noise < 7 0 dB Dim ensions – 5086 36 -000 L1100 x H 6 50 x D500 m m [L43 x H 25 x D20 in] Dim ensions – 6 13148-000 / 16 7 309-000 / 289588-000 L1100 x H 900 x D500 m m [L43 x H 35 x D20 in] B ase P late Dim ensions 289588-000 / 16 7 309-000 L1040 x D450 m m [L41 x D18 in] B ase P late Dim ensions 6 13148-000 L1040 x D397 m m [L41 x D16 in] Product R ange Wide range of R aychem tubing products in particular LSTT, R NF-3000, R NF-100, H TA T, A TU M . M axim um diam eter 20 m m [0.8 in] and m axim um length 6 0 m m [2.0 in]

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 2Application Equipment M odel 81C E Discrete Heater for Heat- Shrinkable Tubing Products Product Facts I C losed-loop tim e and tem perature control I C ontrolled process I Adaptable for different I C E approved for w orldw ide use I Heater operation and over tem perature alarm lights into the upper heating ele - ment connected to a closed loop temperature controller. An alarm light illuminates whenever the actual heat - ing element temperature varies from the set point temperature. C ontrolled Oven Dw ell Tim e The oven dwell time is selected using a 3-digit thumb wheel digital timer. The time can be set between 1 and 999 sec - onds for precise heating ensuring each assembly being processed sees the same precise amount of heat. M inim al Skill R equirem ents There are clearly marked guides for aligning the assembly as well as the tubing or device being processed. The operator only has to center the assembly, then the tubing, and load it into the spring loaded jaws on either side of the heating chamber. The jaws grip and carry the assembly into the heating chamber and back to the home position when the time has expired. A protec - tion circuit prevents the cycle from being initiated if the oven is not at the desired set point, prevent - ing assemblies from being processed incorrectly. The small footprint allows the processor to be placed in close proximity to a welder, allowing a single operator to accomplish two tasks. Versatility The processor is designed to process a broad range of Raychem heat-shrinkable tubing products up to 25 mm [1.0 in] in diameter and 127 mm [5.0 in] in length. The infrared energy source is well-suited to effi - Certified discrete-type table top heater which provides a controlled process for recovering a wide variety of Raychem heat-shrinkable products onto wire assem - blies or other suitable sub - strates. Assemblies are loaded into spring loaded jaws on either side of the heating chamber which takes the assemblies into the oven for a pre-set number of sec - onds, then returns them to the home position for removal. C ontrolled Heating Zone The Model 81 CE processor has two stamped foil heating elements that are manufac - tured to a strict wattage specification. Consistent temperatures are controlled by a thermocouple embedded Available in: Am ericas Europe Asia Pacific II I cient processing of either single-wall or adhesive- lined tubing. Temperature and time can be controlled to accommodate a wide variety of products and substrates. Safety Features:

• Circuit breaker for current surges
• Emergency Stop
• Pinch points eliminated by the housing design
• An over-temperature switch that shuts off all power in the event of an overheat condition
• Automatic cool-down cir - cuit to prevent heat dam - age to integral components
• Circuit to prevent cycle initiation until the oven is up to temperature

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products M odel 81C E (Continued) Electrical Part N o. 071 96 5 Part N o. 704 393-000 Pow er R equirem ents 120 V A C , 1 ∅, 50/6 0 H z, 15 A 220 V A C , 1 ∅, 208-240 V A C , 15 A H eating elem ents 2 ea. 400 w att stam ped foil w ith quartz face infrared, one top & bottom Tim ing System Eagle Digital Tim er, 1 to 999 seconds M echanical P neum atic cylinder requirem ent 30 - 40 P SI clean shop air for jaw traversing D im ensions cm [in.] C ontrol box w eight 7 .7 K g [17 lb] H eating cham ber dim ensions 38 cm [15 in] L x 24 cm [9.5 in] W x 34.3 cm [13.5 in] H H eating cham ber w eight 18 K g [40 lbs] Shipping dim ensions 6 1 cm [24 in] x 6 1 cm [24 in] x 53 cm [21 in] Shipping w eight 41 K g [90 lbs] Tubing sizes Inside diam eter U p to 25 m m [1 in] Length U p to 127 m m [5 in] Version D escription Part N o. M odel 81C E -120 V olt C LTEQ -M 81C E-120V -H TR 07 196 5-000 M odel 81C E - 220 V olt C LTEQ -M 81C E-240V -H TR 7 04393-000 Specifications and Dim ensions

