TG090113 ETC2
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
SPE-11-8-032/F/SS | page 1 of 16 TG.09.0113 Specification Part No. TG.09.0113 Product Name Penta-band Cellular Hinged SMA Male Monopole Feature 800 MHz to 2200MHz GSM/CDMA/HSPA/UMTS Rotatable hinge design for optimal reception Top quality housing with brass hinge and connector Extended operation temperature range RoHS Compliant This drawing and its inherent design concepts are property of Taoglas. Not to be copied or given to third parties without the written consent of Taoglas. TW Design Centre ALL Initial Design Jason 2011/6/15A ALL Add 3D View Jason 2011/8/1B 3D View Name Material Finish QTY Housing SMA(M) ST POM Black Ni Plated Ni Plated Black Hinge Brass POM Brass Cap Pin A2 Amend Typo Kiwi 2011/10/5C C
SPE-11-8-032/F/SS | page 2 of 16 The TG.09 Penta-band Cellular Hinged Rotatable SMA antenna is a high efficiency monopole antenna. Compared to other much larger antennas on the market, it has superior wide-band high efficiency characteristics. This antenna is used by many of the leading wireless device providers in the world marketplace. The unique rotatable hinge design enables the user to rotate the antenna to the best angle for an optimal cellular signal reception. As the upper antenna element can move in any direction, it also reduces damage from impact force from any angle to the antenna, compared to traditional hinged right angle or fixed fight angle designs or straight antennas. The tiny dimensions of this antenna coupled with excellent RF performance and an aesthetic high end design feel make it the ideal cellular antenna for routers, vehicle tracking devices, telematics devices, remote monitoring systems, POS devices. The TG.09 as all monopole antennas works best connected directly to the ground-plane of the device main-board. Taoglas offers support services to characterize antenna efficiency on your individual device ground-plane. Please contact Taoglas regional support centre first if you wish to do PTCRB or network approvals with this antenna attached to your device, so we can check RF integration is correct and do a pre-test first to ensure optimized passive and active performance and a smooth and quick certification approval process. This antenna also comes in a white version. TG.09.0113W If your device does not have a direct connection to ground-plane, please consider using our TG.30 Apex Wideband Dipole Cellular Antenna, which does not need a ground-plane to connect to. 1. Introduction
SPE-11-8-032/F/SS | page 3 of 16 2. Specification * Average efficiency and peak gain of antenna sitting 180º in free space and mounted at the side of the PCB. Please refer to section IV for testing detail. Electrical Penta-band Cellular Communication System AMPS GSM DCS PCS UMTS Frequency 824 ~ 896 880 ~ 960 1710 ~ 1880 1850 ~ 1990 1710 ~ 2170 Efficiency (free space)* 21% 24% 23% 32% 31% Efficiency (mounted on PCB)* 39% 31% 78% 75% 75% Impedance 50Ω Polarization Linear Radiation Pattern Omni-directional Input Power 10 W Mechanical Antenna Length 72 ± 1.5 mm Antenna Diameter 10 ± 0.3 mm Casing POM Connector SMA Male (Brass) Environmental Temperature Range -40°C to 85°C Storage Temperature -40℃ ~ +105℃ Humidity Non-condensing 65°C 95% RH
-10 -15 -20 -25 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz) TG.09 Return Loss TG.09 tested with Agilent 8753ES straight bend SPE-11-8-032/F/SS | page 4 of 16 Return Loss measure the amount of signal energy that is reflected back to the system (the network analyzer) due to impedance mismatch between the 50ohm network analyzer and the antenna. -3dBi means half of the energy is reflected back and -10dBi means 10% of energy is reflected back to the system. 3. Electrical Property – Return Loss SPE-11-8-032/F/SS Page 4 of 17 3. Electrical Property – Return Loss Return Loss measure the amount of signal energy that is reflected back to the system (the network analyzer) due to impedance mismatch between the 50ohm network analyzer and the antenna. -3dBi means half of the energy is reflected back and -10dBi means 10% of energy is reflected back to the system. TG.09 Return Loss -25 -20 -15 -10 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz) straight bend TG.09 tested with Agilent 8753ES
