UFG0J471MDM NICHICON
Document overview
- PDF pages: 2
Technical content
Page 1
ALUMINUM ELECTROLYTIC CAPACITORS
FG series
High Grade Standard Type, For Audio Equipment

"Fine Gold" MUSE acoustic series suited for high grade
audio equipment, using state of the art etching techniques.
Rich sound in the bass register and clearer high end, most
suited for AV equipment like DVD, MD.
Adapted to the RoHS directive (2002/95/EC).
FG
KZ
FW
High Grade
High Grade
Specifications
| Item | Performance Characteristics |
| Category Temperature Range | –40 ~ +85°C |
| Rated Voltage Range | 6.3 ~ 100V |
| Rated Capacitance Range | 0.1 ~ 10000µF |
| Capacitance Tolerance | ± 20% at 120Hz, 20°C |
| Leakage Current | After 1 minute's application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. |
| tan δ | Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 tan δ (MAX.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 For capacitance of more than 1000µF add 0.02 for every increase of 1000µF. |
| Stability at Low Temperature | Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Impedance ratio Z–25°C / Z+20°C 4 3 2 2 2 2 2 2 2 ZT / Z20 (MAX.) Z–40°C / Z+20°C 8 6 4 4 3 3 3 3 3 |
| Endurance | After 1000 hours' Within ±20% of the initial measurement for units of not more than 16V or φ6.3 application of rated voltage Capacitance change Within ±15% of the initial measurement for units of not less than 25V or above φ6.3 at 85°C, capacitors meet tan δ 150% or less of initial specified value the characteristic requirements listed at right. Leakage current Initial specified value or less |
| Shelf Life | After storimg the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. |
| Marking | Printed with black color letter on gold sleeve. |
| Rated voltage (V) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 80 | 100 |
| tan δ (MAX.) | 0.22 | 0.19 | 0.16 | 0.14 | 0.12 | 0.10 | 0.09 | 0.09 | 0.08 |
| Rated voltage (V) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 80 | 100 | |
| Impedance ratio ZT / Z20 (MAX.) | Z–25°C / Z+20°C | 4 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Z–40°C / Z+20°C | 8 | 6 | 4 | 4 | 3 | 3 | 3 | 3 | 3 | |
| Capacitance change | Within ±20% of the initial measurement for units of not more than 16V or φ6.3 Within ±15% of the initial measurement for units of not less than 25V or above φ6.3 |
|---|---|
| tan δ | 150% or less of initial specified value |
| Leakage current | Initial specified value or less |
Radial Lead Type

(mm)
| fD | 5 | 6.3 | 8 | 10 | 12.5 | 16 | 18 |
| P | 2.0 | 2.5 | 3.5 | 5.0 | 5.0 | 7.5 | 7.5 |
| fd | 0.6 | 0.6 | 0.6 | 0.6 | 0.8 | 0.8 | 0.8 |
(L < 20) 1.5 (L 20) 2.0
- Please refer to page 21 about the end seal configulation.
Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity.
Dimension table in next page.
Type numbering system (Example : 10V 47µF)
1 2 3 4 5 6 7 8 9 10 11

