TM035KDH03 Datasheet | DigiCamel IC Datasheet

Manufacturer Specifications

Compare TM035KDH03 variants.

Select a manufacturer to view its specifications, local PDF, and searchable HTML text.

2 manufacturers / 2 documents

Manufacturer	Series	Package	Documents	Available	Select specification
GSR Technology Ltd	-	-	1	PDF HTML	View spec
List of Unclassifed Man...	-	-	1	PDF HTML	Viewing

Online Datasheet

Read the List of Unclassifed Man... document online.

DATASHEET SEARCH SITE

Document overview

Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 25

Technical content

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 2 of 25 Table of Contents

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 3 of 25 Record of Revision Rev Issued Date Description Editor 1.0 2008-10-21 Preliminary release. Lei Peng 1.0 2008-12-11 Final release. Lei Peng 1.1 2009-2-24 Update the Characteristics Data. ChenYanguang 1.2 2009-04-13 Modify the chromaticity Yan Song

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 4 of 25

1 General Specifications

Size 3.5inch Resolution 320(RGB) X 240 Interface RGB/CCIR656/601 Color Depth 24bit Technology Type a-Si Pixel Pitch (mm) 0.219 x 0.219 Display Colors 16.7M Dithering Pixel Configuration R.G.B. Vertical Stripe Display Mode TM with Normally White Surface Treatment Clear Type. 3H Viewing Direction 12 o’clock Display Spec. Gray Scale Inversion Direction 6 o’clock LCM (W x H x D) (mm) 76.9 x 63.9 x 3.15 Active Area(mm) 70.08 x 52.56 With /Without TSP Without TSP Weight (g) 29.3 LED Numbers 6 LEDs Serial Mechanical Characteristics Driver IC Novatek NT39016D Note 1: Viewing direction for best image quality is different from TFT definition, there is a 180 degree shift. Note 2: Requirements on Environmental Protection: RoHS Note 3: LCM weight tolerance: ± 5%

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 5 of 25

2 Input/Output Terminals

2.1 TFT LCD Panel Matching connector of Hirose H23-45S-0.3SHW No Symbol I/O Description Remark

1 LED_Cathode P LED_Cathode Note2-1

2 LED_Cathode P LED_Cathode

3 LED_Anode P LED_Anode

4 LED_Anode P LED_Anode

5 NC - No Connect

6 NC - No Connect

7 NC - No Connect

8 RESET I Reset

9 SPENA I Serial port data enable signal

10 SPCK I SPI Serial Clock

11 SPDA I/O SPI Serial Data Input/output

12 D00 I Data 00 Note 2-2

13 D01 I Data 01 Note 2-2

14 D02 I Data 02 Note 2-2

15 D03 I Data 03 Note 2-2

16 D04 I Data 04 Note 2-2

17 D05 I Data 05 Note 2-2

18 D06 I Data 06 Note 2-2

19 D07 I Data 07 Note 2-2

20 D08 I Data 08 Note 2-2

21 D09 I Data 09 Note 2-2

22 D10 I Data 10 Note 2-2

23 D11 I Data 11 Note 2-2

24 D12 I Data 12 Note 2-2

25 D13 I Data 13 Note 2-2

26 D14 I Data 14 Note 2-2

27 D15 I Data 15 Note 2-2

28 D16 I Data 16 Note 2-2

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 6 of 25

29 D17 I Data 17 Note 2-2

30 D18 I Data 18 Note 2-2

31 D19 I Data 19 Note 2-2

32 D20 I Data 20 Note 2-2

33 D21 I Data 21 Note 2-2

34 D22 I Data 22 Note 2-2

35 D23 I Data 23 Note 2-2

36 HSYNC I Horizontal Synchronous Signal

37 VSYNC I Vertical Synchronous Signal

38 CLK I Data Clock

39 NC - No Connect

40 NC - No Connect

41 VDD P Power Supply（3.3V） 42 VDD P Power Supply（3.3V）

43 NC - No Connect

44 NC - No Connect

45 NC - No Connect

46 NC - No Connect

47 NC - No Connect

48 NC - No Connect

49 NC - No Connect

50 NC - No Connect

51 NC - No Connect

52 DEN I Data Enabling Signal

53 GND P Ground

54 GND P Ground

Note2-1: I/O definition: I----Input O----Output P----Power/Ground

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 7 of 25 Note2-2: Mode D(23:16) D(15:08) D(07:00) HSYNC VSYNC DEN ITU-R BT 656 D(23:16) GND GND NC NC NC ITU-R BT 601 D(23:16) GND GND HSYNC VSYNC NC NC for HV Mode 8 Bit RGB D(23:16) GND GND HSYNC VSYNC DEN for Den Mode NC for HV Mode 24 Bit RGB R(7:0) G(7:0) B(7:0) HSYNC VSYNC DEN for Den Mode

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 8 of 25

3 Absolute Maximum Ratings

3.1 Driving TFT LCD Panel T a = 2 5 ℃

Item Symbol MIN MAX Unit Remark Supply Voltage VDD -0.3 5.0 V Operating Temperature TOPR -20 60 ℃ Storage Temperature TSTG -30 70 ℃

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2

4 Electrical Characteristics

4.1 Driving TFT LCD Panel GND=0V, Ta=25℃

Item Symbol MIN TYP MAX Unit Remark Supply Voltage VDD 3.0 3.3 3.6 V Low Level VIL GND - 0.3xVDD V Input Signal Voltage High Level VIH 0.7xVDD - VDD V Full Mode - 35 50 mW The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 9 of 25 (60HZ) Power Consumption (Panel+LSI) Stand-by Mode - 0.12 0.17 mW

4.2 Driving Backlight

Ta=25℃ Item Symbol MIN TYP MAX Unit Remark Forward Current IF -- 20 25 mA Forward Current Voltage VF 16.8 19.2 21.6 V Backlight Power Consumption WBL -- 384 510 mW Note 1: The figure below shows the connection of backlight LED. LED_CathodeLED_Anode Note 2: Each LED : IF =20 mA, V =3.2V Note 3: The minimal life of LED : 20,000 hours

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2

4.3 Block Diagram

LCD Driver Chip (COG) SPI Signal Grayscale Manipulation Voltage TCON D00~D23, HSYNC, VSYNC CLK，DEN SPENA, SPCK, SPDA POWER SUPPLY VDD B/L RGB ITU-R BT 601/656 Charge pump VCOM LED_Anode, LED_Cathode FPC RESET RESET Signal B/L The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 10 of 25

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2

5 Timing Chart

5.1 Timing Parameter

5.1.1 AC Electrical Characteristics (VDD=3.3V, GND= 0V,Ta=25 )℃ Parameter Symbol Min. Typ. Max. Unit Conditions CLK Clock Time Tclk - - 35.7 ns CLK=28MHz CLK Pulse Duty Tchw 40 50 60 % Tclk HSYNC to CLK Thc - - 1 CLK HSYNC Width Thwh 1 - - CLK VSYNC Width Tvwh 1 - - Th HSYNC Period Time Th 60.00 63.56 67.00 us VSYNC SetupTime Tvst 12 - - ns VSYNC Hold Time Tvhd 12 - - ns HSYNC Setup Time Thst 12 - - ns HSYNC Hold Time Thhd 12 - - ns Data Set-up Time Tdsu 12 - - ns D[23:00] to CLK Data Hold Time Tdhd 12 - - ns D[23:00] to CLK DEN Setup Time Tesd 12 - - ns DEN to CLK The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 11 of 25

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 5.2 24 bit RGB mode for 320RGB x 240 Parameter Symbol Min. Typ. Max. Unit Conditions CLK Frequency Fclk - 6.4 - MHz VDD=3.0~3.6V CLK Cycle Time Tclk - 156 - ns Time that HSYNC to 1’st Data Input(NTSC) The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 12 of 25 Ths 40 70 255 CLK Default=13 lines Display lines = 240 lines Total lines = 263 lines 1312 1 4 253 254 1 2 12 7 0 71 R R RRRR GG GGGG BB BBBB Default Ths = 70 Active Area = 320RGB Total Area = 408 CLK HSYNC VSYNC HSYNC CLK DEN R G B R G B D23~D16 D15~D08 D07~D00

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 5.3 8 bit RGB mode for 320RGB x 240 Parameter Symbol Min. Typ. Max. Unit Conditions CLK frequency Fclk - 27 - MHz VDD=3.0~3.6V CLK cycle time Tclk - 37 - ns Time that HSYNC to 1’st data input(NTSC) Ths 35 70 255 CLK

5.4 ITU-R BT 601

Parameter Symbol Min. Typ. Max. Unit Conditions CLK frequency Fclk - 24.54/27.00 - MHz VDD=3.0~3.6V CLK cycle time Tclk - 40/37 - ns Time that HSYNC to 1’st data input(PAL) Ths 128 264 - CLK Time that HSYNC to 1’st data input(NTSC) Ths 128 244 - CLK The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 13 of 25

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2

5.5 ITU-R BT 656

Parameter Symbol Min. Typ. Max. Unit Conditions CLK frequency Fclk - 27 - MHz VDD=3.0~3.6V CLK cycle time Tclk - 37 - ns Time that EVA to 1’st data input(PAL) Ths 128 288 - CLK Time that EVA to 1’st data input(NTSC) Ths 128 276 - CLK 5.6 3-wire serial communication AC timing Parameter Symbol Min. Typ. Max. Unit Conditions Serial Clock Tspck 320 - - ns SPCK Pulse Duty Tscdut 40 50 60 % Serial Data Setup Time Tisu 120 - - ns Serial Data Hold Time Tihd 120 - - ns Serial Clock High/low Tssw 120 - - ns Chip Select Distinguish Tcd 1 - - us The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 14 of 25

