TA75S393F ETC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 28
Technical content
General-Purpose Linear ICs Operational Amplifier ICs & Comparator ICs z 118 Intelligent Power Devices (IPD) z 122 Interface Drivers z 125 Motor Drivers z 130 Power Supply ICs z 134 Small-Signal MMICs (High-Frequency Cell-pack) z 142
Operational Amplifier ICs & Comparator ICs Operational Amplifier ICs & Comparator ICs (Bipolar, Single-Circuit Type) Function Part Number Package Marking Features Operating Voltage Pin Configuration (top view) (Unit: mm) Bipolar comparator TA75S393F SMV TA Single/dual power supply, open-collector output 2 to 36 V or ±1 to ±18 V SMV 2.9 1.6 2.8 TA75S01F SMV SA Single/dual power supply, unity gain available 3 to 12 V or ±1.5 to ±6 V Bipolar op amp TA75S558F SMV SB Dual power supply ±4 to ±18 V SMV 2.9 1.6 2.8 Note: Please note that the pin configurations of the input pins of the single operational amps and comparator differ. The US8 a nd SM8 types have the same pin configuration. (Bipolar, Dual-Circuit Type) Function Part Number Package Marking Features Operating Voltage Pin Configuration (top view) (Unit: mm) Bipolar comparator TA75W393FU SM8 5W393 Single/dual power supply, open-collector output 2 to 36 V or ±1 to ±18 V TA75W01FU SM8 5W01 Single/dual power supply, unity gain available 3 to 12 V or ±1.5 to ±6 V Bipolar op amp TA75W558FU SM8 5W558 Dual power supply ±4 to ±18 V SM8 2.9 2.8 US8 2.0 2.3
(CMOS, Single-Circuit Type) Function Part Number Package Marking Features Operating Voltage Pin Configuration TC75S56F SMV TC75S56FU USV TC75S56FE ESV TC Single/dual power supply, push-pull output, ultra-low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V TC75S57F SMV TC75S57FU USV TC75S57FE ESV TD Single/dual power supply, push-pull output, low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V TC75S58F SMV TC75S58FU USV TC75S58FE ESV TE Single/dual power supply, open-drain output, ultra-low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V TC75S59F SMV TC75S59FU USV CMOS comparator TC75S59FE ESV TF Single/dual power supply, open-drain output, low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V TC75S51F SMV TC75S51FU USV TC75S51FE ESV SC Single/dual power supply, low-voltage operation 1.5 to 7 V or ±0.75 to ±3.5 V TC75S54F SMV TC75S54FU USV TC75S54FE ESV SE Single/dual power supply, low-voltage operation, low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V TC75S55F SMV TC75S55FU USV TC75S55FE ESV SF Single/dual power supply, low-voltage operation, ultra-low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V * TC75S60F SMV CMOS op amp * TC75S60FU USV SH Single/dual power supply, high slew rate, high fT, low-voltage operation, low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V Note: Please note that the pin configurations of the input pins of the single operational amps and comparator differ. The US8 a nd SM8 types have the same pin configuration. *: New product SMV USV ESV 2.9 1.6 2.8 2.0 1.25 2.1 1.6 1.2 1.6 (mm) (CMOS, Dual-Circuit Type) Function Part Number Package Marking Features Operating Voltage Pin Configuration (top view) (Unit: mm) TC75W56FU SM8 TC75W56FK US8 5W56 Single/dual power supply, push-pull output, ultra-low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V TC75W57FU SM8 TC75W57FK US8 5W57 Single/dual power supply, push-pull output, low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V TC75W58FU SM8 TC75W58FK