CAT.8100V
Page 2
ALUMINUM ELECTROLYTIC CAPACITORS
FG series
Dimensions
| V Cap.(µF) Code | 6.3 | 10 | 16 | 25 | 35 | 50 | |||||||
| 0J | 1A | 1C | 1E | 1V | 1H | ||||||||
| 0.1 | 0R1 | 05× 11 | 1.1 | ||||||||||
| 0.22 | R22 | 05× 11 | 2.4 | ||||||||||
| 0.33 | R33 | 05× 11 | 3.6 | ||||||||||
| 0.47 | R47 | 05× 11 | 5.0 | ||||||||||
| 1 | 010 | 05× 11 | 9.0 | ||||||||||
| 2.2 | 2R2 | 05× 11 | 18 | ||||||||||
| 3.3 | 3R3 | 05× 11 | 22 | ||||||||||
| 4.7 | 4R7 | 05× 11 | 27 | ||||||||||
| 10 | 100 | 05× 11 | 39 | ||||||||||
| 22 | 220 | 05× 11 | 50 | 6.3× 11. | 60 | 6.3× 11. | 65 | ||||||
| 33 | 330 | 05× 11 | 57 | 6.3× 11. | 70 | 6.3× 11. | 75 | 0.08× 11.5 | 93 | ||||
| 47 | 470 | 05× 11 | 60 | 6.3× 11. | 74 | 6.3× 11. | 85 | 0.8× 11.5 | 101 | 0.08× 11.5 | 111 | ||
| 100 | 101 | 6.3× 11. | 99 | 0.8× 11.5 | 128 | 0.08× 11.5 | 140 | 0.10× 12.5 | 176 | 10× 16 | 215 | ||
| 220 | 221 | 0.08× 11.5 | 170 | 0.10× 12.5 | 226 | 10× 16 | 260 | 10× 20 | 320 | 12.5× 200. | 390 | ||
| 330 | 331 | 0.10× 12.5 | 247 | 10× 16 | 309 | 10× 20 | 351 | 12.5× 200. | 446 | 12.5× 200. | 488 | ||
| 470 | 471 | 0.10 × 12.5 | 270 | 10× 16 | 330 | 10× 20 | 406 | 12.5× 20.0 | 476 | 12.5× 250. | 590 | 16× 25 | 650 |
| 1000 | 102 | 10 × 20 | 485 | 12.5× 200. | 601 | 12.5× 250. | 723 | 16× 25 | 854 | 16× 25 | 1060 | 0.16× 31.5 | 1143 |
| 2200 | 222 | 12.5 × 250. | 867 | 16× 25 | 1047 | 16× 25 | 1290 | 0.16× 35.5 | 1570 | 0.18× 35.5 | 1840 | ||
| 3300 | 332 | 16 × 25 | 1135 | 0.16× 31.5 | 1520 | 0.16× 35.5 | 1720 | 18× 40 | 1794 | ||||
| 4700 | 472 | 0.16 × 31.5 | 1431 | 0.16× 35.5 | 1840 | 0.18× 35.5 | 2140 | ||||||
| 6800 | 682 | 0.18 × 35.5 | 1810 | 18× 40 | 2049 | ||||||||
| 10000 | 103 | 18 × 40 | 2100 | ||||||||||
| V Cap.(µF) Code | 63 | 80 | 100 | ||||
| 1J | 1K | 2A | |||||
| 0.1 | 0R1 | 05× 11 | 2.3 | ||||
| 0.22 | R22 | 05× 11 | 5.5 | ||||
| 0.33 | R33 | 05× 11 | 8.0 | ||||
| 0.47 | R47 | 05× 11 | 10 | ||||
| 1 | 010 | 05× 11 | 15 | ||||
| 2.2 | 2R2 | 05× 11 | 22 | ||||
| 3.3 | 3R3 | 05× 11 | 27 | ||||
| 4.7 | 4R7 | 05× 11 | 36 | ||||
| 10 | 100 | 6.3× 11. | 50 | 6.3× 11. | 055 | 0.08× 11.5 | 65 |
| 22 | 220 | 0.08× 11.5 | 85 | 11.8× 11.5 | 100 | 0.10× 12.5 | 110 |
| 33 | 330 | 0.08× 11.5 | 105 | 0.10× 12.5 | 130 | 10× 16 | 150 |
| 47 | 470 | 0.10× 12.5 | 140 | 10× 16 | 170 | 10× 20 | 190 |
| 100 | 101 | 10× 20 | 255 | 12.5× 20.0 | 270 | 12.5× 200 | 300 |
| 220 | 221 | 12.5× 200. | 420 | 12.5× 25.0 | 490 | 16× 25 | 549 |
| 330 | 331 | 12.5× 250. | 541 | .016× 31.5 | 650 | 0.16× 31.5 | 734 |
| 470 | 471 | 16× 25 | 840 | .016× 35.5 | 920 | 0.18× 35.5 | 980 |
| 1000 | 102 | 0.18× 35.5 | 1400 | Case size φD × L (mm) | Rated ripple | ||
Rated Ripple (mArms) at 85°C 120Hz
Frequency coefficient of rated ripple current
| Frequency Cap.(µF) | 50Hz | 120Hz | 300Hz | 1kHz | 10kHz ~ |
| ~ 47 | 0.75 | 1.00 | 1.35 | 1.57 | 2.00 |
| 100 ~ 470 | 0.80 | 1.00 | 1.23 | 1.34 | 1.50 |
| 1000 ~ 10000 | 0.85 | 1.00 | 1.10 | 1.13 | 1.15 |