SPE-11-8-032/F/SS | page 5 of 16 4. Electrical Property – Efficiency Antenna normally behaves differently when mounting on a different environment. So we test the antenna in four different settings – a) free space b) on top of a 150 x 90mm ground plane. (A common ground plane size for electronic device) c) on the edge of a 150 x 90mm ground plane. (Another common way of mounting antenna) d) 450 x 350 ground plane. This simulates the situation of mounting TG.09 on top of a large metal object, such as a vehicle. TG.09 can be installed in 5 different angles so we present the test in different combination of angles and mounting environment. SPE-11-8-032/F/SS Page 5 of 17 4. Electrical Property – Efficiency Antenna normally behaves differently when mounting on a different environment. So we test the antenna in four different settings – a. free space b. on top of a 150 x 90mm ground plane.(A common ground plane size for electronic device) c. on the edge of a 150 x 90mm ground plane. (Another common way of mounting antenna) d. 450 x 350 ground plane. This simulates the situation of mounting TG.09 on top of a large metal object, such as a vehicle. TG.09 can be installed in 5 different angles so we present the test in different combination of angles and mounting environment. 1. free space 2. PCB size ground plane 3. mounting upright 4. metal plane SPE-11-8-032/F/SS Page 5 of 17 4. Electrical Property – Efficiency Antenna normally behaves differently when mounting on a different environment. So we test the antenna in four different settings – a. free space b. on top of a 150 x 90mm ground plane.(A common ground plane size for electronic device) c. on the edge of a 150 x 90mm ground plane. (Another common way of mounting antenna) d. 450 x 350 ground plane. This simulates the situation of mounting TG.09 on top of a large metal object, such as a vehicle. TG.09 can be installed in 5 different angles so we present the test in different combination of angles and mounting environment. 1. free space 2. PCB size ground plane 3. mounting upright 4. metal plane SPE-11-8-032/F/SS Page 5 of 17 4. Electrical Property – Efficiency Antenna normally behaves differently when mounting on a different environment. So we test the antenna in four different settings – a. free space b. on top of a 150 x 90mm ground plane.(A common ground plane size for electronic device) c. on the edge of a 150 x 90mm ground plane. (Another common way of mounting antenna) d. 450 x 350 ground plane. This simulates the situation of mounting TG.09 on top of a large metal object, such as a vehicle. TG.09 can be installed in 5 different angles so we present the test in different combination of angles and mounting environment. 1. free space 2. PCB size ground plane 3. mounting upright 4. metal plane SPE-11-8-032/F/SS Page 5 of 17 4. Electrical Property – Efficiency Antenna normally behaves differently when mounting on a different environment. So we test the antenna in four different settings – a. free space b. on top of a 150 x 90mm ground plane.(A common ground plane size for electronic device) c. on the edge of a 150 x 90mm ground plane. (Another common way of mounting antenna) d. 450 x 350 ground plane. This simulates the situation of mounting TG.09 on top of a large metal object, such as a vehicle. TG.09 can be installed in 5 different angles so we present the test in different combination of angles and mounting environment. 1. free space 2. PCB size ground plane 3. mounting upright 4. metal plane 1. Free Space 3. Mounting Upright 2. PCB Size Ground Plane 4. Metal Plane SPE-11-8-032/F/SS Page 6 of 17 TG.09 on top of a 150x90mm PCB. ψis the horizontal rotation and θ is the vertical position of TG.09 with respect to the 3D chamber. In the Satimo chamber, ψ= 0 is the x-axial, ψ= 90o is the y-axial and θ=180o is the z-axial. ψ θ θ= 90o = θ= 270o ψ=90o ψ =180o ψ= 0o TG.09 on top of a 150 x 90mm PCB. Ø is the horizontal rotation and 0 is the vertical position of TG.09 with respect to the 3D chamber. In the Satimo chamber, Ø = 0 is the x-axial, Ø = 90º is the y-axial and 0 =180º is the z-axial.
