TF11 HIROSE
Document overview
- PDF pages: 6
Technical content
Page 1
HIROSE KOREA FPC To Board Connector
TF11-SERIES
목 차
- 제품 특징 ----------------------------------------------------- Page 2
- 제품 규격 및 구성 -------------------------------------------- Page 3
- 제품 상세 내용 ----------------------------------------------- Page 4~5
| No. | 제 품 명 | Pin수 | 사양 | 관련 Page |
| 1 | TF11-9S-0.4SH | 9 | 0.4mm Pitch , 0.65mmHeight | 4~5 |
- Reflow profile (Lead-free) ----------------------------------- Page 6
Page 1
Page 2
TF11-SERIES
0.4mm Pitch, 0.65mm Height, Back-Flip Type, 1Row, Bottom Contact, FPC To Board CONNECTOR

■ 특 징
1. LOW PROFILE 제품에서 높은 FPC 발거력 / MISS ALIGN 방지
1) 돌기형 FPC 말단 형상과 ACTUATOR의 돌기형 HOOK가 체결 시 결합하는 구조로 FPC 발거력 향상 구현 2) 체결 시 결합 구조로 FPC 오삽입 등에 의한 CONTACT MISS ALIGN 방지 2. Back-Flip 방식에 의한 우수한 작업성 / 접촉 신뢰성 향상 1) Back-Flip 방식 채택으로 Front-Flip 방식 대비 실장 후 FPC 체결 작업 시 우수한 작업성 실현 2) Back-Flip 방식은 FPC 수직 발거 방향과 ACTUATOR Open 방향이 서로 역방향으로 장기적인 접촉 신뢰성을 향상
3. LOW PROFILE 제품에서 우수한 FPC 삽입 작업성
1) FPC 삽입구 폭(=두께 방향)은 MIN. 0.24로 0.12t FPC 사용시 88% 마진 확보
4. 개별 단자와 ACTUATOR의 결합구조로 ACTUATOR 이탈 현상 방지 5. 단자와 금구의 전/후 PATTERN으로 납땜 BALANCE 및 PCB 고정 강도 향상
- 단자의 Ni BARRIER 도금으로 LOW PROFILE 제품에서의 FLUX 오름 방지 1) CONTACT부 및 LEAD부(SOLDER부) Au도금, 중간부 Ni BARRIER도금 적용으로 납땜시 FLUX오름에 의한 접촉 불량현상 방지
7. CASE 상측, ACTUATOR 등면을 확용한 실장 흡착으로 PICK-UP ERROR 감소
■ 용 도
-. NOTE PC LED BLU Interconnecting. -. Compact devices for interconnecting the main circuite board with the HHP, LCD, PDA, HDD or other device.
Page 2
Page 3
■ 제품 규격
| Rating | Current 0.5A | Operating temperature range | Storage temperature range |
| Voltage 50V | - 55℃ ∼ + 85℃ | - 10℃ ∼ + 50℃ |
| Item | Specification | Conditions |
|---|---|---|
| Insulation Resistance | 500MΩ Min | Measureed at 100V DC |
| Withstand voltage | Neither shot or insulation beakdown | 150V AC for 1 minute |
| Contact Resistance | 100mΩ Max | Measured at 1mA(or 1,000㎐) |
| FPC Retention Force | Ver.:225gf MIN / Hor.:225gf MIN | Measure at 0.12±0.02mm FPC |
| Mechanical Operation | Contact Resistance : 100mΩ Max | 20 Time insertions and extractions. |
| Moisture Resistance | Temperature : 40±2℃ | Contact Resistance : 100mΩ Max Insulation Resistance : 50MΩ Min |
| Relative Humidity : 90∼95% | ||
| Duration : 96Hr | ||
| Resistance to Soldering Heat | Reflow : 250℃ MAX 30s, 217℃ and over. 90~120s | No deformation of components affecting performance. |
■ 부품별 적용 원재료
| Part | Material | Finish | Remarks |
|---|---|---|---|
| CASE | LCP | BLACK | UL94V-0 |
| ACTUATOR | LCP | BLACK | UL94V-0 |
| CONTACT | Phosphor Bronze | Gold plating over Ni | Ni Barrier |
| METAL FITTING | Phosphor Bronze | Sn plating over Ni | - |
※ Reflow최대 온도 250℃를 만족시킴으로 Lead-free Soldering의 요구조건에 적합한 제품임. ※ RoHS지침 및 유해 물질 관리 기준에 적합한 제품임.
■ Part Number의 구성
0.4 SH
TF 11 - \*\* S -
⑤ ⑥
① ②
③ ④
| ① | Serieal Name | TF |
| ② | Serieal No. | 11 |
| ③ | Contact 수 | 9 Cotacts |
| ④ | Contact 분류 | S : Socket |
| ⑤ | Contact Pitch | 0.4mm |
| ⑥ | Contact type | SH(SMT horizontal mount type) |
Page 3

Page 4

Page 5

Page 6
■ Reflow Profile
Using Lead-free Solder Paste

50
##
150
##
250
##
Time (Seconds)
Recommended Application Conditions Reflow System: IR reflow Solder: Cream type Sn / 3 Ag / 0.5 Cu Flux content 11%wt Metal mask thickness: 0.15mm Preheating time: 150℃~190℃, 90±30seconds
A'=150℃~170℃ , B'=170℃~190℃
Soldering time: 250℃ Max 220℃ Min, 30~60 seconds
Page 6