UMF0J010MDD NICHICON

Document overview

  • PDF pages: 1

Technical content

Page 1

ALUMINUM ELECTROLYTIC CAPACITORS

MF series

5mmL, Low Impedance

PDF page 1 diagram

Low impedance over wide temperature range of –55 ~ +105°C, with 5mm height.

Suited for DC-DC converters where smaller case size and lower impedance are required.

Adapted to the RoHS directive (2002/95/EC).

MF Low MT Impedance

Specifications

Item Performance Characteristics
Category Temperature Range –55 ~ +105°C
Rated Voltage Range 6.3 ~ 35V
Rated Capacitance Range 1 ~ 100µF
Rated Capacitance Tolerance ±20% at 120Hz, 20°C
Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
tan δ Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) 6.3 10 16 25 35 tan δ (MAX.) 0.22 0.20 0.18 0.14 0.12
Stability at Low Temperature Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 Impedance ratio Z–25°C / Z+20°C 2 2 2 2 2 ZT / Z20 (MAX.) Z–55°C /Z+20°C 4 4 3 3 3
Endurance After 1000 hours' application of rated voltage Capacitance change Within ±20% of initial value at 105°C capacitors meet the characteristic tan δ 200% or less of initial specified value requirements listed at right. Leakage current Initial specified value or less
Shelf Life After storig the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
Marking Printed with white color letter on dark brown sleeve.
6.3 10 16 25 35
0.22 0.20 0.18 0.14 0.12
PDF page 1 diagram
Capacitance change Within ±20% of initial value
tan δ 200% or less of initial specified value
Leakage current Initial specified value or less

Radial Lead Type

Sleeve (P.E.T.)

φ d

PDF page 1 diagram

Dimensions

Type numbering system (Example : 25V 10µF)

1 2 3 4 5 6 7 8 9 10 11

PDF page 1 diagram

Pb-free leadwire φ D Pb-free PET sleeve 4 ~ 6.3

DD

V Cap.(µF) Code 6.3 0J 10 16 25 35
1A 1C 1E 1V
1 010 4× 5 5.0 50
1.5 1R5 4× 5 5.0 50
2.2 2R2 4× 5 5.0 50
3.3 3R3 4× 5 5.0 50
4.7 4R7 4× 5 5.0 50 4× 5 5.0 50
6.8 6R8 4× 5 5.0 50 5× 5 2.6 80
10 100 4× 5 5.0 50 5× 5 2.6 80 5× 5 2.6 80
15 150 5× 5 2.6 80 6.3× 5 1.3 115 6.3× 5 1.3 115
22 220 4× 5 5.0 50 5× 5 2. 6 80 5× 5 2.6 80 6.3× 5 1.3 115 6.3× 5 1.3 115
33 330 5× 5 2.6 80 5× 5 2. 6 80 6.3× 5 1.3 115 6.3× 5 1.3 115
47 470 5× 5 2.6 80 6.3× 5 1. 3 115 6.3× 5 1.3 115
68 680 6.3× 5 1.3 115 Case size φD×L (mm) Impedance Rated ripple
100 101 6.3× 5 1.3 115

Max. Impedance (Ω) at 20°C 100kHz Rated Ripple (mArms) at 105°C 100kHz

Frequency coefficient of rated ripple current

Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz ~
Coefficient 0.35 0.50 0.64 0.83 1.00

Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity.

CAT.8100V