TFS110K2

TFS110K2 ETC

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

TFS110k2.doc version 1.2 21.11.01 VI TELEFILTER Filter specification TFS 110 K2 1/5 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com Measurement Condition Ambient Temperature: 23 °C Input Power Level: 0 dBm Terminating impedances *: Input: 700 Ω || -13,7 pF Output: 700 Ω || -11,6 pF Characteristics Remark: Reference level for the relativ e attenuation arel of the TFS 110 K2 is the mini mum of the pass band attenuation a min. The minimum of the pass band attenuation amin is defined as the insertion loss a e. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies giv en below also if the centre frequency fo is shifted due to the temper ature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fo. D a t a typ. Value Limit Insertion Loss ae = amin - max. 9 dB (Reference level) Nominal Frequency fN 110,6 MHz Relative Attenuation a rel fN - 65 kHz ... fN + 65 kHz - max. 1 dB fN ± 65 kHz ... fN ± 82,5 kHz - max. 1,5 dB fN ± 400 kHz ... fN ± 800 kHz - min. 22 dB fN ± 800 kHz ... fN ± 1,6 MHz - min. 27 dB fN ± 1,6 MHz ... fN ± 10 MHz - min. 35 dB fN ± 10 MHz ... fN ± 25 MHz - min. 45 dB Group delay GD Ripple fN ± 80 kHz 300 ns max 500 ns Input Power Level - max.+10 dBm Operating Temperature Range - 25 °C...+ 85 °C *) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. Generated: Checked / approved: VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

TFS110k2.doc version 1.2 21.11.01 VI TELEFILTER Filter specification TFS 110 K2 2/5 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com Construction, pin connection and 50 Ω - matching network (All dimensions in mm) TFS 110K2 N44 Datecode tft C1 C2 VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

TFS110k2.doc version 1.2 21.11.01 VI TELEFILTER Filter specification TFS 110 K2 3/5 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com Stability characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Damp heat: 25 °C to 55°C / 95% r.H. / 10 cycles (cycle) DIN IEC 68 - 2 – 30 Db 4. Resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; 5. Density min. 1 E mbar*l/s Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 1700 Reel of empty components at start: min 300 mm Reel of empty components at start including leader: min 500 mm Trailer min 300 mm Do Po E F W EMBOSSED CARRIER TAPE COVER TAPE G P 2 Bo Ao 21,4 ± 0,1 D 1 Tape (all dimensions in mm) W : 24 ± 0,3 Po : 4 ± 0,1 Do : 1,5 + 0,1 E : 1,75 ± 0,1 F : 11,5 ± 0,1 G (min) : 0,6 P2 : 2 ± 0,1 P1 : 12 ± 0,1 D1(min) : 1,5 Ao : 7,1 ± 0,2 Bo : 13,9 ± 0,2 D1 : 1,5 + 0,1 A C N W 1 W 2 Reel (all dimensions in mm): A : 330 W1 : 24,4 +2 W2 (m ax) : 30,4 N (m in) : >= 60 C : 13 + 0,5/ -0,2 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tap VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

TFS110k2.doc version 1.2 21.11.01 VI TELEFILTER Filter specification TFS 110 K2 4/5 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com Air reflow temperature conditions 1st and 2nd air reflow profile Name: pre-heating periods main-heating periods peak temperature Temperature: 150 °C - 170 °C over 200 °C 255 °C ± 5 °C T ime: 60 sec. - 90 sec. 20 sec. - 25 sec. Chip-mount air reflow profile time / sec. temperature / °C 100 120 140 160 180 200 220 240 260 0 20 40 60 80 100 120 140 160 180 200 220 240 Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. temperature / °C time / sec. temperature / °C 0 23 140 160 10 34 150 161 20 46 160 164 30 60 170 170 40 80 180 180 50 103 190 205 60 121 195 230 70 134 200 255 80 143 205 230 90 150 210 205 100 154 215 180 110 156 220 165 120 158 230 140 130 159 240 120 VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

TFS110k2.doc version 1.2 21.11.01 VI TELEFILTER Filter specification TFS 110 K2 5/5 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com 8. History Version Reason of Changes Name Date 1.0 generate specification according to customer requirements Pfeiffer 06.06.2001 1.1 density parameter added Pfeiffer 26.10.2001 1.2 remove AC voltage specification Steiner 21.11.2001 VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.