US8 5W58 Single/dual power supply, open-drain output, ultra-low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V TC75W59FU SM8 CMOS comparator TC75W59FK US8 5W59 Single/dual power supply, open-drain output, low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V TC75W51FU SM8 TC75W51FK US8 5W51 Single/dual power supply, low-voltage operation 1.5 to 7 V or ±0.75 to ±3.5 V TC75W54FU SM8 TC75W54FK US8 5W54 Single/dual power supply, low-voltage operation, low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V TC75W55FU SM8 TC75W55FK US8 5W55 Single/dual power supply, low-voltage operation, ultra-low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V * TC75W60FU SM8 CMOS op amp * TC75W60FK US8 5W60 Single/dual power supply, high slew rate, high fT, low-voltage operation, low current consumption 1.8 to 7 V or ±0.9 to ±3.5 V SM8 2.9 2.8 US8 2.0 2.3 *: New product
Maximum Ratings Circuit Part Number Package VCC (V) I O (A) Remarks TA7256P HSIP10 ±18 0.5 Internally phase-corrected type Dual TA7272P HSIP10 ±18 1.2 Internally phase-corrected type
Calculation Amplifier IC Series (Op-Amp Series) Classification Use/Function Circuit Part Number Package VIO (mV) Max IIO (nA) Max II (nA) Max fT (MHz) Typ. SR (V/µs) Typ. ICC (mA) Max Recomme- nded VCC (V) Remarks Equivalent TA75358F SOP8 High-speed, low-power Dual TA75358P DIP8 7 50 250 1.5 0.8 1.2 3 to 36 ⎯ TA75358CF SOP8 Dual TA75358CP DIP8 7 50 250 0.6 0.3 1.2 3 to 36 358 2904 TA75902F SOP14 Single power supply op-amps General-purpose, low-power Quad TA75902P DIP14 7 30 150 ⎯ ⎯ 1.2 3 to 36 2902 TA75458F SOP8 Dual power supply op-amps General-purpose Dual TA75458P DIP8 5 200 500 1.1 0.8 6 ±15 1458 (Comparator ICs) Part Number Circuit Package Power Supply (V) Input Offset Current Max Input Offset Voltage Max Input Bias Current Max Response Speed Typ. Remarks Equivalent TA7522S Dual SIP9 +18 0.3 µA 10 mV −2 µA ― Open-collector output ⎯ TA7522F Dual SOP8 +18 0.3 µA 10 mV −2 µA ― Open-collector output ⎯ TA75339P 50 nA 5 mV 250 nA tr = 1.3 µs LM339N LM2901N TA75339AP DIP14 70 nA 10 mV 250 nA tr = 1.0 µs High output current: 100 mA Typ. ⎯ TA75339F Quad SOP14 ±18 or +36 50 nA 5 mV 250 nA tr = 1.3 µs ⎯ TA75393P 50 nA 5 mV 250 nA tr = 1.3 µs LM393N LM2903N TA75393AP DIP8 50 nA 7 mV 250 nA tr = 1.3 µs High output current: 100 mA Typ. ⎯ TA75393F Dual SOP8 ±18 or +36 50 nA 5 mV 250 nA tr = 1.3 µs ⎯ TA8504F Single SOP8 −5 10 µA ±10 mV 40 µA tr = 1.0 ns tf = 0.7 ns ECL output ⎯ TA8517F Dual SOP16 +5 3 µA ±10 mV 6 µA tr = 4.0 ns tf = 2.0 ns TTL output Comes with offset adjustment pin. ⎯
Intelligent Power Devices (IPD)
60 V Series
Protective Functions Diagnostic Functions Part Number Use/Function Outline Operating Supply Voltage (V) Operating Temperature Topr (°C) Junction (Channel) Temperature Tj (°C) Power Dissipation PD (W) Overcurrent IS (A) Over Temperature TS (°C) Overvoltage VS (V) Short load Open load Over Temperature Overvoltage Input/ Output Package TPD1008SA High-side switch VDSS 60 V IO 4 A RDS(ON) = 0.2 Ω Max 5 to 18 6 Typ. 160 Typ. ⎯ DIAG L DIAG H DIAG L ⎯ H/H TO-220(NIS) 5PIN TPD1009S High-side switch VDSS 60 V IO 8 A RDS(ON) = 0.06 Ω Max 5 to 18 −40 to 110 12 Typ. 160 Typ. ⎯ DIAG L DIAG H DIAG L ⎯ H/H TO-220(NIS) 5PIN TPD1011S High-side switch VDSS 60 V IO 15 A RDS(ON) = 0.06 Ω Max 5 to 18 −40 to 85 40 Typ. 160 Typ. ⎯ DIAG L DIAG H DIAG L ⎯ H/H TO-220(IS) 5PIN TPD1018F High-side switch VDSS 60 V IO 0.5 A RDS(ON) = 0.8 Ω Max 5 to 25 −40 to 125 0.3 1.5 Typ. 160 Typ. 30 Typ. DIAG L DIAG L DIAG L H/H SSOP-10PIN TPD1024S Low-side switch VDS(DC) 40 V IO 1.5 A RDS(ON) = 0.5 Ω Max up to 18 −40 to 85 1 3.5 Typ. 160 Typ. Active clamp
