UMV0G220MFD NICHICON
Document overview
- PDF pages: 1
Technical content
Page 1
ALUMINUM ELECTROLYTIC CAPACITORS
MV series
5mmL, Long Life Assurance

Extended load life of 5000 hours at +105°C, with 5mm height.
Adapted to the RoHS directive (2002/95/EC).
SV
Smaller
MV
MT Long Life MF
Specifications
| Item | Performance Characteristics |
| Category Temperature Range | –40 ~ +105°C |
| Rated Voltage Range | 4 ~ 50V |
| Rated Capacitance Range | 0.1 ~ 100µF |
| Capacitance Tolerance | ± 20% at 120Hz, 20°C |
| Leakage Current | After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. |
| tan δ | Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) 4 6.3 10 16 25 35 50 tan δ (MAX.) 0.37 0.28 0.24 0.20 0.16 0.13 0.12 |
| Stability at Low Temperature | Measurement frequency : 120Hz Rated voltage (V) 4 6.3 10 16 25 35 50 Impedance ratio Z–25°C / Z+20°C 8 4 3 2 2 2 2 ZT / Z20 (MAX.) Z–40°C / Z+20°C 14 10 7 5 3 3 3 |
| Endurance | After 5000 hours' application of rated voltage Capacitance change Within ± 30% of initial value at 105°C capacitors meet the characteristic tan δ 300% or less of initial specified value requirements listed at right. Leakage current Initial specified value or less |
| Shelf Life | After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. |
| Marking | Printed with silver color letter on dark brown sleeve. |
| Rated voltage (V) | 4 | 6.3 | 10 | 16 | 25 | 35 | 50 |
| tan δ (MAX.) | 0.37 | 0.28 | 0.24 | 0.20 | 0.16 | 0.13 | 0.12 |
| Rated voltage (V) | 4 | 6.3 | 10 | 16 | 25 | 35 | 50 | |
| Impedance ratio ZT / Z20 (MAX.) | Z–25°C / Z+20°C | 8 | 4 | 3 | 2 | 2 | 2 | 2 |
| Z–40°C / Z+20°C | 14 | 10 | 7 | 5 | 3 | 3 | 3 | |
| Capacitance change | Within ± 30% of initial value |
| tan δ | 300% or less of initial specified value |
| Leakage current | Initial specified value or less |
Type numbering system (Example : 25V 10µF)
Radial Lead Type


(mm) 4 5 6.3 1.5 2.0 2.5 0.45 0.45 0.45
Dimensions

Frequency coefficient of rated ripple current
| Frequency | 50 Hz | 120 Hz | 300 Hz | 1 kHz | 10 kHz ~ |
| Coefficient | 0.70 | 1.00 | 1.17 | 1.36 | 1.50 |
Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity.