02-05-000-1511 HARTING | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
DIN-Signal harbus64,C,F,PL1-5000 reel DIN-Signal harbus64,C,F,PL1-5000 reel Image is for illustration purposes only. Please refer to product description. Part number 02 05 000 1511 Specification DIN-Signal harbus64,C,F,PL1-5000 reel HARTING eCatalogue https://b2b.harting.com/02050001511 Identification Category Contacts Series har-bus® 64 Type of contact Crimp contact Features lead-free Version Gender Female contact Manufacturing process Stamped contacts Pack contents 5000 bandoliered contacts Technical characteristics Conductor cross-section AWG 28 ... AWG 20 Operating current ≤1.5 A Contact resistance ≤20 mΩ Stripping length 3.5 ... 4 mm Performance level 1 Mating cycles ≥500 Material properties Material (contacts) Copper alloy Page 1 / 3 | Creation date 2021-07-20 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality, conformity with applicable laws and directives, as well as for the electrical safety in the particular application. HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com
DIN-Signal harbus64,C,F,PL1-5000 reel Material properties Surface (contacts) Noble metal over Ni Mating side Ni Termination side RoHS compliant ELV status compliant China RoHS e REACH Annex XVII substances No REACH ANNEX XIV substances No REACH SVHC substances No Specifications and approvals Specifications IEC 61076-4-113 (complementary) Commercial data Packaging size 1 Net weight 1,200 g Country of origin Germany European customs tariff number 85366990 eCl@ss 27440204 Contact for industrial connectors Current carrying capacity The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non- intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques acc. to IEC 60512-5-2 Operating current (A) Ambient temperature (°C) Page 2 / 3 | Creation date 2021-07-20 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality, conformity with applicable laws and directives, as well as for the electrical safety in the particular application. HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com
DIN-Signal harbus64,C,F,PL1-5000 reel Installation of crimp contacts Fitting the crimp contacts: After crimping the wires onto the contacts with the help of a crimping tool or an automatic crimping machine the contacts should be correctly oriented and inserted into the cavities of the connector moulding in the required configuration. They snap into position and are firmly held in place. A light pull on the wire assures the correct tensile strength of the contact. When using stranded wires with a gauge below 0.37 mm2 an insertion tool is necessary.Insertion tool part number: 09 99 000 0100 Insertion tool part number: 09 99 000 0100 Removing the crimp contacts: The removal tool is inserted into a slot on the side of the respective crimp cavity. This action compresses the contact retaining spring therefore the contact can then be easily withdrawn using a light pull on the wire. This action will cause no damange to the contact / wire which can be repositioned / refitted as necessary. The drawing demonstrates the crimp removal procedure (max. 5x). Removal tool part number: 09 99 000 0101 Page 3 / 3 | Creation date 2021-07-20 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality, conformity with applicable laws and directives, as well as for the electrical safety in the particular application. HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com