40 Min
⎯ ⎯ ⎯ ⎯ H/L PW-MOLD 3PIN TPD1024AS Low-side switch VDS(DC) 40 V IO 1.5 A RDS(ON) = 0.5 Ω Max up to 18 −40 to 85 1.2 3.5 Typ. 160 Typ. Active clamp ⎯ ⎯ ⎯ ⎯ H/L TPS 3PIN TPD1030F 2-ch low-side switch VDS(DC) 40 V IO 1 A RDS(ON) = 0.6 Ω Max up to 40 2.0 (t = 10 s) (mounted on board)
1 Min 160
Typ. Active clamp ⎯ ⎯ ⎯ ⎯ H/L SOP-8PIN TPD1031AF Low-side switch VDS(DC) 50 V IO 8 A RDS(ON) = 0.065 Ω Max up to 18 50 (Tc=25°C) 8 Min 160 Typ. Active clamp
50 Min
⎯ ⎯ ⎯ ⎯ H/L TO-220SM 3PIN TPD1032F 2-ch low-side switch VDS(DC) 20 V IO 3 A RDS(ON) = 0.4 Ω Max up to 20 2.0 (t = 10 s) (mounted on board)
3 Min 160
Typ. Active clamp ⎯ ⎯ ⎯ ⎯ H/L SOP-8PIN TPD1033F High-side switch VDSS 60 V IO 4 A RDS(ON) = 0.22 Ω Max 6 Typ. 160 Typ. ⎯ DIAG L DIAG H DIAG L ⎯ H/H SOP-8PIN TPD1034F High-side switch VDSS 60 V IO 8 A RDS(ON) = 0.08 Ω Max 5 to 18 2.4 (t = 10 s) (mounted on board) 12 Typ. 160 Typ. ⎯ DIAG L DIAG H DIAG L ⎯ H/H SOP-8PIN TPD1036F 2-ch low-side switch VDS(DC) 30 V IO 1.5 A RDS(ON) = 0.5 Ω Max up to 30 −40 to 110 2.0 (t = 10 s) (mounted on board)
1.5 Min 160
Typ. Active clamp ⎯ ⎯ ⎯ ⎯ H/L SOP-8PIN TPD1037BS Low-side switch VDS(DC) 40 V IO 1.5 A RDS(ON) = 0.25 Ω Max up to 40 −40 to 85 0.9 In-rush 10 Typ. Shorted load 3 Typ. 160 Typ. Active clamp ⎯ ⎯ ⎯ ⎯ H/L TO-92MOD 3PIN TPD1038F High-side switch VDSS 60 V IO 3 A RDS(ON) = 0.12 Ω Max 6 to 18 −40 to 110 1.1 (mounted on board)
3 Min
L DIAG H DIAG L ⎯ H/H SOP-8PIN TPD1039F Low-side switch VDS(DC) 45 V IO 1.5 A RDS(ON) = 0.25 Ω Max up to 45 −40 to 85 1.1 (mounted on board) 5 Typ. 125 Min Active clamp
45 Min
⎯ ⎯ ⎯ ⎯ H/L SOP-8PIN TPD1039S Low-side switch VDS(DC) 45 V IO 1.5 A RDS(ON) = 0.25 Ω Max up to 45 −40 to 85 0.9 5 Typ. 125 Min Active clamp ⎯ ⎯ ⎯ ⎯ H/L TO-92MOD 3PIN TPD1042F High-side switch VDSS 60 V IO 7 A RDS(ON) = 0.18 Ω Max 6 to 18 −40 to 115 1.1 (mounted on board)
7 Min 150
Min ⎯ DIAG L DIAG H DIAG L ⎯ H/H SOP-8PIN TPD1044F Low-side switch VDS(DC) 41 V IO 1 A RDS(ON) = 0.6 Ω Max up to 41 −40 to 125 0.9 (mounted on board) Typ. Active clamp
41 Min
⎯ ⎯ ⎯ ⎯ H/L PS-8 ** TPD1045F Low-side switch VDS(DC) 50 V IO 5 A RDS(ON) = 0.1 Ω Max up to 18 −40 to 125 150 1.1 (mounted on board)
5 Min 170
Typ. Active clamp ⎯ ⎯ ⎯ ⎯ H/L SOP-8PIN **: Under development
Protective Functions Diagnostic Functions Part Number Use/Function Outline Operating Supply Voltage (V) Operating Temperature Topr (°C) Junction (Channel) Temperature Tj (°C) Power Dissipation PD (W) Overcurrent IS (A) Over Temperature TS (°C) Overvoltage VS (V) Short load Open load Over Temperature Overvoltage Input/ Output Package TPD2004F Air bag 2-ch squib driver (high-side SS) VBB 30 V RDS(ON) = 1 Ω Max VBB=4 to 25 VCC=4.75 to 5.25 0.8 ⎯ ⎯ ⎯ 1) Squib-short, short-to-battery, short-to-ground and open-circuit detection 2) When an abnormal condition is diagnosed, the safing sensor is turned on. 3) Diagnosis performed on squib driver’s internal MOSFET When LSD = L and HSD = H, squib ignites. SSOP-24PIN TPD2005F 8-ch high-side switch VDD 45 V IO 1 A RDS(ON) = 1.2 Ω Max 8 to 40 0.8 1.0 Min 160 Typ. ⎯ ⎯ ⎯ ⎯ ⎯ H/H SSOP-24PIN TPD2007F 8-ch low-side switch VDS(DC) 40 V IO 1 A RDS(ON) = 1.4 Ω Max up to 40 −40 to 85 0.8 1.0 Min 160 Typ. Active clamp
40 Min ⎯ ⎯ ⎯ ⎯ H/L SSOP-24PIN