SPE-11-8-032/F/SS | page 6 of 16 4.1 TG.09 on Different Mounting Condition Here we compare TG.09 in its most common installation angles (90º and 180º) with different mounting environments. Antenna in straight position (180º) on different mounting condition. SPE-11-8-032/F/SS Page 7 of 17 4.1 TG.09 on Different Mounting Condition Here we compare TG.09 in its most common installation angles (90o and 180o) with different mounting environments. Radiation efficiency -- TG.09 180 degree 10% 20% 30% 40% 50% 60% 70% 80% 90% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz) pcb 180 metal 180 upright 180 freespace 180 Antenna in straight position (180o) on different mounting condition. Radiation efficiency - TG.09 180 degree 90% 80% 70% 60% 50% 40% 30% 20% 10% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz)
SPE-11-8-032/F/SS | page 7 of 16 Antenna in right angle position (90º) on different mounting condition. TG.09 is a monopole antenna. It works better with the present of a ground plane. The size of the ground plane does not affect the radiation efficiency much as long as it is greater than 1/4 wavelength (1/4 wavelength for 824MHz is 91mm). Radiation efficiency - TG.09 90 degree 4.1 TG.09 on Different Mounting Condition SPE-11-8-032/F/SS Page 8 of 17 Radiation efficiency -- TG.09 90 degree 10% 20% 30% 40% 50% 60% 70% 80% 90% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz) pcb 90 metal 90 upright 90 freespace 90 Antenna in right angle position (90o) on different mounting condition. TG.09 is a monopole antenna. It works better with the present of a ground plane. The size of the ground plane does not affect the radiation efficiency much as long as it is greater than 1/4 wavelength (1/4 wavelength for 824MHz is 91mm). 90% 80% 70% 60% 50% 40% 30% 20% 10% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz)
SPE-11-8-032/F/SS | page 8 of 16 4.2 TG.09 - Different Rotation Angle TG.09 has 5 different locking 0 angle and is free to mount at any angle around Ø. Different position of antenna with respect to the ground has different antenna radiation. We tested TG.09 in three common situation of antenna mounting. SPE-11-8-032/F/SS Page 9 of 17 4.2 TG.09 - Different Rotation Angle TG.09 has 5 different lockingθ angle and is free to mount at any angle aroundψ. Different position of antenna with respect to the ground has different antenna radiation. We tested TG.09 in three common situation of antenna mounting. Different antenna mounting is marked as (ψangle--θangel ), photos are two example of the position marking. TG.09 mounted on PCB ground 10% 20% 30% 40% 50% 60% 70% 80% 90% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz) 180 0-90 0-135 315-90 315-135 270-90 270-135 225-90 225-135 0 - 135 270 - 90 SPE-11-8-032/F/SS Page 9 of 17 4.2 TG.09 - Different Rotation Angle TG.09 has 5 different lockingθ angle and is free to mount at any angle aroundψ. Different position of antenna with respect to the ground has different antenna radiation. We tested TG.09 in three common situation of antenna mounting. Different antenna mounting is marked as (ψangle--θangel ), photos are two example of the position marking. TG.09 mounted on PCB ground 10% 20% 30% 40% 50% 60% 70% 80% 90% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz) 180 0-90 0-135 315-90 315-135 270-90 270-135 225-90 225-135 0 - 135 270 - 90 Different antenna mounting is marked as (Ø angle--0 angle ), photos are two example of the position marking. 90% 80% 70% 60% 50% 40% 30% 20% 10% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz) TG.09 mounted on PCB ground
SPE-11-8-032/F/SS | page 9 of 16 SPE-11-8-032/F/SS Page 10 of 17 Example of upright mounting. TG.09 mounted at the edge of PCB (upright position) 10% 20% 30% 40% 50% 60% 70% 80% 90% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz) 180 315-90 315-135 270-90 270-135 225-90 225-135 180-90 180-135 0 - 90 90 - 135 Example of upright mounting. SPE-11-8-032/F/SS Page 10 of 17 Example of upright mounting. TG.09 mounted at the edge of PCB (upright position) 10% 20% 30% 40% 50% 60% 70% 80% 90% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz) 180 315-90 315-135 270-90 270-135 225-90 225-135 180-90 180-135 0 - 90 90 - 135 4.2 TG.09 - Different Rotation Angle TG.09 mounted at the edge of PCB (upright position) 90% 80% 70% 60% 50% 40% 30% 20% 10% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz)