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 2Application Equipment R B K -IL S-Processor M kII Installation of Splice Sealing Products Adjacent to Ultrasonic W elder Product Facts I Increased heating elem ent life I Installation tim es, tem peratures and product size inform ation (individual selection) I Sequenced installations I Operator key lock/passw ord protection levels I Autom atic heater retraction on m ains failure I Autom atic calibration (single cycle) I R S2 32 interface allow s tim e, tem perature and product sizes for the next installation to be transferred from a rem ote m achine (e.g. an ultrasonic w elding tool) I M achine hours and installation cycle counters I Softw are upgradeable to support special applications I Air cooling can be provided to an optional stub splice fixture in the R B K -Proc-M k2 - Proc-Aircool version I Automatic communication with upstream ultrasonic welder can allow time and temperature to be automatically set without operator intervention. The operator is able to efficiently load both machines and so minimize ‘dead time’. Installing Raychem splice sealing products immediately after welding gives reduced installation time and earliest possible mechanical pro - tection for the welded joint. The operator positions the splice sealing product cen - trally over the splice joint and then locates the assembly into the gripper mechanism. The wire assembly is automatically ejected, with the splice sealing product installed and the joint area sealed, insulated and strain relieved. In-line or stub-type splices can be installed. unit designed specifically to install splice sealing products onto ultrasonically welded or crimped splice joints used in automotive harnesses. The tool can operate in several modes: I Stand-alone — operator sets time and temperature. I Sequenced — preset times and temperatures can be sequenced auto - matically (and can also be randomly selected from sequence stored.) Available in: Am ericas Europe Asia Pacific II I

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products R B K -IL S-Processor M kII (Continued) D escription Part N o. Equipm ent R B K -P roc-M k2-P rocessor 7 40331-000 R B K -P roc-M k2-P roc-A ircool A 96 930-000 A ccessories Stub splice fixture - R B K -ILS-P roc-Stub-Sp-Fix 9817 21-000 A ir cooled stub splice fixture - R B K -ILS-P roc-A ir-C ool-K it 843800-000 8 m m ring term inal fixture - R B K -ILS-P roc-Term fix-08m m 049857 -000 Ordering Inform ation Technical Specifications Electrical Supply 220V -240V -50H z Pow er C onsum ption 1.7 A m ps (M ax) O perating Tem perature 550°C [1022°F] (M ax) (500°C [932°F] recom m ended) M achine C ycle Tim es for splice sealing products 6 to 20 seconds depending on w ire size used on typical range of autom otive splices and the num ber or w ires used Total System Noise <80dB Dim ensions 390 x 36 5 x 225 m m [15 x 14 x 9 in] Weight 18 K g [40 lb] Product R ange R B K -ILS-125 P roducts Sizes 1 to 3A R B K -ILS-85 P roducts Sizes 6 /1 to 12/3 For O ther R aychem P roducts (eg R B K -V WS, R B K -ESS… .) C ontact TE

