TS4148 ETC1

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

— For surface mounted application — Low forward voltage drop — High current capability — Fast switching for high efficiency — High surge current capability — Chip version in 1206 and 0805 — High temperature soldering: 250°C / 10 seconds at terminals Operating Temperature Range Storage Temperature Range °C-65 to +200 Voltage Range

100 Volts

0.3 Ampere

0.3 AMPS High Speed Switching Diode

— Case: 1206 or 0805 — Terminals: Tin plated — Polarity: Indicated by cathode arrow — Packaging: 8 mm tape per EIA STD RS-481 Dimensions in millimeters and (inches) Maximum Average Forward Rectified Current Resistive Load f > 50Hz Peak Forward Surge Current, Half Sine-wave Maximum Instantaneous Forward Voltage @ 10mA Maximum Instantaneous Reverse Current at Rated DC Blocking Voltage Reverse Recovery Time ( Note 1) Typical Junction Capacitance ( Note 2) Typical Thermal Resistance Junction to Ambient VRRM VR IF IF(AV) IFSM VF IR trr CJ Symbol TJ TSTG RTHJ-A mA A mA nA µA ns °C/W TS4148 100 150 -65 to +200 500 2.0 25.0 50.0 Notes: 1. Reverse Recovery Test Condition: I F = 10mA, VR = 6V, RL = 100 Ohm 2. Measured at 1 MHz and applied V R = 4.0V 4.0 pF TSC 1.0 4.0 300 Rev.1 06/2003 Item 1206 0805 L 3.20 + 0.20 (0.127 + 0.008) 2.00 + 0.20 (0.080 + 0.008) W 1.50 + 0.20 (0.062 + 0.008) 1.25 + 0.20 (0.050 + 0.008) T .085 + 0.10 (0.034 + 0.004) .085 + 0.10 (0.034 + 0.004) C 0.55 + 0.20 (0.022 + 0.008) 0.45 + 0.20 (0.018 + 0.008) 8.3 ms 1 µ S TJ=25°C, VR=20V TJ=125°C, VR=20V Power Dissipation PD 500 mW

Rev. 1 06/2003 Device has been marked indelibly and legibly As follow Package Name Packing Device Marking Packing TS4148 - 1206 - R7T4 Type - Size - Packing R7 7" (180mm) Reel 5,000 pcs/reel R13 13" (330mm) Reel 15,000 pcs/reel T4 4mm Pitch Paper Tape

Rev. 1 06/2003 Item Symbol Dimension Punch hole width 1206 Punch hole length 1206 Sprocket hole D 1.50+ 0.05 (0.060+0.002) Sprocket hole position E 1.75+ 0.10 (0.070+0.004) Punch hole position F 3.50+ 0.05 (0.140+0.002) Sprocket hole pitch P0 4.00+ 0.10 (0.160+0.004) Punch hole pitch P1 4.00+ 0.10 (0.160+0.004) Punch hole center P2 2.00+ 0.05 (0.080+0.002) Base tape width W0 8.00+ 0.20 (0.320+0.008) Top/Bottom seal tape width W1 5.25+ 0.05 (0.210+0.002) Base tape thickness T0 0.95+ 0.02 (0.038+0.0008) Top seal tape thickness T1 0.054+ 0.005 (0.002+0.0002) Bottom seal tape thickness T2 0.042+ 0.005 (0.0016+0.0002) Tape Specification