TMXW306 TEMEX
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
SAW Passband Filter - Remote Control - RF Preliminary Specification (Rev-1)
SAW PASSBAND Filter – Remote Control - RF Specification (Rev 1) March 17th, 2005 TEME X r eserves th e right to modify her ein spe cifications an d in form ations at any time when ne cessa ry to pr ovide optimum per form ance an d cost. Electrical Parameters Unit Minimum Typical (1) Maximum Source Impedance (single ended) Ω - 50(2) - Load Impedance (single ended) Ω - 50(2) - Center Frequency fo MHz - 916 - Absolute Attenuation
20 MHz to 850 MHz dB 50 55 -
850 MHz to 900 MHz dB 40 45 -
900 MHz to 902 MHz dB 35 40 -
929 MHz to 933 MHz dB 25 30 -
950 MHz to 1000 MHz dB 40 50 -
1000 MHz to 1500 MHz dB 40 45 -
Maximum Insertion Loss in 915 MHz-917 MHz dB - 2.8 4.0 Ripple in 915 MHz-917 MHz dB - 0.2 1.0 Package type & size Length x Width mm² - 3.0 x 3.0 - Height mm - 1.3 1.35 Pin Out Input 1 Output 2 Case Ground 3 To Be Grounded 3 Notes : (1) Typical values are nominal performances at room temperature (2) No external matching circuit is required 50 Ω / 50 Ω CONFIGURATION Input 50 Ω Single Output 50 Ω Single GND Maximum Ratings Rating Unit Value Operating Temperature Range TA -20 to +50 °C Storage Temperature Range -40 to +85 °C Input Power 15 dBm
SAW PASSBAND Filter – Remote Control - RF Specification (Rev 1) March 17th, 2005 TEME X r eserves th e right to modify her ein spe cifications an d in form ations at any time when ne cessa ry to pr ovide optimum per form ance an d cost. TYPICAL S21 RESPONSE 880 900 920 940 960 -80 -70 -60 -50 -40 -30 -20 -10 References Scales CENTER FREQUENCY = 0 MHz SCALE_FREQUENCY = 10 MHz/div LOSS REFERENCE = 0 dB DELAY REFERENCE = 0 µs PHASE REFERENCE = 0 deg PACKAGE DRAWING