TS61001

TS61001 ETC2

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

• 1 - TS61001 Version 1.0 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2013, Triune Systems, LLC Triune Systems Proprietary and Confidential Information DO NOT DUPLICATE TYPICAL APPLICATION Load Receiver TS51111 Transmitter TS80000 TS61001 DC Supply

DESCRIPTION

The TS61001 is a high-voltage FET driver that can be used to drive N -channel devices in full or half bridge configurations. The TS61001 can support various power converter applications , multiple standard and proprietary wireless power applications, and motor driver systems.

APPLICATIONS

 Multi-standard compliant and non -compliant wireless chargers for: o Cell Phones and Smartphones o GPS Devices o Digital Cameras o Tablets and eReaders o Portable Lighting  Full and half-bridge power converters  Motor drive applications

FEATURES

 Supports Qi® , PMA, A4WP and proprietary wireless power applications  Power outputs scalable based on FET size  Support for half and full-bridge power sections  Integrated comparator  Low external component count  Available in 28 pin 5x5 QFN SPECIFICATIONS  Drives both low side and high side N -channel MOSFETS  6Ω pull-up, 2Ω pull-down gate drivers  Independent TTL compatible inputs  Floating gate drive and bootstrap circuits for driving high side devices – up to 85V for the bootstrap supply voltage  5 - 12V gate drive capability allows compatibility with a wide range of FETs  Fast propagation delays (<50nS typical)  Matched channel to channel delays (<25nS mismatch)  Fast rise and fall times  Optional break before make detection to set minimum dead time protection  Available comparator, amplifier and 3.3V linear regulator (10mA capability) for supporting circuitry  Under voltage lock out protection  Over temperature shut down (TSD) protection Full-bridge FET Driver

• 2 - TS61001 Version 1.0 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2013, Triune Systems, LLC Triune Systems Proprietary and Confidential Information DO NOT DUPLICATE PINOUT (Top View)

• 3 - TS61001 Version 1.0 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2013, Triune Systems, LLC Triune Systems Proprietary and Confidential Information DO NOT DUPLICATE PIN DESCRIPTION QFN Pin # Pin Symbol Function Description

1 VS1 FET drive High side MOSFET source #1

2 HO1 FET drive High side MOSFET gate drive #1

3 LO1 FET drive Low side MOSFET gate drive #1

4 VCCG Input power Input power supply (gate driver supply)

5 PGND Power GND Power GND for drivers

6 LO2 FET drive Low side MOSFET gate drive #2

7 HO2 FET drive High side MOSFET gate drive #2

8 VS2 FET drive High side MOSFET source #2

9 VB2 Bootstrap Bootstrap for gate drive #2

10 LS1ON PWM1_L Low-side gate control #1

11 HS1ON PWM1_H High-side gate control #1

12 LS2ON PWM2_L Low-side gate control #2

13 AGND Analog GND Analog GND

14 V5INT Decoupling Internal 5V regulator decoupling

15 SDATA I2C Data I2C data

16 SCLK I2C Clock I2C clock

17 V3P3 Decoupling Internal 3.3V regulator decoupling

18 HS2ON PWM2_H High-side gate control #2

19 COMPOUT Comparator Comparator output

20 COMPN Comparator Comparator input (-)

21 COMPP Comparator Comparator input (+)

22 PGND Power GND Power GND

23 NC No Connect No Connect

24 PGND Power GND Power GND

25 VCC Input power Input power supply (main supply)

26 /SLEEP Disable Disable Pin (active low)

27 PGOOD Output Signal Power Good Status

28 VB1 Bootstrap Bootstrap for gate drive #1

• 4 - TS61001 Version 1.0 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2013, Triune Systems, LLC Triune Systems Proprietary and Confidential Information DO NOT DUPLICATE ABSOLUTE MAXIMUM RATINGS Over operating free–air temperature range unless otherwise noted(1, 2) Parameter Value Unit VCC, VCCG 13.2 V VB1, VB2 13.2 (relative to VS1,2) V SDATA, SCLK 3.6 V LS1ON, LS2ON, HS1ON, HS2ON 3.6 V COMPN, COMPP, AMPN, AMPP, COMPOUT, AMPOUT 3.6 V Electrostatic Discharge – Human Body Model +/-2k V Electrostatic Discharge – Charge Device Model +/-500 V Lead Temperature (soldering, 10 seconds) 260 C (1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress rati ngs only and functional operation of the device at these or any other conditions beyond those indicated under “recommen ded operating conditions” is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability. (2) All voltage values are with respect to network ground terminal. THERMAL CHARACTERISTICS Symbol Parameter Value Unit JA Thermal Resistance Junction to Air (Note 1) 34.5 °C/W JC Thermal Resistance Junction to Case (Note 1) 2.5 °C/W TSTG Storage Temperature Range -65 to 150 °C TJ MAX Maximum Junction Temperature 150 °C TJ Operating Junction Temperature Range -40 to 125 °C Note 1: Assumes 16LD 3x3 QFN with hi-K JEDEC board and 13.5 inch2 of 1 oz Cu and 4 thermal vias connected to PAD RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Typ Max Unit VCC Input Operating Voltage 5 12 12.5 V CBST Bootstrap Capacitor 100 nF

