TE300 TEMEX
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
- ITAR-Free
- Frequency Range : 10MHz to 100 MHz
- Supply Voltage : +5V or +12V
- Low Consumption : 30 mA max
- Frequency Stability vs. Operating Temperature : from ± 0.5ppm to ± 5ppm
- Ageing : ± 5ppm over 15 years
- Output Wave Form : sine 50 Ohms
- Output Level : from 0 to 8 dBm
- Hermetic case
- Component selected as per ECSS-Q-ST-60C
- Materials selected as per ECSS-Q-70
- Manufacturing in accordance with: o MIL-PRF-55310 (Class 1, type 3, level S,B) o ECSS-Q-ST-70-08C and ECSS-Q-ST-70-38C
Applications
- GPS receivers
- Converters
- Board calculators
- Synthesizers
- FGU Specifications
1.0 Environmental conditions
Parameter Conditions/remarks Min Nom Max Unit Option A 0 25 50 °C Option B -20 25 70 °C Operating Temperature Option C -40 25 85 °C Switch-on Temperature TSo -40 85 °C Non-Operating Temperature TNOp -55 125 °C Random Vibration Level as per MIL-STD-202, Method 2 14, Condition I-K (46,3 Grms) Sine Vibration Level as per MIL-STD-202, Method 204 , Condition D (20G) Shocks Mechanical shock as per MIL-STD-202, Method 213, Condition E (half sine with a peak acceleration of 1000g for duration of 0.5 msec) Radiation TID : 100 kRad, low dose rate No SEL up to LET = 60 MeV/mg/cm²
Space Temperature Compensated Xtal Oscillator TE 300 TCXO Series 300 December 23rd, 2011 Shortform, 51000654.110, Issue A4 2 / 5 www.rakon.com
2.0 Electrical interface
Parameters Conditions/remarks Min Nom Max Unit Option 1 4.75 5 5.25 V Power supply Option 2 11.4 12 12.6 V Load Impedance 45 50 55 Ω Adjustment resistor Radj / Calibration option 1 0 R adjNom* 10 κΩ Note: RadjNom will be indicated on final test report
3.0 Performances
Parameters Conditions/Remarks Min Typ Max Unit Nominal Frequency 10 100 MHz Steady state power supply 0.2 W Initial frequency accuracy ± 1 ppm Frequency adjustment Calibration option 1 / negative slope 5 -5 ppm Temperature option A ± 0.5 ppm Temperature option B ± 1 ppm Frequency-temperature stability Temperature option C ± 5 ppm Frequency variation vs. supply voltage Over Operating Temperature ± 0.1 ppm Frequency variation vs. load Over Operating Temperature ± 0.2 ppm Start up time 10 ms Over 1 year ± 1 ppm Frequency ageing Over 15 years ± 5 ppm Output waveform Sine Supply voltage option 1 0 dBm Output level Supply voltage option 2 7 dBm Harmonics level -30 dBc Spurious level 100 Hz to 100kHz -80 dBc @ 10 Hz offset -75 dBc/Hz @ 100 Hz offset -105 dBc/Hz @ 1 kHz offset -130 dBc/Hz Static Phase noise (noise floor) @ 10 kHz offset -145 dBc/Hz Allan Variance 1s 1 ppb
Space Temperature Compensated Xtal Oscillator TE 300 TCXO Series 300 December 23rd, 2011 Shortform, 51000654.110, Issue A4 3 / 5 www.rakon.com
4.0 Mechanical features
5.0 Pin description
Pin number Name Description
2 Vcc Supply voltage
4,5,8,9,10,11 NC Do not Connect
6 Radj Frequency adjustment option 1
13 Fout Frequency output
Space Temperature Compensated Xtal Oscillator TE 300 TCXO Series 300 December 23rd, 2011 Shortform, 51000654.110, Issue A4 4 / 5 www.rakon.com
6.0 Model philosophy
Representativeness Engineering Model Engineering Qualification Model Qualification Model Flight Model Flight Model + Lot Acceptance test Options A B, C D E, F, G, H I Components Passive commercial parts, Active parts from the same manufacturer of HiRel parts Mil Grade parts procured from the same manufacturer of HiRel parts HiRel Parts HiRel Parts HiRel Parts Crystal material Swept quartz stabilized Swept quartz stabilized ESCC3501 Swept quartz stabilized ESCC3501 Swept quartz stabilized ESCC3501 Swept quartz stabilized Mechanical interface Flight representative in form-fit-function Flight representative in form-fit-function Flight design Flight design Flight design Electrical interface Flight design Flight design Flight design Flight de sign Flight design Tests Acceptance testing Qualification testing Qualification testing (including screening) Acceptance testing (including screening) Acceptance testing (including screening)+ LAT Workmanship IPC610 ECSS-Q-ST-70-08 & 70-38 ECSS-Q-ST-70- 08 & 70-38 ECSS-Q-ST-70- 08 & 70-38 ECSS-Q-ST-70-08 & 70-38
7.0 Flight Model Screening according to MIL-PRF-55310
- Full Level S (option E)
- Level S with combined burn in aging of 480 hours (option F)
- Full Level B (option G)
- Level B with combined burn in aging of 480 hours (option H) Lot Acceptance test could be performed on all screening options
8.0 Options for Engineering Qualification Model
- Production manufacturing, qualification flow including qualification mechanical tests (option B)
- Production manufacturing, electrical tests only (option C)
9.0 Deliverable documentation
- Test data
- Full specification
- Certificate of Conformity (CoC)
Space Temperature Compensated Xtal Oscillator TE 300 TCXO Series 300 December 23rd, 2011 Shortform, 51000654.110, Issue A4 5 / 5 www.rakon.com
10.0 Ordering part number definition
The part number breakdown is defined as follows: RAKON-TEMEX Series Supply voltage 1 = 5V 2 = 12V Temperature range/Stability A = 0° C to +50° C, ± 0.5 ppm B = –20° C to +70° C, ± 1 ppm C = –40° C to +85° C, ± 5 ppm Model A = EM B = EQM full environmental testing C = EQM reduced environmental testing D = QM E = FM level S F = FM level S with combined BI-aging G = FM level B H = FM level B with combined BI-aging I = FM + group C TE 300 40M000000 Frequency, fnom E A 1 Wave form 1 = Sine Frequency adjustment 1 = ± 5 ppm 1 1