TEN06-05D12 ETC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Maximum output power 6 Watts Voltage accuracy Full load and nominal Vin ± 2% Minimum load 0% Line regulation LL to HL at Full Load 0.2% Load regulation 10% to 100% FL 0.5% Ripple and noise 50MHz bandwidth 120mVp-p, max Maximum temperature drift /G730.02% / ºC Transient response recovery time 25% load step change 500uS, typ Short circuit protection Continuous, automatics recovery Over current protection 150%, typ. INPUT SPECIFICATIONS Input voltage range 5V nominal input 12V nominal input 24V nominal input 48V nominal input 4.5 – 9VDC 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter L-C filter Input surge voltage 100mS max 5V nominal input 12V nominal input 24V nominal input 48V nominal input 15VDC 36VDC 50VDC 100VDC Remote ON/OFF See figure 1 OUTPUT VOLTAGE ADJUSTMENT TERMINAL(Vset ) (Note1) Model number Open -Vout shorted +Vout shorted XXS33 XXS05 XXS12 XXD12 3.3V 12V /G7312V 3.67V 15V /G7315V 2.84V 4.3V Model number Open -Vout connected with resistance (2) +Vout connected with resistance (2) XXS33 XXS05 XXS12 XXD12 3.3V 12V /G7312V 3.3 to 3.67V (3-1) 5 to 6V (3-3) 12 to 15V (3-5) /G7312 to /G7315V (3-6) 3.3 to 2.84V (3-2) 5 to 4.3V (3-4) GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Input to Output Input to Case Output to Case

500 Vac

Isolation capacitance 300 pF,max Safety standard pending IEC60950, J60950, UL60950, EN60950 Switching frequency Full load to No load 100 to 1500 KHz Case material Metal case Base material None Weight 20.0g (0.71oz) Dimension 1.61 x 1.02 x 0.33 Inch (41 x 25.8 x 8.5 mm) MTBF (Note 4) 650Fit (1500000hrs, 100% Load) ENVIRONMENTAL SPECIFICATIONS Operating temperature range (with derating) -20ºC to +70ºC Storage temperature range -40ºC to +85ºC Cooling Nature convection Thermal shock MIL-STD-810D Vibration At no operation, 10~55~10Hz (sweep for 15min.) amplitude 1. 5mm constant (maximum 9G X, Y , Z 2hrs each) Shock 100G Operating humidity range 20% to 95% RH Storage humidity range 20% to 95% RH EMC CHARACTERISTICS Meet EN55022 classes A recommend circuit with external capacitor filter at input ( Note 5 ) 5V input 220uF/16V 12V input 220uF/25V 24V input 100uF/50V 48V input 100uF/100V EMC external circuit

  • PACKAGE, 1.61 x 1.02 x 0.33 INCH
  • NO EXTERNAL INPUT AND OUTPUT CAPACITOR NEEDED
  • 2:1 WIDE INPUT VOLTAGE RANGE
  • LOW RIPPLE & NOISE
  • FIVE-SIDED SHIELD
  • OVER CURRENT PROTECTION
  • SHORT CIRCUIT PROTECTION
  • LONG LIFE WITHOUT ELECTROLYTIC CAPACITOR The TEN06 series offer 6 watts of output power from a 1.61 x 1.02 x 0.33 inch package without derating to 50ºC and without external input/output capacitor. The TEN06 series with 2:1 wide input voltage of 4.5-9, 9-18, 18-36 and 36-75VDC and features 500VAC of isolation, short-circuit protection. The safety meets to EN60950 and UL1950. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25ºC otherwise noted Input Output - - DC-DC Converter

Current (6) Eff (7) (%) Capacitor(8) Load max TEN06-05S33 4.5 – 9 VDC 3.3 VDC 2.84 – 3.67 VDC 1200 mA 1212 mA 70 6600 uF TEN06-05S05 4.5 – 9 VDC 5 VDC 4.3 – 6 VDC 1000 mA 1429 mA 74 3000 uF TEN06-05S12 4.5 – 9 VDC 12 VDC 12 – 15 VDC 500 mA 1622 mA 78 1400 uF TEN06-05D12 4.5 – 9 VDC /G7312 VDC /G7312 – /G7315 VDC /G73250 mA 1667 mA 76 /G73510 uF TEN06-12S33 9 – 18 VDC 3.3 VDC 2.84 – 3.67 VDC 1500 mA 604 mA 73 6600 uF TEN06-12S05 9 – 18 VDC 5 VDC 4.3 – 6 VDC 1200 mA 658 mA 80 3000 uF TEN06-12S12 9 – 18 VDC 12 VDC 12 – 15 VDC 500 mA 617 mA 85 1400 uF TEN06-12D12 9 – 18 VDC /G7312 VDC /G7312 – /G7315 VDC /G73250 mA 617 mA 85 /G73510 uF TEN06-24S33 18 – 36 VDC 3.3 VDC 2.84 – 3.67 VDC 1500 mA 286 mA 77 6600 uF TEN06-24S05 18 – 36 VDC 5 VDC 4.3 – 6 VDC 1200 mA 321 mA 82 3000 uF TEN06-24S12 18 – 36 VDC 12 VDC 12 – 15 VDC 500 mA 309 mA 85 1400 uF TEN06-24D12 18 – 36 VDC /G7312 VDC /G7312 – /G7315 VDC /G73250 mA 309 mA 85 /G73510 uF TEN06-48S33 36 – 75 VDC 3.3 VDC 2.84 – 3.67 VDC 1500 mA 143 mA 77 6600 uF TEN06-48S05 36 – 75 VDC 5 VDC 4.3 – 6 VDC 1200mA 165 mA 80 3000 uF TEN06-48S12 36 – 75 VDC 12 VDC 12 – 15 VDC 500 mA 155 mA 85 1400 uF TEN06-48D12 36 – 75 VDC /G7312 VDC /G7312 – /G7315 VDC /G73250 mA 155 mA 85 /G73510 uF PIN CONNECTION PIN SINGLE DUAL 1 + Vi + Vi

2 Ctrl Ctrl

4 NC - Vo

6 Vset Vset

  1. The follow output voltage can be outputted by connecting this terminal to an output + or – terminal. Unless the output voltage is adjusted, this terminal should be open. 2. In addition, the voltage can be adjusted not by shorting these terminals, but by connecting them to resistances as shown below. 3. Arithmetic expression connected resistance: R ( K/G2d6 ) 3-6 Vo=2.5+22*(R+12.7)/(R+10)(Between two outputs) 4. Bellcore TR-NWT-000332. Case1:50% Stress, temperature at 40ºC. (Ground fixed and controlled environment) 5. The filter capacitor recommended use “ CHEMICON “ KMF series or equivalent impedance at 0.16 ~ 0.33/G2d6 ( 100KHz 20 /Gd12 ) 6. Maximum value at nominal input voltage and full load. 7. Typical value at nominal input voltage and full load. 8. Test by minimum Vin and constant resistor load. 5(4) 6(6) TRIM UP 6(6) 7(7) TRIM DOWN Output can be externally trimmed by using the method shown below. ( ) for dual output trim EXTERNAL OUTPUT TRIMMING RU RD 30 40 50 60 70 80-20 0 -10 100 AMBIENT TEMPERATURE (ºC) OUTPUT POWER (%) Derating Curve Nature convection ALL DIMENSIONS IN INCHES (mm) PIN PITCH TOLERANCE /G730.014(0.35) BOTTOM VIEW