0150 HEYCO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
“Stay Connected” with Liquid Tight Cordgrips 3-56 1-8 00-526-418 2 • 732-28 6-18 00 (N J) • F AX: 732-244-8 8 43 • w w w .heyco.com SEALING NUT BODY HEX LOCKNUT (optional with NPT thread) 1. Be sure that hole is free of burrs and panel surface around hole is sm ooth and free of debris. 2. U sing the hex portion on the body (not the sealing nut), screw the fitting tightly into the threaded m ounting hole. 3. Insert the cable through the fitting to the desired position. 4. H and-tighten the S EA LIN G nut as far as possible. H old the BO DY hex stationary w ith a w rench. U sing a second w rench, tighten the S EA LIN G nut until the w ire is securely held in place. 5. U sing a w rench on the BO DY hex, check to m ake sure the fitting is still screw ed tightly into the panel. 6. To disassem ble for cable replacem ent, use a w rench to hold the BO DY hex stationary and loosen the S EA LIN G nut w ith a second w rench. G rip the disconnected cable and pull w hile turning the cable in the counter- clockw ise direction. H eyco Liquid T ight C ordgrips INSTALLATION INSTRUCTIONS for TH READ ED m ounting holes: For torque inform ation, see page 3-58 or visit the Cordgrips section on w w w .heyco.com . SEALING NUT BODY HEX INTEGRAL SEALING RING LOCKNUT (optional with NPT thread) Original Series-35 H eyco-Tite THREAD TYPE TAP D RILL D ESCRIP TION PART NO. PART D IM ENSIONS AND SIZE D IAM ETER Starting F inishing M ajor Length m m . D iam eter Overall Thread m m . m m . m m . P G 7 11,5 P G T 7 0150 0151 12,5 63,0 20,0 P G 9 14,0 P G T 9 0153 0154 15,2 70,0 20,0 P G 11 17,3 P G T 11 0156 0157 18,6 80,0 22,0 P G 13.5 19,0 P G T 13.5 0159 0160 20,4 80,0 22,0 P G 16 21,3 P G T 16 0162 0163 22,5 80,0 22,0 P G 21 27,0 P G T 21 0165 0166 28,3 90,0 22,0 P G 29 35,5 P G T 29 0168 0169 37,0 110,0 25,0 *S ee page 3-49 for DIN 40430 S pecifications. H eyco PG T hread Taps For S teel Conduit Threads per DIN 40430*
- U se a starting tap for through-hole applications.
- For blind holes, thread first w ith a starting tap; finish bottom ing the threads w ith a finishing tap.
- Flank angle 80°.
- M ade of high-speed steel w ith ground threads for greater accuracy to assure optim um perform ance.
- S uitable for cutting alloy steel, bronze, and stainless.