02080.125MXP LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Electrical Characteristics for Series t *OBDDPSEBODF with Underwriter’s Laboratories Standard UL 248-14 t 'VTFTBSF boardwashable in most solvents t "WBJMBCMFJODBSUSJEHF and axial lead form and with various lead forming dimensions t 3P)4DPNQMJBOUBOE Lead-free

Applications

% of Ampere Rating Opening Time 100% )PVST Min. 135% )PVS Max. 200% 1 Second, Max. Amp Code Amp Rating Voltage Rating Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Agency Approvals PS E .125 0.125 350 100A @ 350V AC 3.900 0.00286 x x .250 0.250 350 1 .150 0.0300 x x .375 0.375 350 0.395 0.171 x x .500 0.500 350 0.265 0.365 x x .750 0.750 350 0.152 1 .050 x x 001 . 1 .0 350 0.103 2.220 x x x 01 .5 1 .5 350 0.0712 0.800 x x x 002. 2.0 350 0.0497 1 .50 x x x 02.5 2.5 350 0.0372 2.68 x x x 003. 3.0 350 0.0317 4.62 x x x 03.5 3.5 350 0.0265 6.70 x x x 004. 4 350 0.0240 9.40 x x x 005. 5 350 0.0186 17 .00 x x x 006. 6 350 0.0154 22.10 x x x 007 . 7 350 0.0130 40 x x x 008. 8 350 0.0107 56 x x x 010. 10 350 0.0075 116 x x x Electrical Characteristic Specifications by Item t&MFDUSJDBMCBMMBTUTVTFEJOýVPSFTDFOUMJHIUJOHBOEPUIFS E

Description

Revised: April 15, 2009 Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology 248 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 2AG > Fast-Acting > 208 Series

208 Series

Please refer to www.littelfuse.com/series/208.html for current information. Average Time Current Curves 100 0.1 0.01 0.001 0.1 1 10 100 100 0 1/8A 1/10A 1/4A 3/8A 1/2A 3/4A 1 1/2A 2 1/2A 10A TIME IN SECONDS CURRENT IN AMPERES Soldering Parameters - Wave Soldering T emperature Rerating Curve Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) 5ZQJDBM*OEVTUSZ3FDPNNFOEBUJPO Temperature Minimum: 100° C Temperature Maximum: 150° C Preheat Time: 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: 4PMEFS*SPO5FNQFSBUVSF¡$ )FBUJOH5JNFTFDPOETNBY Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters:

Revised: April 15, 2009 249© 2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 2AG > Fast-Acting > 208 Series Please refer to www.littelfuse.com/series/208.html for current information. Body : Glass Cap : Nickel–plated brass Leads: Tin–plated Copper T erminal Strength .*-45%( .FUIPE" Test Condition A Solderability 3FGFSFODF*&$4FDPOE&EJUJPO 2003-01 Annex A Product Marking Cap1 : Brand logo, current and voltage ratings Cap2 : Series and agency approval marks Operating Temperature: –55ºC to 125ºC. Thermal Shock: .*-45%( .FUIPE( 5FTU$POEJUJPO# $ZDMFT$UP Vibration .*-45%( .FUIPE" Humidity .*-45%( .FUIPE# 5FTU$POEJUJPO ")JHI3) BOEFMFWBUFEUFNQ $ for 240 hours Salt Spray .*-45%( .FUIPE% 5FTU$POEJUJPO# Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width 3FFMBOE5BQF &*"& 1500 %35 T1=52mm (2.062”) Packaging 208 000P Series 208 000EP Series 4.5 (.177") 14.48 (.57") 14.48 (.57") 4.7 (.184") .635 (.025") 38.1 (1.50") TYP. Part Numbering System

0208 M X E Pxxxx

Blank = Cartridge Type Fuse E = Axial Leaded Fuse X = Loose Pack M = 1000 Refer to Amp Code column of Electrical Characteristics Table

Revised: April 15, 2009 Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology 250 © 2009 Littelfuse, Inc. Specifications are subject to change without notice.