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 2Application Equipment M odel 10 5 Tabletop Tunnel Oven Product Facts I C losed-loop speed and tem perature control I C ontinuous controlled process I Adaptable for different I C E approved for w orldw ide use I Heater operation and over- tem perature alarm lights the heat zone. The upper chamber is equipped with adjustable heat shields to maximize the oven heating efficiency for various appli - cations. C ontrolled Heating Zone The Model 105 Tunnel Oven has two stamped foil heat - ing elements that are manu - factured to a strict wattage specification. Consistent temperatures (ambient to 700ºC) are controlled by a thermocouple embedded into the upper heating ele - ment connected to a closed-loop temperature controller. An alarm light illuminates whenever the actual heating element tem - perature varies from the set point temperature. C onveyor Speed C ontrol The conveyor speed is pre - cisely set by a 3-digit potentiometer. The SCR drive controller and DC drive motor ensure constant conveyor speed at any potentiometer setting from 100 to 999 [0.2 to 5.0 feet per minute], for precise heating of assemblies. M inim al Skill R equirem ents The open loading area of the entry section of the M105 requires that the operator simply place an assembly on the mesh con - veyor belt within the effec - tive width of the heat zone and collect it at the oppo - site end. Versatility The processor is designed to process a broad range of heat-shrinkable products up to 76.2 mm [3 in] in diame - ter and infinite length. The infrared energy source is well-suited to efficient pro - cessing of either single-wall is a reliable and versatile process heater which pro - vides a controlled process for a wide variety of heat- shrinkable products. The M105 is designed as an integrated modular unit. Assemblies are placed on the entry section of a mesh conveyor belt, transported through the heating chamber, across a bank of cooling fans then discharged from the rear of the conveyor. The M105 has two upper heating chamber height positions, 54 mm [2.11 in] and 98 mm [3.86 in].The posi tion is adjusted by removing the pivot pins and relocating them in the bear - ing stands. The upper chamber is cantilevered to permit pro - cessing of assemblies that require only a portion of the assembly to pass through Available in: Am ericas Europe Asia Pacific II I or adhesive-lined tubing. Heat output and drive speed can be con - trolled to accommodate a wide variety of products and substrates. Safety Features:

• Emergency Stop
• Automatic cool-down circuit to extend the life of the components
• Over-temperature switch that shuts off all power in the event of an overheat condition
• Lockout on temperature and speed controllers to prevent unauthorized changes
• Audible alarm indication of a heater failure
• Circuit breaker for current overload

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products M odel 10 5 (Continued) Electrical Pow er requirem ents 210-240 V A C , 20A , 1 ∅, 50/6 0 H z H eating elem ents (2) 1500 w att infrared stam ped foil w ith black quartz face, one top & bottom Drive system DC gear m otor w ith closed loop m otor controller, 3-digit thum bw heel A ir flow (cooling) 4 – 100 C FM fans, 2 - for upper heater housing, 2 – for product cooling O perating tem perature Set Point (H eater Surface) - A m bient to 7 00°C , Throughput = 50° to 200°C M echanical C onveyor belt system Wire m esh 7 0% open, w ith optional Teflon coating B elt Speed 6 .1 cm [0.2 ft] to 152 cm [5.0 ft] per m inute D im ensions cm [in] P rocessor dim ensions 99 cm [39 in] L x 6 8.5 cm [27 in] W x 41.7 cm [16 .5 in] H P rocessor w eight 6 8 K g [150 lb] C ontrol box w eight 7 .7 K g [17 lb] Shipping dim ensions 134.6 cm [53 in] L x 116 .8 cm [46 in] W x 6 3.5 cm [25 in] H Shipping w eight 146 K g [320 lbs] Tubing sizes Tubing diam eter (m ax) U p to 7 6 .2 m m [3.0 in] Tubing length (m ax) 356 m m [14 in] perpendicular to belt travel, unlim ited length parallel to belt travel Version D escription Part N o. M odel 105 Tunnel O ven C LTEQ -M 105-TU NNEL-O V EN 955018-000 Specifications and Dim ensions

