UMA0G100MDD NICHICON

Document overview

  • PDF pages: 1

Technical content

Page 1

ALUMINUM ELECTROLYTIC CAPACITORS

MA series

5mmL, Standard, For General Purposes

PDF page 1 diagram

MT

PDF page 1 diagram

Standard series with 5mm height.

Adapted to the RoHS directive (2002/95/EC).

Specifications

Item Performance Characteristics
Category Temperature Range –40 ~ +85°C
Rated Voltage Range 4 ~ 50V
Rated Capacitance Range 0.1 ~ 470µF
Rated Capacitance Tolerance ±20% at 120Hz, 20°C
Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3(µA), whichever is greater.
tan δ Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) 4 6.3 10 16 25 35 50 Figures in ( ) are for tan δ (MAX.) 0.35 0.24 (0.30) 0.20 (0.24) 0.16 (0.20) 0.14 (0.18) 0.12 (0.16) 0.10 (0.13) MR series.
Stability at Low Temperature Measurement frequency : 120Hz Rated voltage (V) 4 6.3 10 16 25 35 50 Impedance ratio Z–25°C / Z+20°C 7 4 3 2 2 2 2 ZT / Z20 (MAX.) Z–40°C / Z+20°C 15 8 6 4 4 3 3
Endurance After 2000 hours' application of rated voltage Capacitance change Within ±20% of initial value (MR series & φ 3 product : Within ±25%) at 85°C, capacitors meet the characteristic tan δ 200% or less of initial specified value requirements listed at right. Leakage current Initial specified value or less
Shelf Life After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
Marking Printed with white color letter on black sleeve.
Rated voltage (V) 4 6.3 10 16 25 35 50
tan δ (MAX.) 0.35 0.24 (0.30) 0.20 (0 .24) 0.16 (0.20) 0.14 (0.18) 0.12 (0.16) 0.10 (0.13)
Rated voltage (V) 4 6.3 10 16 25 35 50
Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C 7 4 3 2 2 2 2
Z–40°C / Z+20°C 15 8 6 4 4 3 3
Capacitance change Within ±20% of initial value (MR series & φ 3 product : Within ±25%)
an δ 200% or less of initial specified value
Leakage current Initial specified value or less

Type numbering system (Example : 25V 10µF)

Radial Lead Type

PDF page 1 diagram
PDF page 1 diagram

(f3: P±0.3 )

(mm)

3 4 5 6.3 8

P 1.0 1.5 2.0 2.5 2.5 f d 0.4 0.45 0.45 0.45 0.45

  • Please refer to page 21 about the end seal configulation.

Dimensions

V Cap.(µF) Code 4 6.3 10 16 25 35 50
0G 0J 1A 1C 1E 1V 1H
0.1 0R1 4× 5(3× 5) 1.0(1.0)
0.22 R22 4× 5(3× 5) 2.0(2.0)
0.33 R33 4× 5(3× 5) 2.8(2.8)
0.47 R47 4× 5(3× 5) 4.0(4.0)
1 010 4× 5(3× 5) 8.4(8.0)
2.2 2R2 0.3× 5 8.4 0.4× 5 13(10)
3.3 3R3 0.3× 5 10 0.4× 5 15(10) 0.4× 5 17
4.7 4R7 0.3× 5 10 0.4× 5 16(12) 0.4× 5 18 0.5× 5 20
10 100 0.3× 5 15 0.4× 5 23(18) 0.5× 5 27 0.5× 5 29 6.3× 5 33
22 220 0.3× 5 19 0.4× 5 28(21) 0.5× 5 33 0.5× 5 37 6.3× 5 42 6.3× 5 46 0.8× 5 52(48)
33 330 0.4× 5 28 0.5× 5 37 0.5× 5 41 6.3× 5 49(43) 6.3× 5 52 0.8× 5 62(52) 0.8× 5 71
47 470 0.4× 5 33 0.5× 5 45 6.3× 5 52(43 ) 6.3× 5 58 0.8× 5 70(62) 0.8× 5 80
100 101 0.5× 5 56 6.3× 5 70(68) 0.8× 5 80(76 ) 0.8× 5 92(86) 0.8× 5 110
220 221 6.3× 5 96 0.8× 5 1 10(90) 0.8× 5 135
330 331 0.8× 5 145 0.8× 5 170 Case size φD×L (mm) Rated ripple
470 471 0.8× 5 185
Size φ3 × 5 is available for capacitors marked. " "/ Size φ5 × 5 is available for capacitors marked. " " Rated Ripple (mArms) at 85°C 120Hz Size φ6.3 × 5 is available for capacitors marked. " " In such a case, MRwill be put at 2nd and 3rd digit of type numbering system.

( ) = φ3 units and MR series.

Frequency coefficient of rated ripple current

10 kHz ~

Frequency 50 Hz 120 Hz 300 Hz 1 kHz
Coefficient 0.70 1.00 1.17 1.36

Please refer to page 21, 22, 23 about the formed or taped product spec.

1.50

Please refer to page 3 for the minimum order quantity.

CAT.8100V