011829-000 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

SPECIFICATION CONTROL DRAWING Raychem THERMOFIT DEVICES Raychem Corporation

300 Constitution Drive

Menlo Park, CA 94025 USA TITLE: SOLDERSLEEVE* WIRE TO WIRE SPLICE, LOW TEMPERATURE UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE IN BETWEEN BRACKETS. DOCUMENT NO.: B-008-1X TOLERANCES:

0.00 N/A

0.0 N/A

0 N/A

ANGLES: N/A ROUGHNESS IN MICRON Raychem reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DCR NUMBER: D981171 REPLACES: D961365 DRAWN BY: R. MAPALO DATE: 06-29-98 REV.: SEE TABLE DOC ISSUE: SCALE: NONE SIZE: A SHEET: 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision. Selection Guide Product Revisions Size Code Color Product Dimensions Wire Gauge AWG Section mm2 Total CMA Total mm2 Wire Dimensions Part Name A min L max min max min max min max min max B min B max C max C min B-008-11 C Clear 1.7 (0.065) 26.0 (1.025) 2x26 2x24 2x0.15 2x0.4 450 1500 0.2 0.75 0.76 (0.03) 1.5 (0.06) 1.0 (0.039) B-008-13 A Red 2.3 (0.090) 31.0 (1.220) 2x22 2x18 2x0.4 2x1 1250 4000 0.6 2.0 1.5 (0.060) 2.3 (0.090) 1.8 (0.070) B-008-14 A Blue 4.3 (0.170) 36.0 (1.420) 2x18 2x12 2x1 2x2.5 3600 5000 1.8 2.5 2.0 (0.080) 4.3 (0.170) 2.3 (0.090) B-008-15 B Yellow 6.8 (0.268) 42.0 (1.660) 2x12 2x10 2x3 2x5 4800 9000 2.4 4.5 3.4 (0.135) 6.8 (0.270) 3.7 (0.145) MATERIAL 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyolefin. Transparent grey. 2. SOLDER PREFORMS WITH FLUX: (Qty. 2 except for B-008-11Qty. 1). SOLDER: TYPE Cd18 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. 3. & 4. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: See Size Code. APPLICATION 1. These controlled soldering devices ares designed to splice tin plated or bare copper wires rated for at least +85°C. 2. Temperature range: -55°C to +125°C. 3. Splices will meet performance requirements of Raychem Specification D-5023 when installed per RPIP 850-00. STRIP LENGTH: 12.5 (.5) *A trademark of Raychem Corporation.