018-0001 MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Features

  • Protects electronics from moisture and static damage
  • Opaque and light tight ensuring the inside item can not been seen from outside
  • Firm lamination and hot sealing offers superior resistance of vapour and oxygen
  • Surface resistance of 108~1011Ω
  • Customized printing is available
  • These bags are ideal for transporting and storing sensitive devices such as circuit boards and electronic components.
  • Available in 3.6 / 4.4 and 6Mil thicknesses
  • Flexible structure & easy to vacuum seal Standard Construction Our moisture barrier bags are constructed in 3 layers. The bag features an anti static metallized polyester outer layer and an anti static inner layer. In between are layers of polyethylene, nylon and an aluminium foil shield. Configuration(s): Our bags are available in custom sizes or in several industry standard sizes. Bags are offered in a 3-seal configuration, with our standard flexographically printed artwork. Our bags can also be personalised with your company logo on any bespoke orders. Standard Bag Artwork: Our moisture barrier bags are produced with the following sample artwork as standard. For further information on bespoke/ printed orders, please contact one of our sales team. Please note there is a MOQ of 20,000 bags on all printed bags. Note: All of our moisture barrier bags are batch coded for QC traceability. Test Conditions The following results were taken under the following environmental test conditions: Temperature: 22°C / Humidity: 46% Item: Test Standard: Result: Film Composition N/A PET-AL/NY/CPE Metal Layer Resistance ASTMD-257 <0.1Ω Inner and Outer Resistance ASTMD-257 108Ω - 1011Ω Static Shielding - Capacitance Probe EIA541 (Voltage Difference) <10V Moisture Vapour Transmission (at 90% RH, 23°C) ASTMF1249-2005 0.02 gm/100sq.in/24hrs Tensile Strength ASTM D882 MD/TD >24lbs/in

Page <2> V1.014/07/22 Moisture Barrier Bag Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Part Number Table Description Part Number Moisture Barrier Bag 3.6Mil / 92 microns, 152.4mm×711.2mm, PK100 018-0001 Test Conclusion: The anti-static moisture barrier bag is tested accordant with the relevant test standard and requirements. Test Item: Test Method: Measured Equipment(s): MDL: Lead (Pb) IEC 62321:2008 Ed.1 Sec.8 ICP-OES 2mg/kg Cadmium (Cd) IEC 62321:2008 Ed.1 Sec.8 ICP-OES 2mg/kg Mercury (Hg) IEC 62321:2008 Ed.1 Sec.7 ICP-OES 2mg/kg Hexavalent Chromium (Cr(VI)) IEC 62321:2008 Ed.1 Annex C UV-Vis 2mg/kg Polybrominated Biphenyls (PBBs) IEC 62321:2008 Ed.1 Annex A GC-MS 5mg/kg Polybrominated Diphenyl Ethers (PBDEs) IEC 62321:2008 Ed.1 Annex A GC-MS 5mg/kg EMI Shielding: Meets required range of EN 61340-5-1 tested per IEC 61340-2-3 and ANSI/ESD STM11.31 Item: Test Standard: Result: Puncture Resistance ASTM F1306-90(2002) Inner to Outer: 54.7N Outer to Inner: 51.3N Tear Strength ASTM D1004 MD >3lbs/in TD >3.8lbs/in Heat Seal Temperature - 250-375 F Heat Seal Time - 0.5-3.5 sec Heat Seal Pressure - 30-70 PSI Seal Strength GB/96-04-10 >3kg/cm Contact Corrosivity FTMS 101C Method 3005 No visible spots detected Static Decay Time IEC61340-5-1 (±1000 - ±100V) ≤2S