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 15 of 25 5.7 3-Wire Control Registers List 3-Wire Register Register Description D[15:8] Name Init R/W Function Description 000000b R00 07h R/W System control register 000001b R01 00h R/W Timing Controller function register 000010b R02 03h R/W Operation control register 000011b R03 CCh R/W Input data Format control register 000100b R04 46h R/W Source Timing delay control register 000101b R05 0Dh R/W Gate Timing delay control register 000110b R06 00h R/W Reserved 000111b R07 00h R/W Internal function control register 001000b R08 08h R/W RGB Contrast control register 001001b R09 40h R/W RGB Brightness control register 001010b R0A 88h R/W Hue / Saturation control register 001011b R0B 88h R/W R / B Sub-Contrast control register 001100b R0C 20h R/W R Sub-Brightness control register 001101b R0D 20h R/W B Sub-Brightness control register 001110b R0E 68h R/W VCOMDC Level Control Register 001111b R0F A4h R/W VCOMAC Level Control Register 010000b R10 04h R/W VGAM2 level control register 010001b R11 24h R/W VGAM3/4 level control register 010010b R12 24h R/W VGAM5/6 level control register 011110b R1E 00h R/W VCOMDC Trim function control register 100000b R20 00h R/W Wide and narrow display mode control register Note : R03: c4h:ITU-R BT 656 Mode c2h:ITU-R BT 601 Mode c8h:8 bit RGB Mode(HV Mode) c9h:8 bit RGB Mode(DE Mode) cch(default):24 bit RGB Mode (HV mode) cdh:24 bit RGB Mode (DE mode)

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2

5.8 Power on sequence

5.9 Power off sequence

The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 16 of 25

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 17 of 25

6 Optical Characteristics

6.1 Optical Specification

T a = 2 5 ℃ Item Symbol Condition Min Typ. Max. Unit Remark θT 30 40 - θB 50 60 - θL 50 60 - View Angles θR CR≧10 50 60 - Degree Note 2 Contrast Ratio CR θ=0° 200 350 - Note1 Note3 TON Response Time TOFF 25℃ - 25 40 ms Note1 Note4 x 0.240 0.290 0.340 White y 0.250 0.300 0.350 x 0.525 0.575 0.625 RED y 0.270 0.320 0.370 x 0.300 0.350 0.400 GREEN y 0.500 0.550 0.600 x 0.095 0.145 0.195 Chromaticity BLUE y Backlight is on 0.035 0.085 0.135 Note5, Note1 Uniformity U 75 80 - % Note1 Note6 NTSC - 50 - % Note 5 Luminance L 240 300 - cd/m2 Note1 Note7 Test Conditions: 1. V F =19.2V, IF =20mA(LED current), the ambient temperature is 25 .℃ 2. The test systems refer to Note 1 and Note2.

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 Note 1: Definition of optical measurement system. The optical characteristics should be measured in dark room. After 5 minutes operation, the optical properties are measured at the center point of the LCD screen. All input terminals LCD panel must be ground when measuring the center area of the panel. The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 18 of 25 Note 2: Definition of viewing angle range and measurement system. viewing angle is measured at the center point of the LCD by CONOSCOPE(ergo-80)。 Fig. 1 Definition of viewing angle Item Photo Detector Field Contrast Ratio Luminance Chromaticity Lum Uniformity SR-3A 1° Response Time BM-7A 2° Photo detector Field 500mm LCD PanelTFT-LCD Module The center of the screen

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 Note 3: Definition of contrast ratio “White state “:The state is that the LCD should driven by Vwhite. “Black state”: The state is that the LCD should driven by Vblack. Vwhite: To be determined Vblack: To be determined. Note 4: Definition of Response time The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%. Note 5: Definition of color chromaticity (CIE1931) Color coordinates measured at center point of LCD. The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 19 of 25

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 Note 6: Definition of Luminance Uniformity Active area is divided into 9 measuring areas (Refer Fig. 2). Every measuring point is placed at the center of each measuring area. Luminance Uniformity(U) = Lmin/ Lmax F i g . 2 D e f i n i t i o n o f u n i f o r m i t y Lmax: The measured maximum luminance of all measurement position. Lmin: The measured minimum luminance of all measurement position. Note 7: Definition of Luminance : Measure the luminance of white state at center point. The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 20 of 25

