01694 EKTOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Professional Emergency Luminaire Non-maintained operation Soft-start charger to reduce building load Lowest energy consumption (avg. <0.25W) Selectable discharge rating for hazardous areas Fast emergency switch-over (<0.5s) for high-task areas Long life electronics 12 years design life at max. ambient High Quality Lithium battery (LiFePO4) and smart charger Standalone (SPU) Self test (AS2293/ IEC62034) DALI (IEC62386) Ektor wired monitored system
ORDERING INFORMATION
Description Ledfire Pro Emergency Luminaire - D80 Driver Type DALI DT1 Emergency Item Code EV-LEDFIRE-PRO MECHANICAL Body Material Polycarbonate Fitting Colour White Installation Type Recessed IP Rating IP44 Front Face Only ELECTRICAL Electrical Rating Class II Input Frequency 50 Hz Input voltage 230Vac In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% Maximum Wattage 2.5 W Standby Power 0.25 W Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge. Working Temp Range 0 to 40 °C DRIVER Dimmable No Driver Included Yes Driver Type DALI DT1 Emergency Flex & Plug or Lead Length 1200 mm Wiring Type Re-wireable Flex & Plug (2 pin) EMERGENCY (EM SUFFIX) Replacement Battery Code 01303 Emergency Classification C0:D80, C90:D80 Emergency Control DALI Monitored (DT1) DALI Monitored ~ Supports Emergency test and monitoring over DALI (IEC62386) with full compliance to IEC62386-202. Emergency Duration 90 mins Emergency Lumen Output 380 lm Emergency Mode Non-Maintained Emergency Output Power 4300 mW COMPLIANCE Product Design Life 12 years The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. Standards AS/NZS 60598.1 AS 60598.2.22 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 1300 438 658 sales@evolt.com.au ektor.com.au © 2025 Evolt Generated on 5th of February 2025 04:41:42 - Page 1
AS/NZS 2293.3 WARRANTY Commercial Use Warranty 8 RTB (Total 8 Years) DIMENSIONS Cutout 70 (inner), 75-130 (outer) mm Product Diameter 84 mm Product Height 26 mm LINE DRAWINGS EV/LEDFIRE/PRO PHOTOMETRICS EV/LEDFIRE/PRO ACCESSORIES ORDER CODE ITEM CODE DESCRIPTION 00705 EV-CMS-2.4M-5PIN CMS 2.4M 5 Pin Plug Set - with Green Plug to suit GEN III ledfires Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 5th of February 2025 04:41:42 - Page 2
11790 EV-CMS-5CORE-DALI-F&P CMS 2.5M 5 core DALI flex and plug with bootlaced ends
11088 EV-GEN-DALI-JB Junction box to suit Generation 3 Products
12909 EV-LEDFIRE-SM-CAN Surface Mount Can IP20 for EV-LEDFIRE - White
00706 EV-WAGO-2.4M-F&P Wago 2.4M Plug 5-P Blue WAGO 51110475 00709 EV-WIREDBYCLICK-2.4M-F&P Wire By Click 2.4M 5-Pin Lead L1025/5 Powered by TCPDF (www.tcpdf.org) Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 5th of February 2025 04:41:42 - Page 3