SPE-11-8-032/F/SS | page 10 of 16 SPE-11-8-032/F/SS Page 11 of 17 Example of TG.09 mounting on metal plane. TG.09 mounted on metal plane 10% 20% 30% 40% 50% 60% 70% 80% 90% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz) 0-90 0-135 180 Different ground plane let TG.09 have very different efficiency distribution. Different TG.09 rotation for any given mounting ground has up to 20% efficiency different for each frequency, but has similar efficiency distribution. 0 - 135 Example of TG.09 mounting on metal plane. SPE-11-8-032/F/SS Page 11 of 17 Example of TG.09 mounting on metal plane. TG.09 mounted on metal plane 10% 20% 30% 40% 50% 60% 70% 80% 90% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz) 0-90 0-135 180 Different ground plane let TG.09 have very different efficiency distribution. Different TG.09 rotation for any given mounting ground has up to 20% efficiency different for each frequency, but has similar efficiency distribution. 0 - 135 Different ground plane let TG.09 have very different efficiency distribution. Different TG.09 rotation for any given mounting ground has up to 20% efficiency different for each frequency, but has similar efficiency distribution. 90% 80% 70% 60% 50% 40% 30% 20% 10% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (MHz) TG.09 mounted on metal plane
SPE-11-8-032/F/SS | page 11 of 16 5. Radiation Pattern SPE-11-8-032/F/SS Page 12 of 17 5. Radiation Pattern 5.1 TG.09 in Free Space Vertical Horizontal TG.09 180o in free space -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2100MHz TG.09 90o in free space -35 -30 -25 -20 -15 -10 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2100MHz SPE-11-8-032/F/SS Page 12 of 17 5. Radiation Pattern 5.1 TG.09 in Free Space Vertical Horizontal TG.09 180o in free space -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2100MHz TG.09 90o in free space -35 -30 -25 -20 -15 -10 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2100MHz SPE-11-8-032/F/SS Page 12 of 17 5. Radiation Pattern 5.1 TG.09 in Free Space Vertical Horizontal TG.09 180o in free space -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2100MHz TG.09 90o in free space -35 -30 -25 -20 -15 -10 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2100MHz SPE-11-8-032/F/SS Page 12 of 17 5. Radiation Pattern 5.1 TG.09 in Free Space Vertical Horizontal TG.09 180o in free space -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2100MHz TG.09 90o in free space -35 -30 -25 -20 -15 -10 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2100MHz Vertical Horizontal TG.09 180° in free space TG.09 90° in free space 5.1 TG.09 in Free Space
SPE-11-8-032/F/SS | page 12 of 16 5.2 TG.09 Mounted on PCB SPE-11-8-032/F/SS Page 13 of 17 5.2 TG.09 Mounted on PCB Vertical Horizontal TG.09 180o on PCB -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz TG.09 90o on PCB (0-90) -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz SPE-11-8-032/F/SS Page 13 of 17 5.2 TG.09 Mounted on PCB Vertical Horizontal TG.09 180o on PCB -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz TG.09 90o on PCB (0-90) -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz SPE-11-8-032/F/SS Page 13 of 17 5.2 TG.09 Mounted on PCB Vertical Horizontal TG.09 180o on PCB -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz TG.09 90o on PCB (0-90) -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz SPE-11-8-032/F/SS Page 13 of 17 5.2 TG.09 Mounted on PCB Vertical Horizontal TG.09 180o on PCB -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz TG.09 90o on PCB (0-90) -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz Vertical Horizontal TG.09 180° on PCB TG.09 90° on PCB (0-90)
