TMXW339 TEMEX
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
SAW Passband Filter – REMOTE CONTROL – RF Preliminary Specification (Rev-1)
SAW Passband Filter - REMOTE CONTROL - RF Preliminary Specification (Rev 1) May 10th, 2005 TEME X r eserves th e right to modify her ein spe cifications an d in form ations at any time when ne cessa ry to pr ovide optimum per form ance an d cost. Electrical Parameters Unit Minimum Typical (1) Maximum Source Impedance (single ended) Ω - 50(2) - Load Impedance (single ended) Ω - 50(2) - Center Frequency fo MHz - 866 - Absolute Attenuation
770 MHz to 780 MHz dB 40 49 -
815 MHz to 825 MHz dB 40 49 -
837.5 MHz to 847.5 MHz dB 30 38 Insertion Loss within 862 MHz ~ 870 MHz dB - 3.0 4.5 Ripple within 862 MHz ~ 870 MHz dB - 0.8 2.1 Package type & size Length x Width mm² - 3.0 x 3.0 - Height Mm - 1.2 1.4 Pin Out Input 2 Output 6 Case Ground 1, 3, 4, 5, 7, 8 To Be Grounded 1, 3, 4, 5, 7, 8 Notes : (1) Typical values are nominal performances at room temperature (2) No external matching circuit is required 50 Ω / 50 Ω CONFIGURATION Input 50 Ω Single Output 50 Ω Single GND Maximum Ratings Rating Unit Value Operating Temperature Range -10 to +60 °C Storage Temperature Range -40 to +85 °C DC permissive Voltage 3 V Maximum RF Power 10 dBm
SAW Passband Filter - REMOTE CONTROL - RF Preliminary Specification (Rev 1) May 10th, 2005 TEME X r eserves th e right to modify her ein spe cifications an d in form ations at any time when ne cessa ry to pr ovide optimum per form ance an d cost. TYPICAL S21 RESPONSE PACKAGE DRAWING