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 2Application Equipment M odel 16B Tabletop B elt Heater Product Facts I C losed-loop speed and tem perature control I C ontinuous controlled process I Adaptable for different I Heater operation and over- tem perature alarm lights closed-loop temperature controller. An alarm light illuminates whenever the actual heating element tem - perature varies from the set point temperature. Speed C ontrol The belt speed is selected using a 3-digit thumbwheel via a closed-loop motor controller and DC gear motor. M inim al skill requirem ents There are clearly marked guides for aligning the assembly as well as the tubing or device being processed. The operator only has to center the assembly then the tubing and slide it into the belts. The belts grip and carry the assembly through the heat - ing and cooling zone, depositing them into the unloading bin. Labor costs are reduced significantly because once an operator loads an assembly, that operator can begin preparing another assembly. The throughput rate is usually limited by the rate at which the operator can load assemblies into the processor. Versatility The processor is designed to process a broad range of heat-shrinkable products up to 19 mm [0.75 in] in diam - eter and 90 mm [3.5 in] in length. The infrared energy source is well-suited to effi - cient processing of either single-wall or adhesive- lined tubing. Heat output can be controlled to accommodate a wide vari - ety of products and sub - strates. The Model 16B is our small - est (tabletop) conveyor type processor which provides a controlled process for a wide variety of heat-shrink - able tubing products. Double-sided timing belts on the top and bottom of the processing chamber draw the assemblies through a thermally controlled infrared heat zone and then through a fan-cooled cool - ing zone before depositing them into the unloading bin. C ontrolled Heating Zone The Model 16B processor has two stamped foil heat - ing elements that are manu - factured to a strict wattage specification. Consistent temperatures (ambient to 650º C) are controlled by a thermocouple embedded into the upper heating element connected to a Available in: Am ericas Europe Asia Pacific II Safety Features:

• Circuit breaker for current surges
• Pinch points protected by the housing
• Belts that do not pinch with significant force
• An over-temperature switch that kills power in the event of an overheat condition
• Automatic cool-down circuit to prevent heat damage to components

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products M odel 16B (Continued) Electrical Part N o. 8274 29-000 Part N o. 584 31 3-000, 04 71 4 3-000 Pow er R equirem ents 120 V A C , 1 ∅, 220 V A C , 1 ∅, 50/6 0 H z, 20 A 208-240 V A C , 15 A . H eating elem ents 2 ea. 1000 w att stam ped foil infrared w ith quartz face Drive system DC gear m otor w ith closed loop m otor controller, 3-digit thum bw heel A ir flow (cooling) 2 – 100 C FM fans in the upper heater housing M echanical C onveyor belt system Double sided tim ing belts; tw o on each side of the processor – pitch 9.5 m m [0.37 5 in] B elt Speed U p to 288 cm / m in [7 .5 ft / m in] D im ensions cm [in] P rocessor dim ensions 48 cm [19 in] W x 109 cm [43 in] L x 33 cm [13 in] H P rocessor w eight 41 K g [90 lbs] Shipping dim ensions 6 1 cm [24 in] W x 112 cm [43 in] L x 56 cm [22 in] H Shipping w eight 6 8 K g [150 lbs] Tubing sizes Tubing diam eter (m ax) U p to 19 m m [0.7 5 in] Tubing length (m ax) U p to 90 m m [3.5 in] Version D escription Part N o. M odel 16 B - 120 volt C LTEQ -M 16 B -120V -3WIR 827 429-000 M odel 16 B - 220 volt (4-w ire) C LTEQ -M 16 B -220V -4-WR 584313-000 M odel 16 B - 220 volt M od. C LTEQ -M 16 B -220V -3W-M 047 143-000 (3 w ire w ith Transform er) Specifications and Dim ensions

