026 CTS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • RoHS compliant Special: Consult CTS Water splash proof construction available Operating Temperature -30°C to +85°C 5 watts @25°C, 4 watts @ 55°C, derated to no load at 105°C, linear taper (Derating required on two section countols.) Series 026 1 - 4 © 2006 CTS Corporation. All rights reserved. Information subject to change. 10/15/06 CTS Electronic Components www.ctscorp.com Rotational Torque: Standard: 3/4 to 6 in. oz (54 - 432 gf-cm) Special: higher torque models available, consult CTS

DIMENSION: mm inch Standard: .438" (11.1mm) Special: .531" (13.5mm) available Special Features and Constructions Terminals accepting push-on connectors available. Straight or concentric tandem constructions. Can be combined with 450 series, 15/16" (24mm) diameter, to make any combination of straight or concentric tandem constructions with or without switch. T026 Metal Shaft, Bushing Mounting, Type "T" Solder Lug Terminals X026 / Y026 Metal Shaft, Bushing Mounting, Printed Circuit Type X/Y Terminals DIMENSION: mm inch Shaft Center to Lug .437 11.1 22.2 TERMINAL (3) HOLES Ø2.18 /.086 "A" ±.016 ±.031"L" ±0.8 .875 .469 11.9 MTG. SURFACE 3/8-32 UNEF-2A ±0.4 .125 3.18 ±.003 ±.003 .062±.003 .082±.003 2.08±0.08 1.57±0.08 .062±.003 1.57±0.08 CLEARANCE HOLE .XAM 8.91 087. .410 10.41 ±0.08 .410 10.41 ±0.08 .164±.003 4.16±0.08 4.0 ±.031 "L"±0.8 .156 .312 7.92 TYP. 739. 8.32Ø MTG. SURFACE 3/8-32NEF-2A .437 .125 3.18 11.1 .867Y= 4.9 .191 TYP. .312 7.92 3.68.082±.002 (6) HLS. Ø2.08±0.05 X=17.5 22.0 .687 2.03±0.05 .080±.002 MTG. SURFACE REF. .145 Shaft Information Available for round, flatted, knurled, or slot metal shaft Diameter: 6.35mm (.250") Consult CTS for custom-made metal and economic plastic shaft Mounting Information Bushing Mount Consult CTS for custom-made metal and economic plastic bushing Diameter: EIA standard 3/8-32 UNEF-2A thread Standard length: 9.53mm (.375") or 6.35mm (.250") Twisted Tab Mounting Available Locating Lugs Standard: Left lug with terminals facing inward Available: No lug, right lug or two lugs with terminals facing inward MAX. "A" ±.016 ±0.4 8.32Ø 739. 2 - 4 © 2006 CTS Corporation. All rights reserved. Information subject to change. 10/15/06 CTS Electronic Components www.ctscorp.com MOUNTING HOLE DETAIL MOUNTING HOLE DETAIL WIPER 1 3 CLOCKWISE CIRCUIT CCW CW WIPER 1 3 CLOCKWISE CIRCUIT CCW CW 1 2 3 Long life constructions available. Long Life Construction This construction provides an extended life of 50K and 100K cycles. Consult CTS for details.

DIMENSION: mm inch 8.32Ø 739. MTG. SURFACE 1 Ø2.54(2) 7.87 14.83 CLEARANCE HOLE (3) (2)(2) (2) .469 11.9 3/8-32 UNEF-2A "A" ±.016 ±0.4 ±.031"L" ±0.8 .437 11.1 22.2 .875 .125 3.18 MAX. .164±.003 4.16±0.08 .062±.003 1.57±0.08 ±.003 .410 10.41 ±0.08 .58 .31 U026 Metal Shaft, Bushing Mounting, Printed Circuit Type “U” Formed Terminals ±.003 .410 10.41 ±0.08 ±.003 ±.003 .062±.003 .082±.003 2.08±0.08 1.57±0.08 .062±.003 1.57±0.08 CLEARANCE HOLE .410 10.41 ±0.08 .410 10.41 ±0.08 .164±.003 4.16±0.08 .437 11.1 22.2 .875 .469 11.9 3/8-32 UNEF-2A .125 3.18 .XAM 8.91 087. MAX. MTG. SURFACE REF. 34.5 8.32Ø 739. 1.36 "A" ±.016 ±0.4 ±.031"L" ±0.8 DIMENSION: V026 Metal Shaft, Bushing Mounting, Printed Circuit Type “V” Formed Terminals MTG. SURFACE "A" "L" 1 3 22.2 .875 MAX. .437 11.1 .125 3.18 .469 11.9 3/8-32 UNEF-2A 8.32Ø 739. ±.016 ±0.4 ±.031 ±0.8 ±.003 .410 10.41 ±0.08 ±.003 ±.003 .062±.003 .082±.003 2.08±0.08 1.57±0.08 .062±.003 1.57±0.08 CLEARANCE HOLE .410 10.41 ±0.08 .410 10.41 ±0.08 .164±.003 4.16±0.08 DIMENSION: mm inch S026 Metal Shaft, Bushing Mounting, Faston Type “S” Formed Terminals .080±.002 .031±.002 7.92(2)±0.05 2.03±0.05 MOUNTING HOLE DETAIL PCB LAYOUT .082±.002 Ø2.08±0.05 mm inch 3 - 4 © 2006 CTS Corporation. All rights reserved. Information subject to change. 10/15/06 CTS Electronic Components www.ctscorp.com MOUNTING HOLE DETAIL MOUNTING HOLE DETAIL WIPER 1 3 CLOCKWISE CIRCUIT CCW CW WIPER 1 3 CLOCKWISE CIRCUIT CCW CW WIPER 1 3 CLOCKWISE CIRCUIT CCW CW 8.0 .315