TPD7000AF 4-ch low-side Power MOSFET driver VDH 25 V Io 20 mA Max VDH=8 to 18 VDL=4.5 to 5.5 0.5 VDS monitor 1.0 V Typ. ⎯ Active clamp 35 V Typ. DIAG L DIAG H ⎯ ⎯ H/H (ENB=“H”) SSOP-24PIN TPD7100F 2-ch high-side Power MOSFET driver (with built-in charge pump) VDD 30 V Source current 0.1 A Typ. Sink current 0.1 A Typ. 8 to 18 −40 to 110
0.8 Adjustable ⎯
(Undervoltage detected at
4.5 V Max)
Overcurrent ⎯ ⎯ ⎯ H/H SSOP-24PIN TPD7201F 3-phase full-bridge Power MOSFET driver (with built-in charge pump) VDD 30 V Source current
1 A Max
7 to 18 0.8 ⎯ ⎯ 22 V Typ. (Undervoltage detected at 6.0 V Typ.) ⎯ ⎯ ⎯ FAULT H (and undervoltage) H/H SSOP-24PIN TPD7202F H bridge Power MOSFET driver (with built-in charge pump VDD 30 V Source current 7 to 18 0.8 ⎯ ⎯ 22 V Typ. (Undervoltage detected at 6.0 V Typ.) ⎯ ⎯ ⎯ FAULT H (and undervoltage) H/H SSOP-24PIN TPD7203F 3-phase full-bridge Power MOSFET driver (with built-in charge pump) VDD 30 V Source current −40 to 125 150 0.8 ⎯ ⎯ (Undervoltage detected at 6.0 V Typ.) ⎯ ⎯ ⎯ FAULT H (only under voltage) H/H SSOP-24PIN : Dry-packed product
250 V/500 V Series
Part Number Features Rating Output Type Functions Overcurrent Over temperature Undervoltage Package TPD4101K High-voltage PWM DC brushless motor driver
250 V/±1 A 3-phase
full-bridge Hall IC input, bootstrap circuit, PWM, 3-phase decoder { { { HZIP23 TPD4102K High-voltage PWM DC brushless motor driver
500 V/±1 A
full-bridge Hall IC input, bootstrap circuit, PWM, 3-phase decoder { { { HZIP23 TPD4103K High-voltage PWM DC brushless motor driver full-bridge 6-input, low-side driver, high-side driver { { { HZIP23 TPD4103AK High-voltage PWM DC brushless motor driver full-bridge 6-input, low-side driver, high-side driver ⎯ { { HZIP23 TPD4104K High-voltage PWM DC brushless motor driver
500 V/±2 A
full-bridge 6-input, low-side driver, high-side driver { { { HZIP23 TPD4104AK High-voltage PWM DC brushless motor driver full-bridge 6-input, low-side driver, high-side driver ⎯ { { HZIP23 ** TPD4105K High-voltage PWM DC brushless motor driver
500 V/±3 A
full-bridge 6-input, low-side driver, high-side driver { { { HZIP23 ** TPD4105AK High-voltage PWM DC brushless motor driver
500 V/±3 A 3-phase
full-bridge 6-input, low-side driver, high-side driver ⎯ { { HZIP23 ** TPD4111K High-voltage PWM DC brushless motor driver full-bridge Hall amplifier input, bootstrap circuit, PWM, 3-phase decoder { { { HZIP23 ** TPD4112K High-voltage PWM DC brushless motor driver
500 V/±1 A 3-phase
full-bridge Hall amplifier input, bootstrap circuit, PWM, 3-phase decoder { { { HZIP23 **: Under development
Transistor Arrays (Transistor Array/Interface Driver Series) Part Number Device Type No. of Circuits Output Clamp Diode Output Breakdown Voltage (V) Output Current (mA) Input Resistor (Ω) Recommended System Supply Voltage (V) Package TD62001AP/AF Darlington driver 7 { 50 500 NA Any DIP16/SOP16 TD62002AP/AF Darlington driver 7 { 50 500 10.5 k + 7 VZ.D. 14 to 15 DIP16/SOP16 TD62003AP/AF Darlington driver 7 { 50 500 2.7 k 5 DIP16/SOP16 TD62004AP/AF Darlington driver 7 { 50 500 10.5 k 6 to 15 DIP16/SOP16 TD62006P/F Darlington driver 6 { 22 150 20 k 6 to 20 DIP14/SOP14 TD62008AP/AF Darlington driver 7 { 50 400 20 k 6 to 20 DIP16/SOP16 TD62064AP/AF/BP-1/BF High-current darlington driver 4 { 50/50/80/80 1500 230 5 DIP16/ HSOP16 TD62074AP/AF Isolated-type high-current darlington driver 4 50 1500 230 5 DIP16/ HSOP16 TD62081AP/AF Darlington driver 8 { 50 500 NA Any DIP18/SOP18 