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 2Application Equipment M odel 19 B elt Heater for Heat- Shrinkable Tubing Products Product Facts I C losed-loop speed and tem perature control I C ontinuous controlled process I Adaptable for different I C E approved for w orldw ide use I Self-diagnostic circuitry I Parts counter and hour m eter C ontrol Heating Zone The Model 19 processor has two stamped foil heating elements that are manufac - tured to a strict wattage specification. Consistent temperatures (ambient to 700ºC) are con - trolled by a thermocouple embedded into the upper heating element connected to a closed loop tempera - ture controller. An alarm light illuminates whenever the actual heating element temperature varies from the set point temperature. Speed C ontrol The belt speed is selected using a 3-digit thumbwheel (on the front panel) via a closed loop motor controller and DC gear motor. M inim al Skill R equirem ents There are clearly marked guides for aligning the assemblies as well as the tubing or device being processed. The operator only has to center the assembly, then the tubing and slide it into the belts. The belts grip and carry the assemblies through the heating and cooling zones, depositing them into the unloading bin. Versatility The processor is designed to process a broad range of Raychem heat-shrinkable products up to 25 mm [1 in] in diameter and 178 mm [7 in] in length. The infrared energy source is well-suited to efficient processing of either single wall or adhe - sive-lined type processor is a reliable and versatile process heater which provides a controlled process for a wide variety of heat-shrink - able products. Double-sided timing belts on either side of the upper and lower heating cham - bers draw the assemblies through a thermally con - trolled infrared heat zone, then through a fan-cooled zone before depositing them into the unloading bin. The processor was designed to meet the requirements of the European Safety Directives and is CE approved, allowing for worldwide use. Available in: Am ericas Europe Asia Pacific II I tubing. Temperature and speed can be controlled to accommodate a wide variety of products and substrates. Safety Features:

• Emergency Stop
• Automatic cool-down circuit to extend the life of the components
• Over-temperature switch that shuts off all power in the event of an overheat condition
• Lockout on temperature and speed controllers to prevent unauthorized changes

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products M odel 19 (Continued) Electrical Pow er requirem ents 210-240 V A C , 20A , 1 ∅, 50/6 0 H z H eating elem ents 2 X Standard = 1580W, Wide = 16 6 0W, Narrow = 880W Drive system DC gear m otor w ith closed loop m otor controller; 3-digit thum bw heel A ir flow (cooling) 2 – 100 C FM fans in the upper heater housing O perating tem perature Set Point (H eater Surface) - A m bient to 7 00°C , Through-put = 50° to 200°C M echanical C onveyor belt system Double sided tim ing belts; tw o on each side of the processor – pitch 9.5 m m [0.37 5 in] B elt Speed U p to 152 cm / m in [5.0 ft / m in] D im ensions cm [in] P rocessor dim ensions 53 cm [21 in] W x 135 cm [53 in] L x 45 cm [18 in] H Shipping dim ensions 6 6 cm [26 in] W x 147 cm [58 in] L x 58 cm [23 in] H P rocessor w eight 56 K g [120 lbs] Shipping w eight 86 K g [190 lbs] Tubing sizes Tubing diam eter (m ax) U p to 2.5 cm [1.0 in] Tubing length (m ax) U p to 12.7 cm [4.0 in] Standard or 17 8 m m [7 .0 in] w ith M odel 19 - Wide Version D escription Part N o. M odel 19 - Standard (3.7 5 in. Elem ents) C LTEQ -M 19-B ELT -H TR 7 14529-000 M odel 19 - Wide (6 in. Elem ents) C LTEQ -M 19-B ELT -H TR -6 IN 07 5135-000 M odel 19 - Narrow (1.5 in. Elem ents) C LTEQ -M 19-B ELTH TR -SS D43037 -000 O ptional Attachm ents Floor Stand w ith w heels IR -1900-FLO O R -STA ND 8896 6 4-000 Specifications and Dim ensions