A - ±10% B - ±20% METAL MOUNTING BUSHING LENGTH: 1/8" INCREMENTS EXAMPLES: 2 - .250"(6.35mm) 3 - .375"(9.53mm) 8 - 1.000"(25.4mm) 1 - TWIST TAB MOUNT A - .250"(6.35mm) DIECAST B - .375"(9.53mm) DIECAST METAL SHAFT LENGTH “L” FROM MOUNTING SURFACE 1/32"INCREMENTS EXAMPLES: 20 - .625"(6.35mm) 24 - .750"(19.5mm) 28 - .875"(22.2mm) TERMINAL STYLE T - SOLDER LUG X - PC .687”(17.5mm) U - FORMED TO FRONT V - FORMED TO REAR

Ordering Information

026 T 2 20 R 103 B 1 A 1

F - FLATTED .375"X.156" (9.53mmX4.0mm) K - KNURLED S - SD SLOT .063" DEEP X.047" WIDE (1.6mmX1.2mm) TAPER 1 - LINEAR 2 - 20%AUD 3 - 20%CCW AUD SPECIALS 2 - LOCATING LUG RIGHT SIDE 3 - NO LOCATING LUG RESISTANCE CODE EXAMPLES CODE RESISTANCE 501 500 OHMS 102 1K 252 2.5K 502 5K 103 10K 253 25K SWITCHES FUNCTION CTS TYPE CURRENT RATING A - NONE B - SPST ROTARY TGC 6AMP@125VAC C - DPST ROTARY 027 3AMP@125VAC D - SPDT ROTARY 028 3AMP@125VAC E - SPST PULL-PUSH FR-K 3AMP@125VAC F - SPST ROTARY FR-GC 3AMP@125VAC 5A0 5 OHMS 1 - LOCATING LUG LEFT SIDE 5 - LOCATING LUG BOTH SIDE D - ±5% 1AMP@250VAC 1AMP@250VAC/DC .080±.002 .031±.002 7.92(2)±0.05 2.03±0.05 .875 22.2 MTG. SURFACE 11.9 853.1 5.43 8.32Ø 739. .FER ±.031 ±0.8 .469 CENT. .156 3.96 CENT..328 8.33 .832 21.1MIN. .925 23.5MAX. MOUNTING HOLE DETAIL .062 1.57 PCB LAYOUT .082±.002 Ø2.08±0.05 10.411.57 .062 10.41 .410.410 4.17 CLEARANCE HOLE .164 VPE026 Metal Shaft, Twist TAB Mounting, Type “V” Formed Terminals DIMENSION: mm inch Y - PC .867”(22.0mm) * CONSULT CTS FOR DETAILS MAX CENT STYLE “A” EIA S148 24 TEETH “L” S - FASTON * CONSULT CTS FOR SPECIAL REQUIREMENTS 4 - 4 © 2006 CTS Corporation. All rights reserved. Information subject to change. 10/15/06 CTS Electronic Components www.ctscorp.com 23.0 MTG. SURFACE TERMINAL HOLES Ø2.18/.086 (P)(R) DIMENSION: mm inch .437 11.1 22.2 ±.031"L" ±0.8 .875 .125 3.18 ±.003 ±.003 .062±.003 .082±.003 2.08±0.08 1.57±0.08 .062±.003 1.57±0.08 CLEARANCE HOLE XAM 8.91 087. .410 10.41 ±0.08 .410 10.41 ±0.08 .164±.003 4.16±0.08 MAX. MOUNTING HOLE DETAIL 8.32 739. "A" ±.016 ±0.4 3/8-32 UNEF-2 .906 T2-026 Dual-section, Metal Shaft, Bushing Mounting, Type “T” Solder Lug Terminals * More multi-section models available, consult CTS for details WIPER 1 3 CLOCKWISE CIRCUIT CCW CW WIPER WIPER 1 3 CLOCKWISE CIRCUIT CCW CW * Consult CTS for details