DATASHEET SEARCH SITE

Document overview

  • PDF pages: 1

Technical content

Page 1

ALUMINUM ELECTROLYTIC CAPACITORS

MA series

5mmL, Standard, For General Purposes

PDF page 1 diagram

MT

Standard series with 5mm height.

Compliant to the RoHS directive (2002/95/EC).

High Temperature

MV Long Life

MA

MP Bi-polarized

MF Impedance

Low

Specifications

Item Performance Characteristics
Category Temperature Range –40 to +85°C
Rated Voltage Range 4 to 50V
Rated Capacitance Range 0.1 to 470µF
Rated Capacitance Tolerance ±20% at 120Hz, 20°C
Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3(µA), whichever is greater.
Tangent of loss angle (tan δ) Measurement frequency : 120Hz at 20°C Rated voltage (V) 4 6.3 10 16 25 35 50 Figures in ( ) are for tan δ (MAX.) 0.35 0.24 (0.30) 0.20 (0.24) 0.16 (0.20) 0.14 (0.18) 0.12 (0.16) 0.10 (0.13) MR series.
Stability at Low Temperature Measurement frequency : 120Hz Rated voltage (V) 4 6.3 10 16 25 35 50 Impedance ratio Z–25°C / Z+20°C 7 4 3 2 2 2 2 ZT / Z20 (MAX.) Z–40°C / Z+20°C 15 8 6 4 4 3 3
Endurance The specifications listed at right shall be met Capacitance change Within ±20% of the initial capacitance value (MR series & φ 3 product : Within ±25%) when the capacitors are restored to 20°C after tan δ 200% or less than the initial specified value the rated voltage is applied for 2000 hours at Leakage current Less than or equal to the initial specified value 85°C.
Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Marking Printed with white color letter on black sleeve.
Rated voltage (V) 4 6.3 1 0 16 25 35 50
tan δ (MAX.) 0.35 0.24 (0.30) 0.20 ( 0.24) 0.16 (0.20) 0.14 (0.18) 0.12 (0.16) 0.10 (0.13)
PDF page 1 diagram
Capacitance change Within ±20% of the initial capacitance value (MR series & φ 3 product : Within ±25%)
tan δ 200% or less than the initial specified value
Leakage current Less than or equal to the initial specified value

Type numbering system (Example : 25V 10µF)

Radial Lead Type

PDF page 1 diagram

Sleeve (P.E.T.)

φ d

PDF page 1 diagram

( φ 3 : P±0.3 )

(mm) 8 2.5 0.45

  • Please refer to page 20 about the end seal configulation.

Dimensions

V Cap.(µF) Code 4 6.3 10 16 25 35 50
0G 0J 1A 1C 1E 1V 1H
0.1 0R1 4× 5(3× 5) 1.0(1.0)
0.22 R22 4× 5(3× 5) 2.0(2.0)
0.33 R33 4× 5(3× 5) 2.8(2.8)
0.47 R47 4× 5(3× 5) 4.0(4.0)
1 010 4× 5(3× 5) 8.4(8.0)
2.2 2R2 0.3× 5 8.4 0.4× 5 13(10)
3.3 3R3 0.3× 5 10 0.4× 5 15(10) 0.4× 5 17
4.7 4R7 0.3× 5 10 0.4× 5 16(12) 0.4× 5 18 0.5× 5 20
10 100 0.3× 5 15 0.4× 5 23(18) 0.5× 5 27 0.5× 5 29 6.3× 5 33
22 220 0.3× 5 19 0.4× 5 28(21) 0.5× 5 33 0.5× 5 37 6.3× 5 42 6.3× 5 46 0.8× 5 52(48)
33 330 0.4× 5 28 0.5× 5 37 0.5× 5 41 6.3× 5 49(43) 6.3× 5 52 0.8× 5 62(52) 0.8× 5 71
47 470 0.4× 5 33 0.5× 5 45 6.3× 5 52(4 3) 6.3× 5 58 0.8× 5 70(62) 0.8× 5 80
100 101 0.5× 5 56 6.3× 5 70(68) 0.8× 5 80(7 6) 0.8× 5 92(86) 0.8× 5 110
220 221 6.3× 5 96 0.8× 5 110(90) 0.8× 5 13 5
330 331 0.8× 5 145 0.8× 5 170 Case size φD×L (mm) Rated ripple
470 471 0.8× 5 185
Size φ3 × 5 is available for capacitors marked. " "/ Size φ5 × 5 is available for capacitors marked. " " Rated ripple current (mArms) at 85°C 120Hz Size φ6.3 × 5 is available for capacitors marked. " " In such a case, MRwill be put at 2nd and 3rd digit of type numbering system. ( ) = φ3 units and MR series.

Frequency coefficient of rated ripple current

Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or mor
Coefficient 0.70 1.00 1.17 1.36 1.50

Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.

CAT.8100B