TP88 ETC2

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

Continuity for detecting open and shorts Frequency for "pulsed-DC" and AC tests Duty cycle to verify operation of feedback carburetors Diode test for alternator testing Built-in thermometer; thermocouple probe included Min/Max Recording Min/Max/Average recording with Min/Max Alert Peak capture to record transients as fast as 250 µs Relative mode to remove test lead resistance from low ohms measurements Millisecond pulse width measurements for fuel injectors AutoHOLD to capture stable readings Large display with bright, two-level backlight Magnet hanger to attach meter to the vehicle RPM80 Inductive Pickup for both conventional and distributorless (DIS) ignitions Hard Meter Case Safety rating Fluke 78 Fluke 88V Range Resolution Accuracy Range Resolution Accuracy 300V 0.1mV 0.3% 1000V 0.01mV 0.1% 300V 1mV 2.5% 1000V (5 kHz) 0.01mV 0.5% 10A1 mA 1% 10A 0.01µA 0.4% 10A 10mA 2 %1 0 A 0 . 0 1 µ A 1 . 2 % 40MΩ 0.1Ω 0.5% 40 Ω 0.01Ω 0.4% 10mF 0.01nF 1% 100kHz 0.01Hz 0.1% 200kHz 0.01Hz 0.01% 1000ºC 1ºC 1% 1090ºC 0.1ºC 1% Voltage DC Voltage AC Current DC Current AC Resistance Capacitance Frequency Temperature Specifications Battery Life: 88V – Over 400 hours typical (alkaline) 78 - 2000 hours typical Weight: 88V – 0.6 kg; 78 – 0.42 kg Lifetime Warranty Size (HxWxD): 88V - 200 mm x 95 mm x 48 mm 78 - 190 mm x 89 mm x 45 mm On all inputs Fluke 88 Fluke 88V 78 88 V/A optional Cat II 300 V CAT III 1000V, CAT IV 600 V The right meters for auto-electric diagnosis Fluke 78

TP81 and TP82 Insulation Piercing Clip Set

  • Banana jack accepts all DMM and banana jack leads
  • Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead
  • Available for 4 mm input, modular connection with TP81 or available as a 2 mm input to slip onto probe tips with the TP82
  • Tested to 60 V DC TP84 Oxygen Sensor Insulation Piercing Clip
  • Banana jack accepts all DMM and banana jack leads
  • Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead
  • Tested to 60 V DC TP88 Rigid Back Probe Pin Set
  • Slides onto test probes measuring 2 mm
  • Tested to 60 V DC
  • Banana jack accepts all DMM and banana jack leads
  • Tested to 60 V DC Kit contains:
  • TP81 Insulation Piercing Clip Set
  • TL224 SuregripTM Silicone Test Lead Set
  • TP220 SuregripTM Test Probe Set
  • AC220 SuregripTM Alligator Clip Set
  • AC285 SuregripTM Large Jaw Alligator Clip Set
  • Soft Case TLK282 SureGrip™ Deluxe Automotive Test Lead Kit Kit contains:
  • TP81 Insulation Piercing Clip Set
  • TP40 Automotive Back Probe Pins (five)
  • TL224 SuregripTM Silicone Test Lead Set
  • TP220 SuregripTM Test Probe Set
  • AC220 SuregripTM Alligator Clip Set
  • AC285 SuregripTM Large Jaw Alligator Clip Set
  • AC280 SuregripTM Hook Clip Set
  • Soft Case
  • Current Range: 2 to 600A DC or AC Peak
  • Basic Accuracy (DC to 400Hz): +/- (2% of reading + 1A)
  • Output Signal: 100A range: 10mV/A 600A range: 1mV/A
  • Frequency Range: 40Hz to 400Hz
  • Working Voltage: 600V AC rms
  • Maximum Conductor Diameter: 34 mm
  • Provides RPM readings Fluke Corporation P.O. Box 9090 Everett, WA USA 98206 Fluke Europe B.V. P.O. Box 1186

5602 BD Eindhoven

For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446 -5116 In Europe/M-East/Africa +31 (0)40 2 675 200 or Fax +31 (0)40 2 675 222 In Canada (905) 890-7600 or Fax (905) 890-6866 From other countries +1 (425) 446 -5500 or Fax +1 (425) 446 -5116 Visit us on the world wide web at: http://www.fluke.com Fluke (UK) Ltd.

52 Hurricane Way

Tel.: 0207 942 0700 Fax: 0207 942 0701 E-mail: industrial@uk.fluke.nl Fluke. Keeping your world up and running. TLK281 SureGrip™ Automotive Test Lead Kit RPM80 Inductive Pick-up TP40 Automotive Back Probe Pins (five) BP880 BNC to Female Double Stacking Banana Plug BP881 BNC to Male Double Stacking Banana Plug © Copyright 2004 Fluke Corporation. All rights reserved. Printed in the Netherlands 08/04 Data subject to alteration without notice. Pub_ID: 10761-eng BP880

  • Allows for hands-free testing in controlled voltage environments 500 VRMS maximum
  • Banana plug is nickel-plated, beryllium copper for low contact resistance
  • The BNC shell is plated for tarnish resistance
  • Operating temperature +50°C maximum TL28A Automotive Test Lead Set
  • Flexible silicone insulated leads are heat and cold resistant
  • Cat I 30 V, 10 A 90i-610s AC/DC Current Probe (600 A)
  • Compatible with all Fluke and most popular DMMs
  • Digital pressure and vacuum measurements in a single module
  • Transducer sealed in 316 stainless steel compatible with variety of liquids and gases
  • Measures vacuum to 76 cm Hg
  • Display results in English (psig or Hg) or metric (kPa or cm Hg) units
  • Measures pressure to 500 psig (3447 kPa) PV350 Pressure Vacuum Module BP881