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 2Application Equipment M odel 2 0 B elt Heater for Heat- Shrinkable Tubing Products Product Facts I C losed-loop speed and tem perature control I C ontinuous controlled process I Adaptable for different I C E approved for w orldw ide use I Heater operation and over- tem perature alarm lights into the upper heating element connected to a closed loop temperature controller. An alarm light illuminates whenever the actual heating element temperature varies from the set point temperature. Speed C ontrol The belt speed is selected using a 3-digit thumbwheel (on the front panel) via a closed-loop motor controller and DC gear motor. M inim al Skill R equirem ents There are clearly marked guides for aligning the assemblies as well as the tubing or device being processed. The operator only has to center the sub - strate, then align the tubing and slide the assembly into the belts. The belts grip and carry the assemblies through the heating and cooling zones, depositing them into the unloading bin. Versatility The processor is designed to process a broad range of Raychem heat-shrinkable products up to 25 mm [1 in] in diameter and 127 mm [4 in] in length. The infrared energy source is well-suited to efficient processing of either single wall or adhe - sive-lined tubing. T emperature and speed can be con - trolled to accommodate a wide variety of products and substrates. Safety Features:

• Emergency Stop
• Automatic cool-down cir - cuit to extend the life of the components

type processor is a reliable and versatile process heater, which provides a controlled process for a wide variety of heat-shrink - able products. Double-sided timing belts on either side of the upper and lower heating cham - bers draw the assemblies through a thermally con - trolled infrared heat zone, then through a fan-cooled zone before depositing them into the unloading bin. C ontrolled Heating Zone The Model 20 processor has two stamped foil heat - ing elements that are manu - factured to a strict wattage specification. Consistent temperatures (ambient to 700ºC) are controlled by a thermocouple embedded

• Over-temperature switch that shuts off all power in the event of an overheat condition
• Lockout on temperature and speed controllers to prevent unauthorized changes New Features
• Self-locking support post in the upper heating chamber for servicing, maintenance and emer - gency cool down
• Reversing motor relay which runs the timing belts in reverse until the Set Point temperature has been reached, preventing the operator from loading assemblies into the machine
• Hinged lower side panels for access to compo - nents, making routine service and maintenance much easier Available in: Am ericas Europe Asia Pacific II

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products M odel 2 0 (Continued) Electrical Pow er requirem ents 210-240 V A C , 20A , 1 ∅, 50/6 0 H z H eating elem ents 2 X Standard = 1580W, Wide = 16 6 0W, Narrow = 880W Drive system DC gear m otor w ith closed loop m otor controller; 3-digit thum bw heel A ir flow (cooling) 2 – 100 C FM fans in the upper heater housing O perating tem perature Set Point (H eater Surface) - A m bient to 7 00°C , Through-put = 50° to 200°C M echanical C onveyor belt system Double sided tim ing belts; tw o on each side of the processor – pitch 9.5 m m [0.37 5 in] B elt Speed U p to 152 cm / m in [5.0 ft / m in] D im ensions cm [in] P rocessor dim ensions 53 cm [21 in] W x 135 cm [53 in] L x 45 cm [18 in] H Shipping dim ensions 6 6 cm [26 in] W x 147 cm [58 in] L x 58 cm [23 in] H P rocessor w eight 56 K g [120 lbs] Shipping w eight 86 K g [190 lbs] Tubing sizes Tubing diam eter (m ax.) U p to 25 m m [1.0 in] Tubing length (m ax.) U p to 104 m m [4.0 in] stand Version D escription Part N o. M odel 20 - Standard (3.7 5 in. Elem ents) M O DEL20C E-B ELT -H EA TER C B 8546 -000 O ptional Attachm ents Floor Stand w ith w heels IR -1900-FLO O R -STA ND 8896 6 4-000 Specifications and Dim ensions