TD62082AP/AF Darlington driver 8 { 50 500 10.5 k + 7 VZ.D. 14 to 25 DIP18/SOP18 TD62083AP/AF/AFN Darlington driver 8 { 50 500 2.7 k 5 DIP18/SOP18 SSOP18 TD62084AP/AF/AFN Darlington driver 8 { 50 500 10.5 k 6 to 15 DIP18/SOP18 SSOP18 TD62101P/F Darlington driver 7 25 500 NA Any DIP16/SOP16 TD62103P/F Darlington driver 7 25 500 2.7 k 5 DIP16/SOP16 TD62104P/F Darlington driver 7 25 500 10.5 k 6 to 15 DIP16/SOP16 TD62105P/F Darlington driver 7 25 500 20 k 12 to 25 DIP16/SOP16 TD62107P/F Darlington driver (with Enable pin) 4 { 45/35 750 LS-, TTL- compatible 5 DIP16/ HSOP16 TD62164AP/BP/AF/BF High-current, low-saturation driver 4 { 50/80/50/80 700 2 k 5 to 15 DIP16/ HSOP16 TD62304AP/AF/AFN Low-input-active darlington driver 7 50 500 14 k 5 DIP16/SOP16 SSOP16 TD62305AP/AF/AFN Low-input-active darlington driver 7 50 500 14 k + D. 5 DIP16/SOP16 SSOP16 TD62307P/F Low-saturation driver 7 { 20 150 20 k 5 to 18 DIP16/SOP16 TD62308AP/AF/BP-1/BF Low-input-active darlington driver 4 { 50/50/80/80 1500 4 k 5 DIP16/ HSOP16 TD62309P/F Low-saturation driver 6 { 20 700 2 k 5 DIP16/ HSOP16 TD62318AP/BP/AF/BF Low-input-active, low-saturation driver 4 { 50/80/50/80 700 4 k 5 DIP16/ HSOP16 TD62381P/F/FN Low-saturation driver 8 15 500 2.7 k 5 to 18 DIP18/SOP18 SSOP18 TD62382AP/AF/AFN Low-input-active, low-saturation driver 8 50 50 14 k 5 to 18 DIP18/SOP18 SSOP18 TD62383P Low-input-active, low-saturation driver 8 { 10 500 14 k + D. 5 to 18 DIP20 TD62384AP/AF Low-input-active darlington driver 8 50 500 14 k 5 to 18 DIP18/SOP18 TD62385AP/AF Low-input-active darlington driver 8 50 500 14 k + D. 5 to 18 DIP18/SOP18 TD62386AP/AF Low-input-active darlington driver 8 { 50 500 14 k 5 to 7 DIP20/SOP20
Transistor Arrays (Transistor Array/Interface Driver Series) (continued) Part Number Device Type No. of Circuits Output Clamp Diode Output Breakdown Voltage (V) Output Current (mA) Input Resistor (Ω) Recommended System Supply Voltage (V) Package TD62387AP/AF/AFN Low-input-active darlington driver 8 { 50 500 14 k + D. 5 to 7 DIP20/SOP20 SSOP20 TD62388AP/AF/AFN Low-input-active darlington driver 8 { 50 500 14 k + D. 5 to 7 DIP20/SOP20 SSOP20 TD62501P/F Single-transistor array (common-emitter) 7 35 200 NA Any DIP16/SOP16 TD62502P/F/FN Single-transistor array (common-emitter) 7 35 200 10.5 k + 7 VZ.D. 14 to 25 DIP16/SOP16 SSOP16 TD62503P/F/FN Single-transistor array (common-emitter) 7 35 200 2.7 k 5 DIP16/SOP16 SSOP16 TD62504P/F/FN Single-transistor array (common-emitter) 7 35 200 10.5 k 6 to 15 DIP16/SOP16 SSOP16 TD62505P/F Single-transistor array (common-collector) 7 35 −200 NA Any DIP16/SOP16 TD62506P/F Single-transistor array (common-collector) 7 35 −200 2.7 k 5 DIP16/SOP16 TD62507P/F Isolated-type single-transistor array 5 35 −200 NA Any DIP16/SOP16 TD62551S Single-transistor array (common-emitter) 4 25 150 NA Any SIP9 TD62553S Single-transistor array (common-emitter) 4 25 150 2.7 k 5 SIP9 TD62554S Single-transistor array (common-emitter) 4 25 150 10.5 k 6 to 15 SIP9 TD62555S Single-transistor array (common-emitter) 4 25 150 20 k 12 to 25 SIP9 TD62583AP/AF Single-transistor array (common-emitter) 8 50 50 2.7 k 5 DIP18/SOP18 TD62591AP Single-transistor array (common-emitter) 8 50 200 NA Any DIP18 TD62592AP Single-transistor array (common-emitter) 8 50 200 10.5 k + 7 VZ.D. 14 to 25 DIP18 TD62593AP/AFN Single-transistor array (common-emitter) 8 50 200 2.7 k 5 DIP18/SSOP18 TD62594AP/AFN Single-transistor array (common-emitter) 