02090.25MXP LITTELFUSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Electrical Characteristics for Series t *OBDDPSEBODF with Underwriter’s Laboratories Standard UL 248-14 t 'VTFTBSF boardwashable in most solvents t "WBJMBCMFJODBSUSJEHF and axial lead form and with various forming dimensions t 3P)4DPNQMJBOUBOE Lead-free
Applications
% of Ampere Rating Opening Time 100% 4 Hours, Min. 135% 1 Hour, Max. 200% 3 Sec. Min. ; 20 Sec. Max. Amp Code Ampere Rating (A) Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Agency Approvals PS E .250 0.25 350 100A @ 350Vac 2.410 0.216 x x .375 0.375 350 1 .170 0.580 x x .500 0.5 350 0.688 1 .160 x x .600 0.6 350 0.477 1 .750 x x .750 0.75 350 0.340 2.950 x x .800 0.8 350 0.304 3.450 x x 001 . 1 350 0.210 5.640 x x x Electrical Characteristic Specifications by Item t&MFDUSPOJD-JHIUJOH#BMMBTUT PS E
Description
Revised: January 7, 2009 Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology 252 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses "(5JNF-BH4FSJFT
209 Series
Please refer to www.littelfuse.com/series/209.html for current information. Average Time Current Curves Soldering Parameters - Wave Soldering T emperature Rerating Curve 1000 100 0.1 0.01 0.1 1 10 100 1000 .250A .375A .500A .750A 1.00A TIME IN SECONDS CURRENT IN AMPERES Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: 150° C Preheat Time: 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters: Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time
Revised: January 7, 2009 253© 2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses "(5JNF-BH4FSJFT Please refer to www.littelfuse.com/series/209.html for current information. Body : Glass Cap : Nickel–plated brass Leads: Tin–plated Copper T erminal Strength MIL -STD-202G, Method 211A, Test Condition A Solderability Reference IEC 60127 Second Edition 2003-01 Annex A Product Marking Cap1 : Brand logo, current and voltage ratings Cap2 : Series and agency approval marks Operating Temperature: –55ºC to 125ºC. Thermal Shock: MIL -STD-202G, Method 107G, Test Condition B (5 Cycles -65ºC to +125ºC). Vibration MIL -STD-202G, Method 201A Humidity MIL -STD-202G, Method 103B, Test Condition A: High RH (95%) and elevated temp (40ºC) for 240 hours Salt Spray MIL -STD-202G, Method 101D, Test Condition B Packaging 209 000P Series 209 000EP Series 4.5 (.177") 14.48 (.57") 14.48 (.57") 4.7 (.184") .635 (.025") 38.1 (1.50") TYP. Part Numbering System Option Codes Packaging Code Quantity Code Current Rating Code Series Blank = Cartridge Type Fuse E = Axial Leaded Fuse X = Loose Pack M = 1000 Refer to Amp Code column of Electrical Characteristics Table
0209 M X E Pxxxx
Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width Reel and Tape EIA 296-E 1500 DRT1 T1=52mm (2.062”)
Revised: January 7, 2009 Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology 254 © 2009 Littelfuse, Inc. Specifications are subject to change without notice.