016-0025 MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Features

  • Provides ‘Faraday Cage’ protection against ESD
  • Conforms to EIA 625, EIA 541, ANSI/ESD S-20.20
  • Semi transparent finish
  • Custom sizes and printing available on request
  • This product is fully reusable, protecting both your product and the environment Configuration(s) Our bags are available in custom sizes or in several industry standard sizes. Bags are offered heat sealed along the three edges. Additional static peel and seal lip available on request subject to MOQ. Test Conditions The following results were taken under the following environmental test conditions: Temperature: 22.3°C / Humidity: 47.5% Item: Test Standard: Result: Film Composition N/A PET-AL/PP Outer Layer Thickness Micron Meter 7 micron Bubble Layer Thickness Micron Meter 60 micron Inner Layer Micron Meter 35 micron Puncture Strength FTMS 101 14lbs

Page <2> V1.015/07/22 Bubbleshield Bag Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Part Number Table Description Part Number Bubbleshield Bag, 152mm×254mm, PK100 016-0025 Item: Test Standard: Result: Tensile Strength ASTM D882 35lbs/inch width Light Transmission ASTM D1003 41% Interior Surface Resistivity ASTM D257 108Ω Exterior Surface Resistivity ASTM D257 109Ω Metalized Layer Resistivity ASTM D257 8Ω Static Decay EIA-541 0.2secs Remains Voltage EIA-541 24V Physiological clearance certificate of used raw material Bgvv, EU, FDA Yes Test Conclusion: The anti-static moisture barrier bag is tested accordant with the relevant test standard and requirements. Test Item: Test Method: Measured Equipment(s): MDL: Lead (Pb) IEC 62321:2008 Ed.1 Sec.8 ICP-OES 2mg/kg Cadmium (Cd) IEC 62321:2008 Ed.1 Sec.8 ICP-OES 2mg/kg Mercury (Hg) IEC 62321:2008 Ed.1 Sec.7 ICP-OES 2mg/kg Hexavalent Chromium (Cr(VI)) IEC 62321:2008 Ed.1 Annex C UV-Vis 2mg/kg Polybrominated Biphenyls (PBBs) IEC 62321:2008 Ed.1 Annex A GC-MS 5mg/kg Polybrominated Diphenyl Ethers (PBDEs) IEC 62321:2008 Ed.1 Annex A GC-MS 5mg/kg