8167814 FESTO

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Proportional directional control valve VPWI-5-L-3-G18-12-A4-D Part number: 8167814 General operating condition Data sheet Feature Value Actuation type Electrical Sealing principle Soft Mounting position Any Structural design Poppet valve with return spring Reset method Mechanical spring Dimensions W x L x H 42.2 mm x 95.3 mm x 94.3 mm Safety instructions Fail-safe position VPWI, normally closed Type of control Direct Flow direction Non-reversible Nominal width pressurization 5 mm Exhaust nominal width 5 mm Total leakage 5 l/h Symbol 00997519 Display type Color TFT Display size 1.77" Display resolution 128x160 pixels Valve function 3-way proportional directional control valve Reverse polarity protection for all electrical connections Short-circuit protection For all electrical connections Max. cable length 30 m Setpoint input 4 - 20 mA Input resistance 0.3 kOhm Analog output signal range 4 - 20 mA Max. load resistance of current output 500 Ohm Precision analog output in ± %FS 1 %FS Operating pressure 12 bar ... 13 bar Inlet pressure 1 MPa 0 MPa ... 1.3 MPa Inlet pressure 1 0 bar ... 13 bar Inlet pressure 1 psi 0 psi ... 188.5 psi Burst pressure 4 MPa Burst pressure 40 bar Burst pressure 580 psi C value 2.1 l/sbar Normal nominal flow rate (normalized to DIN 1343) 490 l/min Standard nominal flow rate 2-3 340 l/min 12/22/25 - Subject to change - Festo SE & Co. KG 1/3

Hysteresis 0.3 %FS Temperature coefficient 0.02 %/K Nominal operating voltage DC 24 V Nominal current 0.17 A Max. current consumption 525 mA Max. electrical power consumption 14.5 W Certification RCM compliance mark c UL us - Listed (OL) CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive UKCA marking (see declaration of conformity) To UK instructions for EMC To UK RoHS instructions Certificate issuing authority UL E322346 Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas Information on operating and pilot media Operation with oil lubrication not possible Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 Corrosion resistance class (CRC) 2 - Moderate corrosion stress LABS (PWIS) conformity VDMA24364-B1/B2-L Temperature of medium 0 °C ... 50 °C Degree of protection IP65 Contamination level 2 Ambient temperature 0 °C ... 50 °C Storage temperature -20 °C ... 70 °C Climatic category 3K3 as per EN 60721 Relative air humidity 0 - 85 % Non-condensing Nominal altitude of use above sea level < 3000 m NHN Sound power level 62.5 dB(A) Sound power level at a distance of 1 m 51.9 dB(A) Application note The product is suitable for industrial purposes only. Radio interference suppression measures may be required in residential areas. Product weight 370 g Repetition accuracy FS 0.3 % Electrical connection 1, function Actual value output Setpoint input Power supply Electrical connection 1, connection type Plug Electrical connection 1, connection technology M12x1 A-coded as per EN 61076-2-101 Electrical connection 1, number of pins/wires 5 Electrical connection for input 1, connection pattern 00995383 Electrical connection 1, tightening torque 1.5 Nm Type of mounting With through-hole for M4 screw With H-rail Pneumatic connection 1 G1/8 Pneumatic connection 2 G1/8 Pneumatic connection 3 G1/8 Max. tightening torque of pneumatic fitting 8.5 Nm For use in the food industry See supplementary material information Note on materials RoHS-compliant 12/22/25 - Subject to change - Festo SE & Co. KG 2/3

Cover material PA-reinforced Seals material HNBR PTFE Housing material PA-reinforced 12/22/25 - Subject to change - Festo SE & Co. KG 3/3