SPE-11-8-032/F/SS | page 13 of 16 5.3 TG.09 Mounted At a Side of PCB SPE-11-8-032/F/SS Page 14 of 17 5.3 TG.09 Mounted At a Side of PCB Vertical Horizontal TG.09 180o mounted at the side of PCB -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz TG.09 90o mounted at the side of PCB (270-90) -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz SPE-11-8-032/F/SS Page 14 of 17 5.3 TG.09 Mounted At a Side of PCB Vertical Horizontal TG.09 180o mounted at the side of PCB -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz TG.09 90o mounted at the side of PCB (270-90) -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz SPE-11-8-032/F/SS Page 14 of 17 5.3 TG.09 Mounted At a Side of PCB Vertical Horizontal TG.09 180o mounted at the side of PCB -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz TG.09 90o mounted at the side of PCB (270-90) -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz SPE-11-8-032/F/SS Page 14 of 17 5.3 TG.09 Mounted At a Side of PCB Vertical Horizontal TG.09 180o mounted at the side of PCB -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz TG.09 90o mounted at the side of PCB (270-90) -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz Vertical Horizontal TG.09 180° mounted at the side of PCB TG.09 90° mounted at the side of PCB (270-90)
SPE-11-8-032/F/SS | page 14 of 16 5.4 TG.09 Mounted on a Metal Plane SPE-11-8-032/F/SS Page 15 of 17 5.4 TG.09 Mounted on a Metal Plane Vertical Horizontal TG.09 180o mounted on metal plane -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz TG.09 90o mounted on metal plane (0-90) -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz SPE-11-8-032/F/SS Page 15 of 17 5.4 TG.09 Mounted on a Metal Plane Vertical Horizontal TG.09 180o mounted on metal plane -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz TG.09 90o mounted on metal plane (0-90) -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz SPE-11-8-032/F/SS Page 15 of 17 5.4 TG.09 Mounted on a Metal Plane Vertical Horizontal TG.09 180o mounted on metal plane -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz TG.09 90o mounted on metal plane (0-90) -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz SPE-11-8-032/F/SS Page 15 of 17 5.4 TG.09 Mounted on a Metal Plane Vertical Horizontal TG.09 180o mounted on metal plane -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz TG.09 90o mounted on metal plane (0-90) -35 -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 -10 850MHz 900MHz 1800MHz 1900MHz 2170MHz Vertical Horizontal TG.09 180° mounted on metal plane TG.09 90° mounted on metal plane (0-90)
SPE-11-8-032/F/SS | page 15 of 16 6. Mechanical Drawing (unit:mm) This drawing and its inherent design concepts are property of Taoglas. Not to be copied or given to third parties without the written consent of Taoglas. TW Design Centre ALL Initial Design Jason 2011/6/15A ALL Add 3D View Jason 2011/8/1B 3D View Name Material Finish QTY Housing SMA(M) ST POM Black Ni Plated Ni Plated Black Hinge Brass POM Brass Cap Pin A2 Amend Typo Kiwi 2011/10/5C C
1 Housing POM Black
2 Hinge Brass Ni Plated
3 Cap POM Black
4 Connector SMA Male (Brass)
SPE-11-8-032/F/SS | page 16 of 16 7. Packaging 1pcs antennas per small PE bag. 100 small PE bags per big PE bag. 100pcs antennas per big sealed PE bag. Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. Copyright © Taoglas Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： ANGLES＝± HOLEDIA ＝± SCALE： xxxx UNIT：mm DRAWN BY: jason CHECKED BY: Jimmy DESIGNED BY: Jimmy APPROVED BY: Jimmy DOCUMENT PAGE REV. TITLE: TG.09 Antenna Assembly NO. ISO NO: PSP-12-8-00 PAGE 6 OF 6 5 包裝規格 5.1 每個小PE 袋放置1 天線 【1 pcs antennas per small PE bag.】 5.2 每個大PE 袋放置100 個小 PE 袋,如下圖所示 【100 small PE bags per big PE bag.】 5.3 每包大PE 袋內數量共 100pcs 天線 【100 pcs antennas per big PE bag.】 5.4 封口時須注意不可壓到天線,裝入需平整不可雜亂 【Antenna should be placed flat and neat in the PE bag. Hot seal the PE bag without pressing or damage the antenna.】 5.5 清點每袋數量不可短缺 【Confirm the quantity in each PE bag .】
100 PCS PE Bag
1 PCS Bag
大 PE 袋 TG.09 小 PE 袋