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 21 of 25

7 Environmental / Reliability Tests

No Test Item Condition Remark High Temperature Operation Ts=+60℃,240hrs Note1 IEC60068-2-2,GB2423.2—89

2 Low Temperature

Operation Ta=-20℃,240hrs Note 2, IEC60068-2-1 GB2423.1—89 High Temperature Storage Ta=+70℃,240hrs IEC60068-2-2, GB2423.2—89

4 Low Temperature

Storage Ta=-30℃,240hrs IEC60068-2-1 GB2423.1—89 High Temperature & High Humidity Storage +60℃,90% RH max,160 hours IEC60068-2-3, GB/T2423.3—2006

6 Thermal Shock

(Non-operation) -30 30 min~+℃ 70 30 min,℃ Change time:5min,30 Cycle. Start with cold temperature, end with high temperature IEC60068-2-14,GB2423.22—87 Electro Static Discharge (Operation) C=150pF, R=330Ω，5points/panel Air:±8KV,5times;Contact:±4KV,5times; （ Environment:15℃ ～ 35℃,30% ～ 60%,86Kpa～106Kpa） IEC61000-4-2 GB/T17626.2—1998

8 Vibration

(Non-operation) Frequency range:10~55Hz,Stroke:1.5mm Sweep:10Hz~55Hz~10Hz 2 hours for each direction of X.Y .Z.(package condition) IEC60068-2-6 GB/T2423.10—1995

9 Shock

(Non-operation) 60G 6ms, ± X,± Y,± Z 3times for each direction IEC60068-2-27 GB/T2423.5—1995 Drop Test Height:80 cm,1 corner, 3 edges, 6 surfaces IEC60068-2-32 GB/T2423.8—1995 Note1: Ts is the temperature of panel’s surface. Note2: Ta is the ambient temperature of sample.

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2

8 Mechanical Drawing

The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 22 of 25

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2

9 Packing drawing

LCM quantity per Partition: 3rows x 28 pcs = 84 pcs Total quantity in carton: 2 layers x 84 pcs per partition= 168 pc The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 23 of 25 邮编：201201 華硊: 中国上海浦东新区龙东大道6101号華硊: 中国上海浦东新区龙东大道6101号邮编：201201 Anti_Static_BagLCM 2*3tier*5tie Carton/168p 5

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 24 of 25 Per carton: No Item Model (Material) Dimensions(mm) Unit Weight(Kg) Quantity Remark 1 LCM module TM035KDH03 76.90 x 63.90 x 3.15 0.03 168

2 Partition_1 Corrugated

Paper 513 x333 x 106 0.782 2 3. Anti-Static Bag PE 155 x 85 x 0.05 0.003 168 Anti-static

4 Dust-Proof

5 Partition_2 Corrugated

Paper 505 x 332 x 4.00 0.095 3

6 Corrugated

Paper 513 x 117 x 4 0.032 12

7 Carton Corrugated

Paper 530 x 350 x 250 1.1000 1 8 Total weight 8.937±5%

SHANGHAI TIANMA MICRO-ELECTRONICS T M 0 3 5 K D H 0 3 V 1 . 2 The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 25 of 25

10 Precautions for Use of LCD Modules

10.1 Handling Precautions

10.1.1. The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. 10.1.2. If the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 10.1.3. Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. 10.1.4. The polarizer covering the display surface of the LCD module is soft and easily scratched. Handle this polarizer carefully. 10.1.5. If the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If still not completely clear, moisten cloth with one of the following solvents: － Isopropyl alcohol － Ethyl alcohol Solvents other than those mentioned above may damage the polarizer. Especially, do not use the following: － Water － Ketone － Aromatic solvents 10.1.6. Do not attempt to disassemble the LCD Module. 10.1.7. If the logic circuit power is off, do not apply the input signals. 10.1.8. To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. 10.1.8.3. To reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions. peeling off this protective film since static electricity may be generated.

10.2 Storage Precautions

10.2.1. When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. 10.2.2. The LCD modules should be stored under the storage temperature range. If the LCD modules will be stored for a long time, the recommend condition is: Temperature : 0℃ ～ 40℃ R e l a t i v e l y h u m i d i t y : ≤80% 10.2.3. The LCD modules should be stored in the room without acid, alkali and harmful gas.

10.3 Transportation Precautions

The LCD modules should be no falling and violent shocking during transportation, and also should avoid excessive press, water, damp and sunshine.

Selected Specification

List of Unclassifed Man... TM035KDH03 overview.

Change manufacturer

Summary

SHANGHAL TIANMA MICRO-ELECTRONICS

Description

SHANGHAL TIANMA MICRO-ELECTRONICS

Source title TM035KDH03 Datasheet(PDF) - List of Unclassifed Manufacturers

Related Parts

More parts from the same family.

Browse manufacturer