020587-000 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
“ue FOUR CONDUCTOR CABLE, SHIELDED, JACKETED, GENERAL PURPOSE, 600 VOLT at 28-Mar-11 This specification sheet forms a part of the latest issue of Raychem Specification 55A. COMPONENT WIRES - 55A0111 SHIELD - TIN-COATED COPPER JACKET - RADIATION-CROSSLINKED, \\ MODIFIED ETFE RISES) A re SES ke SIs ¥ > SS) CABLE CONSTRUCTION DETAILS. CONDUCTOR SHIELD JACKET THICKNESS OUTSIDE DIAMETER MAXIMUM v (AWG) (AWG) (Ib/1000 ft) MINIMUM | NOMINAL | NOMINAL | MAXIMUM 56A1141-30-* [30a 006 ce cog tog 7 seAiia4i-2e-* [esa cos coe cogent s5A1141-26-" [26 sa 006 coos tio tar 2 SeAIIat-24-* [aga 006 008 23a sa seAtiai-22-* [22a oo oo tz ts 97 S5A1141-20-* [20 sa 006 08 sa io 27.0 ssAliaiie* [is Tosco Tie T2087 seAriaiie* [ie Ta coe Toot 2 ae SeAriati4s [igs 007 009 2a eect SBAIaI2* Tee 007 009 ea 3496 ssariaito* [io sa oo cot a7 sont CABLE RATINGS AND ADDITIONAL REQUIREMENTS. TEMPERATURE RATING: 150°C LIFE CYCLE: 200 + 3°C for 168 hours Maximum continuous conductor temperature LOW TEMPERATURE-COLD BEND: -65 + 2°C for 4 hours VOLTAGE RATING: 600 volts (rms) at sea level SHIELD COVERAGE: 85% (minimum) ACCELERATED AGING: 300 + 3°C for 7 hours VOLTAGE WITHSTAND TEST (Post Environmental): BLOCKING: 200 + 3°C for 6 hours 1000 volts (rms), 60 Hz, 1 minute DIELECTRIC WITHSTAND: 1500 volts (rms), 60 Hz FLAMMABILITY: Procedure 1, 3 seconds (maximum); 3 inches (maximum); PART NUMBER: no flaming of facial tissue The "*" in the part numbers above shall be replaced by color JACKET COLOR: White preferred code designators with a slash separating the component JACKET ELONGATION AND TENSILE STRENGTH wire colors and a dash separating the component wire colors Elongation, 50% (minimum) from the jacket color. Tensile Strength, 5000 Ibf/in? (minimum) 4/ Example: AWG 22, black, brown, red and orange JACKET FLAWS: component wires; white jacket: Spark Test, 1000 volts (rms) 55A1141-22-0/1/2/3-9 Impulse Dielectric Test, 6.0 kV (peak) NOTE: Nominal values are for information only. Nominal values are not requirements. ‘Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. TE Connectivity aiso reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. "/ COLORS AND GOLOR GODE DESIGNATORS SHALL BE IN AOOORDANOE WITH MILSTO-581_ HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYOHEM PART NUMBER AN ALTESNATNE COLOR GODE MAY REPLACE MIL-STO.G0i COLOR CODE DESIGNATORS. (EXAMPLE "201/902." MAY BE REPLAGED BY ‘Wnox') OTHER CODES AND) SUSFKES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY. TO CAPTURE ANY ADDITIONAL REOU REMENTS IMPOSED BY THE PURCHASE ORDER Page 1 of 1 Redwood City, CA 94063-3800 AEFERENGED DOOUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID Y Fax ce0'se) 6297