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 2Application Equipment VB H-1 Versatile B ed Heater for L arge Assem blies and Substrates Product Facts The Versatile B ed Heater (VB H-1) is the latest generation of reliable and versatile process heaters. I C losed-loop speed and tem perature control I C ontrolled process I Adaptable for a large variety long length and heat sensitive applications I Heater operation and over- tem perature alarm lights I Heater and track are sold seperately. See available track lengths on page 2 -2 4. Speed C ontrol The belt speed is selected using a 3-digit thumbwheel (on the front panel) via a closed-loop motor controller and DC gear motor. C ontrolled Heating Zone The VBH-1 processor has two stamped foil heating elements that are manufac - tured to a strict size and wattage specification. Consistent temperatures (ambient to 650ºC) are con - trolled by a thermocouple embedded into the upper heating element connected to a closed loop tempera - ture controller. An alarm light illuminates whenever the actual heating element temperature varies from the set point temperature. M inim al Skill R equirem ents The open loading area of the holding fixtures on the VBH-1 requires that the operator simply place the assembly on the holding fixtures within the effective width of the heat zone. The assemblies can be removed once the heater transporter has passed over the assem - blies and has come to a complete stop in either the right or left parking stations. Versatility The traveling heater is designed to process a broad range of heat-shrink - able products up to 127 mm [5 in] in diameter and infinite length. The infrared energy source is well-suited for efficient processing of either single- wall or adhesive-lined tubing. Heat output and drive speed can be controlled to accom - modate a wide variety of products and substrates. The VBH-1 is an integrated modular unit consisting of an upper and lower heater chamber with a transporter base and motorized wheels that are directed through an aluminum track. The heater transporter automatically stops when it reaches the parking station at either end of the process area. It has been designed to accommodate a large vari - ety of difficult to process applications. With an adjustable upper heating chamber the heater separa - tion can be adjusted from 37 mm [1.5 in] to a 150 mm [6 in] gap enabling the unit to process heat-shrinkable tubing products up to 127 mm [5 in} in diameter. The upper and lower chambers are provided with adjustable heat shields to maximize the oven heating efficiency. Available in: Am ericas Europe Asia Pacific II Safety Features

• Emergency Stop
• Automatic cool-down circuit to extend the life of the components
• Over-temperature switch that shuts off all power in the event of an overheat condition
• Lockout on temperature and speed controllers to prevent unauthorized changes
• Safety guards to protect operator from moving parts and hot surfaces

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products VB H-1 (Continued) Electrical Pow er R equirem ents 208/240 V A C , 1 ∅, 50/6 0 H z, 20 A H eating elem ents 2 X From 6 00 to16 00 w att infrared stam ped foil w ith quartz face Drive system 1/12 hp DC m otor w ith SC R Drive controller w ith a 3 digit speed potentiom eter A ir flow (C ooling) 2 X 100 C FM fans in the upper heater housing / control box and 1 in low er cham ber O perating tem perature Set Point (H eater Surface) - A m bient to 6 50°C , Through-put = 50° to 250°C M echanical M oving oven speed 12.7 cm [0.50 ft] to 254 cm [10.0 ft] / M inute H eater separation A djustable from 37 m m [1.5 in] to 150 m m [6 In] U pper Position Effective heating length 355 m m [14 in] Effective heating w idth 254 m m [10 in] D im ensions cm [in] C ontrol box dim ensions 407 m m [16 in] L x 305 m m [15 in] W x 125 m m [5 in] H H eating C ham ber dim ensions 457 m m [18 in] L x 407 m m [16 in] W x 533 m m [21 in] H – Full extension H eating System w eight 30 K g [6 6 lb] Tubing sizes Tubing diam eter U p to 127 m m [5 in] Tubing length 255 m m [10 in] perpendicular to heater travel, unlim ited length parallel to heater H eating unit D escription Part N o. V B H -1 B ed H eater V B H -1-B ED-H TR -220V -3WR C J1047 -000 Track D escription Part N o. 10 ft. A lum inum Track V B H -1-B ED-H TR -TR A C K -10FT C J1494-000 15 ft. A lum inum Track V B H -1-B ED-H TR -TR A C K -15FT C M 6 819-000 Specifications and Dim ensions