8 50 200 10.5 k 6 to 15 DIP18/SSOP18 TD62595AP/AF Single-transistor array (common-emitter) 8 { 50 200 NA Any DIP18/SOP18 TD62596AP/AF Single-transistor array (common-emitter) 8 { 50 200 10.5 k + 7 VZ.D. 14 to 25 DIP18/SOP18 TD62597AP/AF/AFN Single-transistor array (common-emitter) 8 { 50 200 2.7 k 5 DIP18/SOP18 SSOP18 TD62598AP/AF/AFN Single-transistor array (common-emitter) 8 { 50 200 10.5 k 6 to 15 DIP18/SOP18 SSOP18 TD62601P/F Threshold-free driver (inverted output) 6 20 10 1 M 4 to 18 DIP16/SOP16 TD62602P/F Threshold-free driver (inverted output, open-collector) 6 20 10 1 M 4 to 18 DIP16/SOP16 TD62603P/F Threshold-free driver (non-inverted output) 6 20 10 1 M 4 to 18 DIP16/SOP16 TD62604P/F Threshold-free driver (non-inverted output, open-collector) 6 20 10 1 M 4 to 18 DIP16/SOP16 TD62703P/F High breakdown voltage, source-type driver 6 60 −50 2.7 k 5 DIP14/SOP14 TD62705P/F High breakdown voltage, source-type driver 6 60 −50 47 k 6 to 15 DIP16/SOP16 TD62706P/F High breakdown voltage, source-type driver 6 60 −50 10 k 5 DIP16/SOP16 TD62708N Source-type darlington driver (with Enable pin) 8 40 −1800 NA 5 DIP24N TD62781AP Source-type darlington driver (with pull-down resistor) 8 60 −50 10 k 5 DIP18 TD62782F Source-type darlington driver (with pull-down resistor) 8 35 −50 20 k 6 to 15 SOP18 TD62783AP/AF/AFN Source-type darlington driver 8 { 50 −500 10 k 5 DIP18/SOP18 SSOP18 TD62784AP/AF/AFN Source-type darlington driver 8 { 50 −500 10 k 6 to 15 DIP18/SOP18 SSOP18 TD62785P/F Source-type darlington driver 8 7 −500 5.6-k pull-up 5 DIP18/SOP18 TD62786AP/AF/AFN Source-type darlington driver 8 { 50 −500 14 k 5 DIP18/SOP18 SSOP18 TD62787AP/AF Source-type darlington driver 8 { 50 −500 14 k + D. 5 DIP18/SOP18
(DMOS Array Series) Part Number Package Use Structure TB62003F/P SOP20/DIP20 8-bit DMOS driver 8-bit DMOS driver with inverter gate, 35 V / 200 mA TB62004F/P SOP20/DIP20 8-bit DMOS driver 8-bit DMOS driver with non-inverter gate, 35 V / 200 mA TB62006F/P SOP20/DIP20 8-bit DMOS driver 8-bit DMOS driver with NAND gate, 35 V / 200 mA TB62007F/P SOP20/DIP20 8-bit DMOS driver 8-bit DMOS driver with AND gate, 35 V / 200 mA TB62008F/P SOP20/DIP20 8-bit DMOS driver 8-bit DMOS driver with NOR gate, 35 V / 200 mA TB62009F/P SOP20/DIP20 8-bit DMOS driver 8-bit DMOS driver with OR gate, 35 V / 200 mA (Multi-Chip Transistor Array Series) Part Number Device Type Output Breakdown Voltage (V) Output Current (A) Package TD62M4700F 2-ch push-pull driver, low-saturation type 10 ±2.0 SSOP16 TD62M2701F 2-ch push-pull driver, low-saturation type 10 ±2.0 SSOP16 TD62M2702F 2-ch push-pull driver, low-saturation type 10 ±2.0 SSOP16 TD62M3600F 3-ch source driver, low-saturation type 10 −2.0 SSOP10 TD62M3601F 3-ch source driver, low-saturation type 30 −1.5 SSOP10 TD62M3700F 3-ch push-pull driver, low-saturation type 30 ±1.5 SSOP16 TD62M3701F 3-ch push-pull driver, low-saturation type 10 ±2.0 SSOP16 TD62M3702F 3-ch push-pull driver, low-saturation type 15 ±2.0 SSOP16 TD62M3704F 3-ch push-pull driver, low-saturation type 10 −0.4 SSOP16 TD62M4500F 4-ch sink driver, low-saturation type 10 2.0 SSOP16 TD62M4501F 4-ch sink driver, low-saturation type 20 2.0 SSOP16 TD62M4503AFN 4-ch power MOSFET sink driver + diode 60 0.8 SSOP24 (0.65 mm) TD62M4600F 4-ch source driver, low-saturation type 10 −2.0 SSOP16 TD62M4601F 4-ch source driver, low-saturation type 20 −2.0 SSOP16 TD62M8500F 8-ch sink driver, low-saturation type 10 2.0 HSOP16 TD62M8501F 8-ch sink driver, low-saturation type 20 2.0 HSOP16 TD62M8600F 8-ch source driver, low-saturation type 10 −2.0 HSOP16 TD62M8601F 8-ch source driver, low-saturation type 20 −2.0 HSOP16 TD62M8603F 8-ch source driver, low-saturation type 30 −1.5 HSOP16 TD62M8604AF 8-ch source driver, low-saturation type 50 −2.0 HSOP16
