TMXW341 TEMEX
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
SAW BPassband Filter - REMOTE CONTROL - RF Preliminary Specification (Rev-1)
SAW Passband Filter - REMOTE CONTROL - RF Preliminary Specification (Rev 1) May 10th, 2005 TEME X r eserves th e right to modify her ein spe cifications an d in form ations at any time when ne cessa ry to pr ovide optimum per form ance an d cost. Electrical Parameters Unit Minimum Typical (1) Maximum Source Impedance (single ended) Ω - 50(2) - Load Impedance (single ended) Ω - 50(2) - Center Frequency fo MHz - 869.6 - Absolute Attenuation 10 to 700 MHz dB 55 60 -
700 MHz to 843 MHz dB 40 45 -
843 MHz to 865.2 MHz dB 28 31 -
865.2 MHz to 867 MHz dB 15 22 -
871.7 MHz to 872.5 MHz dB 10 15 -
872.5 MHz to 880 MHz dB 11 16 -
880 MHz to 910 MHz dB 15 20 -
910 MHz to 1000 MHz dB 45 50 -
Minimum Insertion Loss within 869.2 MHz ~ 870.18 MHz dB - 3.0 4.7 Pass band (relative to ILmin) 869.2 MHz ~ 870.18 MHz 869.12 MHz ~ 870.26 MHz dB dB 1.0 1.5 3.0 6.0 Pass bandwidth (relative to ILmin) at 3 dB MHz - 1.85 - Package type & size Length x Width mm² - 5.0 x 5.0 - Height mm - 1.5 1.7 Pin Out Input 1 Output 5 Case Ground 4, 8 To Be Grounded 2, 3, 6, 7 Notes : (1) Typical values are nominal performances at room temperature (2) External matching circuit is required 50 Ω / 50 Ω CONFIGURATION Maximum Ratings Rating Unit Value Operating Temperature Range -45 to +90 °C Storage Temperature Range -45 to +90 °C DC permissive Voltage 0 V Maximum RF Power 0 dBm
SAW Passband Filter - REMOTE CONTROL - RF Preliminary Specification (Rev 1) May 10th, 2005 TEME X r eserves th e right to modify her ein spe cifications an d in form ations at any time when ne cessa ry to pr ovide optimum per form ance an d cost. TYPICAL S21 RESPONSE PACKAGE DRAWING