TV05A190JB-G

TV05A5V0-G COMCHIP

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

-Glass passivated chip. -Low leakage. -500W peak pulse power capability with a 10/1000μs waveform, repetitive rate (duty cycle): 0.01%. -Uni and Bidirectional unit. -Excellent clamping capability. -Very fast response time. Mechanical data -Case: JEDEC DO-214AC, molded plastic. -Polarity: Color band denotes cathode end. -Approx. weight: 0.069 grams TV05A5V0-G Thru. TV05A191-G Maximum Ratings and Electrical CharacteristicsO Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeter) DO-214AC (SMA) QW-BTV19 Notes: 1. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. Comchip Technology CO., LTD. 0.109(2.76) 0.099(2.51) 0.064(1.63) 0.048(1.23) 0.206(5.22) 0.006(0.15) 0.008(0.20) 0.000(0.00) 0.059(1.51) 0.030(0.75) 0.089(2.26) 0.077(1.96) 0.175(4.44) 0.155(3.94) Peak power dissipation on 10/1000μs waveform Peak pulse current on 10/1000μs waveform Power dissipation on infinite heatsink at TL=75°C Peak forward surge current, 8.3ms single half sine-wave, uni-directional only (Note 1) Maximum instantaneous forward voltage at 25.0A for uni-directional only Operating junction temperature range Storage temperature range Value UnitsSymbolCharacteristics PPP IPP PD IFSM VF TJ TSTG Minimum 500 See Next Table 3.0 3.5 -55 to +150 Watts A Watts A V -Terminals: Axial leads, solderable per -MIL-STD-202, method 208. -Epoxy: UL 94V-0 rate flame retardant. -Mounting position: Any. -55 to +150 Company reserves the right to improve product design , functions and reliability without notice.

RATING AND CHARACTERISTIC CURVES (TV05A5V0-G Thru. TV05A191-G) Pulse Width, td 1001010.1 Fig.4 - Peak Pulse Power Rating Curve 0.1 100 Peak Power (kW) Ambient Temperature, (TA °C) Fig.1 - Pulse Derating Curve 140 Comchip Technology CO., LTD. Page 2 REV:B 50 100 175150 SMD Transient Voltage Suppressor 100001000 25 125 100 120 Lead Temperature, (°C)TL Fig.2 - Steady State Power Derating Curve Steady State Power Dissipation, (W) 0.5 1.5 3.5 25 75 100 175 1.0 3.0 50 125 150 2.5 2.0 Number of Cycles at 60Hz Fig.3 - Max. Non-repetitive Surge Current Peak Forward Surge Current, (A) 10 100 8.3mS single half sine-wave TJ = TJ max. Peak Pulse Derating in % of Peak Power or Current (%) Time, (ms) Fig.5 - Pulse Waveform Peak Pulse Current, (%) 125 1 2 3 4 100 td Pulse width (td) is defined as the point where the peak current decays to 50% of IPP Tr = 10μs Peak value IPP Half value = IPP/2 10/1000μs. Waveform as defined by R.E.A. TJ = 25°C Company reserves the right to improve product design , functions and reliability without notice.

Comchip Technology CO., LTD. Page 3 REV:B SMD Transient Voltage Suppressor VBR Min. (V) V BRMax. (V) IT(mA) UNI BI Maximum Reverse Surge Current @ 10/1000us sinewave IPP (A) Maximum Clamping Voltage @IPP VC (V) Marking Code Part No Breakdown voltage VBR @ IT Maximum Reverse Leakage @VRWM IR (uA) Working Peak Reverse Voltage VRWM (V) Company reserves the right to improve product design , functions and reliability without notice. TV05A640J(B)-G 71.1 78.6 1 5 64.0 4.85 103 5RP 5ZP TV05A700J(B)-G 77.8 86.0 1 5 70.0 4.42 113 5RR 5ZR TV05A750J(B)-G 83.3 92.1 1 5 75.0 4.13 121 5RT 5ZT 86.7 95.8 1 5 78.0 3.97 126TV05A780J(B)-G 5RV 5ZV 88.8 97.6 1 5 80.0 3.86 130TV05A800J(B)-G 5RX 5ZX 94.4 104 1 5 85.0 3.65 137TV05A850J(B)-G 5RZ 5ZZ

REV:B SMD Transient Voltage Suppressor VBR Min. (V) V BRMax. (V) IT(mA) UNI BI Maximum Reverse Surge Current @ 10/1000us sinewave IPP (A) Maximum Clamping Voltage @IPP VC (V) Marking Code Part No Breakdown voltage VBR @ IT Maximum Reverse Leakage @VRWM IR (uA) Working Peak Reverse Voltage VRWM (V) Notes: 1. Suffix J denotes 5% tolerance devices. 2. Suffix B after part number to specify bi-directional devices. 3. For bi-directional devices having VR of 10 volts and under, the IR limit is double. 4. . For Uni-directional devices VF max=3.5V at IF=25 A 300us square wave pulse 100 111 1 5 90.0 3.42 146TV05A900J(B)-G 5SE 5VE 111 123 1 5 100 3.09 162TV05A101J(B)-G 5SG 5VG 122 135 1 5 110 2.82 177TV05A111J(B)-G 5SK 5VK TV05A121J(B)-G 133 147 1 5 120 2.59 193 5SM 5VM TV05A131J(B)-G 144 159 1 5 130 2.39 209 5SP 5VP TV05A141J(B)-G 155 171 1 5 140 2.20 227 5SR 5VR TV05A151J(B)-G 167 185 1 5 150 2.06 243 5ST 5VT TV05A161J(B)-G 178 197 1 5 160 1.93 259 5SV 5VV TV05A171J(B)-G 189 209 1 5 170 1.82 275 5SX 5VX TV05A181J(B)-G 200 220 1 5 180 1.71 292 5SZ 5VZ TV05A191J(B)-G 211 232 1 5 190 1.62 308 5TE 5UE Company reserves the right to improve product design , functions and reliability without notice. Comchip Technology CO., LTD.

Comchip Technology CO., LTD. Page 5 REV:B SMD Transient Voltage Suppressor B C d D D2D1SYMBOL A (mm) (inch) 1.969 MIN. 4.00 ± 0.10 330MAX SYMBOL (mm) E F P P0 P1 W W1 1.75 ± 0.10 0.069 ± 0.004 5.50 ± 0.05 0.216 ± 0.002 o 120 Trailer Device Leader 10 pitches (min)10 pitches (min) D1 D2 D T C Direction of Feed Reel Taping Specification Index hole d E F B W P A Company reserves the right to improve product design , functions and reliability without notice. DO-214AC (SMA) DO-214AC (SMA)

Comchip Technology CO., LTD. Page 6 REV:B SMD Transient Voltage Suppressor Marking Code C XXX 1. C: COMCHIP PKG SMA SMB SMC A B C 3. XXX: Marking code (see Page.3~4) 2. : Package 4. : Cathod Band Standard Packaging Case Type 5,000 REEL ( pcs ) Reel Size (inch) REEL PACK DO-214AC (SMA) Company reserves the right to improve product design , functions and reliability without notice. C D B A SIZE (inch) 0.208 (mm) 5.28

1.88 MAX

1.52 MIN

0.074 MAX

0.060 MIN

1.68 MIN 0.066 MIN B C D A DO-214AC(SMA) Suggested PAD Layout