TE310

TE310 TEMEX

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

• Frequency Range : 10MHz to 100 MHz
• Supply Voltage : +5V or +12V
• Low Consumption : 30 mA max
• Frequency Stability vs. Operating Temperature : from +/- 0.5ppm to +/– 5ppm
• Ageing : +/- 5ppm over 15 years
• Output Wave Form : square CMOS compatible
• Hermetic case
• Component selected as per ECSS-Q-ST-60C
• Materials selected as per ECSS-Q-70
• Manufacturing in accordance with: o MIL-PRF-55310 (Class 1, type 3, level S,B) o ECSS-Q-ST-70-08C and ECSS-Q-ST-70-38C

Applications

• GPS receivers
• Converters
• Board calculators
• Synthesizers
• FGU Specifications

1.0 Environmental conditions

Line Parameters Conditions/remarks Min Nom Max Unit Temperature option A 0 25 50 °C Temperature option B -20 25 70 °C 1.1 Operating Temperature Temperature option C -40 25 85 °C

1.2 Switch-on Temperature TSo -40 85 °C

1.3 Non-Operating Temperature TNOp - 55 125 °C

1.4 Random Vibration Level as per MIL-STD-202), Met hod 214, Condition I-K (46,3 Grms)

1.5 Sine Vibration Level as per MIL-STD-202), Metho d 204, Condition D (20G)

1.6 Shocks

Mechanical shock as per MIL-STD-202, Method 213, Condition E (half sine with a peak acceleration of 1000g for duration of 0.5 msec)

1.7 Radiation TID : 100 kRad, low dose rate

No SEL up to LET=60 MeV/mg/cm²

Space Temperature Compensated Crystal Oscillator TE 310 TCXO Series 310 March, 11th 2012 Specifications subject to change without notice Shortform, 51000655.110, Issue A3 2 / 5 www.rakon.com

2.0 Electrical interface

Line Parameters Conditions/remarks Min Nom Max Unit Supply option 1 4.75 5.0 5.25 V 2.1 Power supply Supply option 2 11.4 12.0 12.6

10 MHz ≤ Frequency < 30 MHz, In parallel with 1 k Ω 13 15 18 pF

30 MHz ≤ Frequency < 50 MHz, In parallel with 1 k Ω 6.2 7 7.5 pF 2.2 Load Impedance 50 MHz≤Frequency < 100 MHz, In parallel with 1 k Ω 4.2 4.7 5.1 pF

2.3 Adjustment Resistor Radj Calibration option 1 0 10 kΩ

3.0 Performances

Line Parameters Conditions/Remarks Min Typ Max Unit

3.1 Nominal Frequency 10 100 MHz

3.2 Steady state supply power (Rnom) 30 mA

3.3 Initial frequency accuracy Calibration

option 1 Rnom ± 1 ppm Negative slope RadjMin +5 ppm 3.4 Frequency adjustment Calibration option 1 RadjMax - 5 ppm

3.5 Calibration option 2 NA

Temperature option A ± 0.5 ppm Temperature option B ± 1 ppm 3.6 Frequency stability vs temperature Temperature option C ± 5 ppm 3.7 Frequency variation vs. supply voltage Over Operating Temperature ± 0.1 ppm 3.8 Frequency variation vs. load Over Operating Tem perature ± 0.2 ppm

3.9 Over 1 year ± 1 ppm

3.10 Frequency ageing Over 15 years ± 5 ppm

3.11 Output waveform AHCMOS compatible Square

3.12 VOL 0.4 V 3.13 Output level VOH 2.4 V

3.14 Duty cycle 45 55 %

3.15 Rise time 10%-90% of Vcc 5 ns

3.16 Fall time 90%-10% of Vcc 5 ns

Space Temperature Compensated Crystal Oscillator TE 310 TCXO Series 310 March, 11th 2012 Specifications subject to change without notice Shortform, 51000655.110, Issue A3 3 / 5 www.rakon.com

4.0 Mechanical features

5.0 Pin description

Line Pin number Name Function 5.1 1-3-7-12-14 GND Electrical & Mechanical Ground 5.2 2 Vcc Supply Voltage 5.3 4 – 5 - 8 - 9 – 10 - 11 NC Do not connect 5.4 6 Radj Calibration option 1 Resistor Adjustment 5.5 13 Fout Frequency Output Weight 25 grams

Space Temperature Compensated Crystal Oscillator TE 310 TCXO Series 310 March, 11th 2012 Specifications subject to change without notice Shortform, 51000655.110, Issue A3 4 / 5 www.rakon.com

6.0 Model philosophy

Representativeness Engineering Model Engineering Qualification Model Qualification Model Flight Model Flight Model Lot Acceptance test (option A) (options B, C) (option D) (options E, F, G, H) (option I) Component Passive commercial parts Active parts from the same manufacturer of HiRel parts Mil Grade parts procured from the same manufacturer of HiRel parts HiRel Parts HiRel Parts HiRel Parts Crystal material Swept quartz Stabilized Swept quartz Stabilized Swept quartz ESCC3501 Stabilized Swept quartz ESCC3501 Stabilized Swept quartz ESCC3501 Stabilized Mechanical interface Flight representative in form-fit- function Flight representative in form-fit-function Flight design Flight design Flight design Electrical interface Flight design Flight design Flight design Flight design Flight design Tests Acceptance testing Qualification testing Qualification testing (including screening) Acceptance testing (including screening) Acceptance testing (including screening)+ LAT Workmanship IPC610 ECSS-Q-ST-70-08 & 70-38 ECSS-Q-ST-70-08 & 70-38 ECSS-Q-ST- 70-08 & 70- ECSS-Q-ST- 70-08 & 70-

7.0 Flight Model Screening according to MIL-PRF-55310

• Full Level S (option E)
• Level S with combined burn in aging of 480 hours (option F)
• Full Level B (option G)
• Level B with combined burn in aging of 480 hours (option H) Lot Acceptance test could be performed on all screening options

8.0 Options for Engineering Qualification Model

• Production manufacturing, qualification flow including qualification mechanical tests (option B)
• Production manufacturing, electrical tests only (option C)

9.0 Deliverable documentation

• Test data
• Full specification
• Certificate of Conformity (CoC)

Space Temperature Compensated Crystal Oscillator TE 310 TCXO Series 310 March, 11th 2012 Specifications subject to change without notice Shortform, 51000655.110, Issue A3 5 / 5 www.rakon.com

10.0 Ordering part number definition

The part number breakdown is defined as follows: Series Supply voltage 1 = 5V 2 = 12V Temperature range/Stability A = 0° C to +50° C, ± 0.5 ppm B = –20° C to +70° C, ± 1 ppm C = –40° C to +85° C, ± 5 ppm Model A = EM B = EQM full environmental testing C = EQM reduced environmental testing D = QM E = FM level S F = FM level S with combined BI-aging G = FM level B H = FM level B with combined BI-aging I = FM + group C TE 310 40M000000 Frequency, fnom E A 1 Wave form 1 = Square AHCMOS Frequency adjustment 1: ± 5 ppm 1 1