• 5 - TS61001 Version 1.0 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2013, Triune Systems, LLC Triune Systems Proprietary and Confidential Information DO NOT DUPLICATE

ELECTRICAL CHARACTERISTICS

Electrical Characteristics, TJ = -40C to 125C, VCC = 12V (unless otherwise noted) Symbol Parameter Condition Min Typ Max Unit VCC Supply Voltage VCC Input Supply Voltage 5 12 12.5 V Iq Input Supply current /SLEEP = Hi; No loads; Gate drivers off 0.5 1.5 3 mA Iq Input Supply current /SLEEP = Hi; Gate driver Fs = 200KHz (no load) 4 5 mA Iqq_sleep Stand by current /SLEEP = 0V; Inputs driven Low 3 10 uA Ron Characteristics Ron (pulldown) HS,LS pull down device 12V VCC 1.4 2 Ω Ron (pullup) HS, LS pull up device 12V VCC 4.0 6.5 Ω Under Voltage Lock Out UVLO (rise) UV threshold (VCCG) Rising threshold measurement 4.1 4.35 4.5 UVLO (fall) UV threshold (VCCG) Falling threshold measurement 3.8 4 4.3 UVLO (hyst) UV hysteresis (VCCG) Hysteresis 0.15 0.25 UVLO (rise) UV threshold (VCC) Rising threshold measurement 4.1 4.35 4.5 UVLO (fall) UV threshold (VCC) Falling threshold measurement 3.8 4 4.3 UVLO (hyst) UV hysteresis (VCC) Hysteresis 0.15 0.25 Input Pins VIH & VIL VIH Digital Input Pins Gate driver inputs, I2C 1.5 2.2 VIL Digital Input Pins Gate driver inputs, I2C 0.8 1.3 Hyst Digital Input Pins Gate driver inputs, I2C 0.1 0.2 Propagation Delays & Rise/Fall times TPLShl Prop delay (LS) high to low LSxON to LO1 (11V) 15 50 nS TPLSlh Prop delay (LS) low to high LSxON to LO1(1V) 15 50 nS TPHShl Prop delay (HS) high to low HSxON to HOx (HOx – VSx = 10V) 25 50 nS TPHSlh Prop delay (HS) low to high HSxON to HOx (HOx – VSx = 1V) 25 50 nS TPMMlshs Prop delay mismatch (ls to hs) LS off to HS on mismatch 10 40 nS TPMMhsls Prop delay mismatch (hs to ls) HS off to LS on mismatch 10 40 nS TPWmin Minimum pulse width response 80 nS Tr Rise time (HS/LS) 1nF load; 20 – 80% 20 nS Tp Fall time (HS/LS) 1nF load; 80 – 20% 20 nS V3P3 Regulator Vout Nominal Output voltage 3.15 3.3 3.45 V Iout External loading Output Current capability 10 15 mA Comparator Voffset Comparator Offset -10 0 10 mV VCMin Input Common Mode Range 0.2 1.8 V Tcomp Comparator detection time Input signal of 10mV 40 80 nS Amplifier Voffset Amplifier Offset -10 0 10 mV VCMin Input Common Mode Range 0.2 1.8 V AC gain 40 dB UGBW Unity gain bandwidth 5 MHz

• 7 - TS61001 Version 1.0 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2013, Triune Systems, LLC Triune Systems Proprietary and Confidential Information DO NOT DUPLICATE PACKAGE DIMENSIONS

• 8 - TS61001 Version 1.0 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2013, Triune Systems, LLC Triune Systems Proprietary and Confidential Information DO NOT DUPLICATE Legal Notices Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. “Typical” parameters whic h may be provided in Triune Systems data sheets and/or specifications can and do vary in different applic ations and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for your application by your technical experts. TRIUNE SYSTEMS MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIE D, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Triune Systems disclaims all liability arising from this information and its u se. Triune System products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Triune Systems product could create a situation where personal injury or death may occur. Should the Buyer purchase or use Triune Systems products for any such unintended or unauthorized application, the Buyer shall indemnify and hold Triune Systems, and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Triune Systems was negligent regarding the design or manufacture of the part. No licenses are conveyed, implicitly or otherwise, under any Triune Systems intellectual property rights. Trademarks All other trademarks mentioned herein are property of their respective companies. © 2013 Triune Systems, LLC. All Rights Reserved.