TSR1-2425

TSR1 TRACOPOWER

Document overview

• PDF pages: 3

Technical content

Page 1

Non-Isolated DC/DC Converter (POL)

• Up to 96% efficiency – No heat-sink required
• Pin compatible with LMxx linear regulators
• SIP-package fits existing TO-220 footprint

The TSR 1 series step-down switching regulators are drop-in replacement for

• Built in filter capacitors

inefficient 78xx linear regulators. A high efficiency up to 96% allows full load

• Operation temp. range –40°C to +85°C operation up to +60°C ambient temperature without the need of any heat-sink

or forced cooling. The TSR 1 switching regulators provide other significant fea-

• Short circuit protection

tures over linear regulators, i.e. better output accuracy (±2%), lower standby

• Wide input operating range

current of 2 mA and no requirement of external capacitors. The high efficiency and low standby power consumption makes these regulators an ideal solution

• Excellent line / load regulation

for many battery powered applications.

• Low standby current
• 3-year product warranty

Models

Note - For input voltage higher than 32 VDC an external input capacitor (22 µF) is required.

November 30, 2022

Page 1 / 3

Page 2

Input Specifications

Input Current

• At no load
• At full load

Reflected Ripple Current Recommended Input Fuse - 9 Vin input

• 12 Vin input
• 24 Vin input

Input Filter

Output Specifications

Voltage Set Accuracy Regulation

• Input Variation (Vmin - Vmax) - Load Variation (10 - 100%)

Ripple and Noise (20 MHz Bandwidth)

Capacitive Load Minimum Load Temperature Coefficient Start-up Overshoot Voltage Short Circuit Protection Output Current Limitation Transient Response

• Peak Variation - Response Time

EMC Specifications

EMI Emissions

• Conducted Emissions - Radiated Emissions

General Specifications

Relative Humidity Temperature Ranges

• Operating Temperature - Storage Temperature

Power Derating

• High Temperature

Over Temperature

• Protection Mode

Protection Switch Off

• Measurement Point

Cooling System

9 Vin models: 1 mA typ. 12 Vin models: 1 mA typ. 24 Vin models: 1 mA typ. 9 Vin models: 1'000 mA max. 12 Vin models: 1'000 mA max. 24 Vin models: 1'000 mA max.

(at Vin min.) 150 mAp-p typ.

1.2 Vout models: 630 mA (slow blow) 1.5 Vout models: 800 mA (slow blow) 1.8 Vout models: 800 mA (slow blow) 2.5 Vout models: 1'250 mA (slow blow) 3.3 Vout models: 1'250 mA (slow blow) 5 Vout models: 1'600 mA (slow blow) 6.5 Vout models: 1'250 mA (slow blow) 9 Vout models: 1'250 mA (slow blow) 12 Vout models: 1'600 mA (slow blow) 15 Vout models: 1'600 mA (slow blow)

(The need of an external fuse has to be assessed in the final application.) Internal Capacitor

±2% max. 0.2% max. 0.6% max. (1.2 & 1.5 Vout models) 0.4% max. (other models)

9 Vin models: 50 mVp-p typ. 12 Vin models: 50 mVp-p typ. 24 Vin models: 75 mVp-p typ.

470 µF max. Not required ±0.015 %/K max. 1% max. Continuous, Automatic recovery 250% typ. of Iout max. 150 mV typ. / 200 mV max. (50% Load Step) 250 µs typ. / 350 µs max. (50% Load Step)

EN 55032 class A (with external filter) EN 55032 class A (with external filter)

External filter proposal: www.tracopower.com/overview/tsr1

95% max. (non condensing) –40°C to +85°C –55°C to +125°C 2.4 %/K above 60°C

See application note: www.tracopower.com/overview/tsr1

150°C typ. (Automatic recovery) Internal IC temperature Natural convection (20 LFM)

All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated.

November 30, 2022

Page 2 / 3

Page 3

Switching Frequency

Insulation System Reliability

• Calculated MTBF

Washing Process

400 - 600 kHz (PWM) 500 kHz typ. (PWM) Non-isolated 25'710'000 h (MIL-HDBK-217F, ground benign) Allowed (hermetical product)

See Cleaning Guideline:

Environment

• Vibration - Thermal Shock

Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Environmental Compliance - REACH Declaration

• RoHS Declaration

Supporting Documents

Overview Link (for additional Documents)

Outline Dimensions

© Copyright 2022 Traco Electronic AG

www.tracopower.com/info/cleaning.pdf MIL-STD-810F MIL-STD-810F Non-conductive Plastic (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Copper Nickel (2 - 3 µm) Tin (3 - 5 µm), matte Plastic Case PCB Mount THD (Through-Hole Device) SIP3 265°C / 10 s max. 1.9 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.)

www.tracopower.com/overview/tsr1

Specifications can be changed without notice.

Rev. November 30, 2022

Page 3 / 3