UPZ2D470MPD NICHICON
Document overview
- PDF pages: 2
Technical content
Page 1
ALUMINUM ELECTROLYTIC CAPACITORS
PZ series
High Voltage, Smaller-sized

High ripple current.
Load life of 2000 hours at 105°C.
PT
Suited for ballast applications.
Adapted to the RoHS directive (2002/95/EC).
Smaller
PZ
Specifications
| Item | Performance Characteristics |
| Category Temperature Range | –25 ~ +105°C |
| Rated Voltage Range | 200 ~ 450V |
| Rated Capacitance Range | 18 ~ 470µF |
| Capacitance Tolerance | ± 20% at 120Hz, 20°C |
| Leakage Current | After 1 minutes' application of rated voltage, leakage current is not more than 0.04CV+100 (µA). |
| tan δ | Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) 200 400 420 450 tan δ (MAX.) 0.12 0.15 0.20 0.20 |
| Stability at Low Temperatu | Measurement frequency : 120Hz re Rated voltage (V) 200 400 420 450 Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C 3 8 8 8 |
| Endurance | After an application of D.C. bias voltage plus the rated ripple Capacitance change Within ± 20% of initial value current for 2000 hours at 105°C the peak voltage shall not tan δ 200% or less of initial specified value exceed the rated D.C. voltage, capacitors meet the Leakage current Initial specified value or less characteristic requirements listed at right. |
| Shelf Life | After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. |
| Marking | Printed with white color letter on dark brown sleeve. |
| Rated voltage (V) | 200 | 400 | 420 | 450 |
| tan δ (MAX.) | 0.12 | 0.15 | 0.20 | 0.20 |
| Rated voltage (V) | 200 | 400 | 420 | 450 | |
| Impedance ratio ZT / Z20 (MAX.) | Z–25°C / Z+20°C | 3 | 8 | 8 | 8 |
Radial Lead Type

(mm)
fD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 fd 0.6 0.8 0.8 0.8
- Please refer to page 21 about the end seal configulation.
Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity.
Dimension table in next page.
| Capacitance change | Within ± 20% of initial value |
| tan δ | 200% or less of initial specified value |
| Leakage current | Initial specified value or less |
Type numbering system (Example : 200V 220µF)

Configuration Pb-free leadwire f D Pb-free PET sleeve 10 PD
12.5 ~ 18
HD
CAT.8100V
Page 2
ALUMINUM ELECTROLYTIC CAPACITORS
PZ series
Dimensions
| V Cap.(µF) Code | 200 | 400 | 420 | 450 | |||||
| 2D | 2G | W6 | 2W | ||||||
| 18 | 180 | .010× 31.5 | 180 | ||||||
| 22 | 220 | .010× 31.5 | 200 | ||||||
| 27 | 270 | .010× 31.5 | 240 | ||||||
| 33 | 330 | 12.5× 31.5 | 280 | ||||||
| 39 | 390 | 12.5× 31.5 | 310 | 12.5× 35.5 | 320 | ||||
| 47 | 470 | 12.5× 31.5 | 370 | 12.5× 35.5 | 360 | 12.5× 40.0 | 380 | ||
| 56 | 560 | 12.5× 35.5 | 420 | 12.5× 40.0 | 430 | .016× 31.5 | 440 | ||
| 68 | 680 | 12.5× 40.0 | 480 | .016× 31.5 | 510 | .016× 35.5 | 490 | ||
| 82 | 820 | .010× 31.5 | 400 | .016× 35.5 | 570 | .016× 40.0 | 550 | ||
| .018 × 31.5 | 550 | ||||||||
| 100 | 101 | .016× 31.5 | 580 | .016× 40.0 | 610 | .018× 35.5 | 650 | ||
| .018× 31.5 | 610 | ||||||||
| 120 | 121 | .016× 35.5 | 670 | .018× 35.5 | 660 | .018× 40.0 | 740 | ||
| .018× 31.5 | 670 | ||||||||
| 150 | 151 | 12.5× 31.5 | 620 | .016× 40.0 | 770 | .018× 40.0 | 710 | ||
| .018× 35.5 | 770 | ||||||||
| 180 | 181 | 12.5× 35.5 | 700 | .018× 40.0 | 880 | ||||
| 220 | 221 | 12.5× 40.0 | 800 | ||||||
| 270 | 271 | .016× 31.5 | 870 | ||||||
| 330 | 331 | .016× 35.5 | 1010 | ||||||
| .018× 31.5 | 1010 | ||||||||
| 390 | 391 | .016× 40.0 | 1130 | ||||||
| .018× 35.5 | 1120 | ||||||||
| 470 | 471 | .018× 40.0 | 1270 | Case size φD×L (mm) | Rated Ripple | ||||
Rated Ripple (mArms) at 105°C 120Hz
: In this case, 6 will be put at 12th digit of type numbering system.
Frequency coefficient of rated ripple current
| V | 60Hz | 120Hz | 500Hz | 1kHz | 10kHz~ |
| 200 | 0.80 | 1.00 | 1.20 | 1.30 | 1.40 |
| 400 ~ 450 | 0.80 | 1.00 | 1.25 | 1.40 | 1.50 |