LED Driver ICs (LED Panel Driver ICs) Part Number Package Use Structure TB62702P/F DIP20/SOP20 10-segment display 10-bit DMOS sink driver (SIPO, latch), 30 V/30 mA TB62705CP/ CF/CFN DIP16/SSOP16 Small LED panel 8-bit constant-current sink driver (SIPO, latch), 17 V/90 mA TB62706BN/ BF SDIP24N/SSOP24 Large LED panel 16-bit constant-current sink driver (SIPO, latch), 17 V/90 mA TB62707F SSOP24 Full-color LED panel 8-bit constant-current sink driver (PIPO, latch), 17 V/90 mA TB62708N SDIP30N Large LED panel 16-bit constant-current source driver (SIPO, latch), 17 V/ −90 mA TB62709N/F SDIP24N/SSOP24 7-segment display 4-digit 7-segment display (anode common) decoder + constant-current driver (SIPO),
17 V/50 mA, −400 mA/digit
TB62710P/F/FN DIP20/SSOP24/SSOP20 Small LED panel 8-bit constant-current source driver (SIPO, latch), 17 V/ −90 mA TB62713N/F SDIP24N/SSOP24 7 × 5 dot display 7 × 5 dot display (common cathode rows) decoder + constant-current driver (SIPO),
17 V/60 mA, −420 mA/digit
TB62715FN SSOP20 Small LED panel 8-bit constant-current sink driver (SIPO, latch), 17 V/150 mA TB62717N/F SDIP42N/QFP48 Full-color LED panel 24-bit constant-current sink driver (SIPO, latch), 17 V/50 mA TB62718AF HQFP64 Full-color LED panel PWM control 256-level gray scale + current compensation, 16-bit constant-current sink driver, 26 V/80 mA TB62719AF HQFP64 Full-color LED panel PWM control 256-level gray scale + current compensation, 16-bit constant-current sink driver, 26 V/80 mA (upward compatible with the TB62718AF) TB62725BP/ BF/BFN DIP16/SSOP16/SSOP16 Small LED panel 3.3-V to 5-V drive, 8-bit constant-current sink driver (SIPO, latch), 17 V/90 mA TB62726AN/ AF SDIP24N/SSOP24 Large LED panel 3.3-V to 5-V drive, 16-bit constant-current sink driver (SIPO, latch), 17 V/90 mA TB62727FN SSOP30 Full-color LED panel 16-bit constant-current sink driver with current compensate (SIPO, latch), 17 V/60 mA SIPO: Serial-in parallel-out PIPO: Parallel-in parallel-out Toshiba manufactures the products in bold in the factories in Malaysia and Thailand as well as in Japan. We ship the products from the factories for overseas assembly of end products. (White LED Driver ICs) Part Number Package Use Structure TB62731FUG TB62732FUG SOT23-6pin White color LED back light driver Constant current step-up DC/DC converter (output: 320 mW, efficiency: 80%, maximum output voltage: 30 V, maximum switching current: 0.3 A) TB62733FTG VQON24 White color LED back light driver Charge-pump type DC/DC converter (2ch output), output current: 200 mA TB62734FMG SON8 White color LED back light driver Constant current step-up DC/DC converter, efficiency: 85% (max), output: 600 mW, (with over voltage protection function) TB62735FTG QFN16 White color LED back light driver Charge-pump DC/DC converter + constant-current driver (4ch) TB62736FUG SOT23-6pin White color LED back light driver Constant current step-up DC/DC converter, efficiency: 85% (max) TB62737FUG SOT23-6pin White color LED back light driver Constant current step-up DC/DC converter, efficiency: 85% (max), (with over voltag e protection function) **: Under development CCD Clock Driver ICs (CCD Clock Driver ICs) Part Number Package Use Structure TB62801F HSOP16 CCD linear image sensor Linear CCD clock driver TB62802F HSOP16 CCD linear image sensor Linear CCD clock driver (EMI noise measures product) Thermal Head Driver ICs Part Number Package Device Type Structure TD62C805F QFP80 48-bit TPH driver 8-bit parallel input, 6-stage shift register latch drivers (30 V / 100 mA) TD62C851P DIP20 8-bit solenoid driver 8-bit shift register latch drivers (50 V / 200 mA) TD62C852P DIP20 8-bit solenoid driver 8-bit shift register latch drivers (50 V / 500 mA) TD62C854AF SSOP24 8-bit LED driver With Power ON Reset, 8-bit shift register latch drivers (50 V / 500 mA) TB62600F QFP100 64-bit TPH driver 8-bit parallel input, 8-stage (1 bit input, 64-stage) shift register latch drivers (30 V / 130 mA)
Vending Machine Driver ICs Part Number Package Use Structure TD62650F Power supply monitor level: 92% of 5 V or less Built-in resistor for reset timer TD62651F 5-V power supply and power supply monitor + 24-V communications interface IC Power supply monitor level: 85% of 5 V or less With external resistor for timer reset TD62652F SSOP30 (1.0 mm) Vending machine system driver Power supply monitor level: 92% of 5 V or less With external resistor for timer reset Other Driver ICs Part Number Package Use Structure TD62930P/F DIP16/SSOP16 (1.0 mm) IGBT gate driver for home appliances (inverters) 3-ch small-signal push-pull driver (30 V/ ± 100 mA) TD62C854F SSOP24 (1 mm) 8 outputs darlington driver TD62C854AF SSOP24 (1 mm) General purpose use 8 outputs darlington driver with Power ON Reset
Brush Motor Driver ICs (Bridge Driver ICs) Part Number Package Features TA7354P SIP9 I OUT = 0.2 A (avg), 0.6 A (peak), built-in diode, 4 modes TA7257P HSIP7 I OUT = 1.5 A (avg), 4.5 A (peak), built-in diode, 4 modes TA7267BP HSIP7 I OUT = 1.0 A (avg), 3.0 A (peak), built-in diode, 4 modes TA7279AP/P HDIP14 2-channel 4-mode driver, I OUT = 1.0 A (avg), 3.0 A (peak), built-in diode, built-in thermal shutdown circuit TA7288P HSIP10 Sequential dual driver with Vref, IOUT = 1.0 A (avg), 2.0 A (peak), built-in diode, 4 modes, built-in thermal shutdown circuit/output pin protection circuit, built-in shoot through current protection circuit, hysteresis for all inputs TA8400P DIP16 Sequential dual driver with Vref A and Vref B, IOUT = 1.0 A (peak), built-in diode, 4 modes, built-in thermal shutdown circuit, built-in shoot through current protection circuit, hysteresis for all inputs TA8405S SIP9 Sequential dual driver, IOUT = 1.0 A (peak), built-in diode, 4 modes, built-in thermal shutdown circuit, built-in shoot through current protection circuit, hysteresis for all inputs TA8409S SIP9 TA8409F SSOP10 4-mode driver, IOUT = 0.4 A (avg), 1.0 A (peak), VCC (max) = 25 V, built-in diode, built-in thermal shutdown circuit, built-in standby circuit, hysteresis for all inputs TA7291P HSIP10 4-mode driver, IOUT = 1.0 A (avg), 2.0 A (peak), built-in diode, with Vref, VCC (max) = 25 V (P)/30 V (AP), built-in thermal shutdown circuit/output pin protection circuit, built-in standby circuit, hysteresis for all inputs TA7291S SIP9 4-mode driver, IOUT = 0.4 A (avg), 1.2 A (peak), built-in diode, with Vref, VCC (max) = 25 V (S)/30 V (AS), built-in thermal shutdown circuit/output pin protection circuit, built-in standby circuit, hysteresis for all inputs TA7291F HSOP16 4-mode driver, IOUT = 0.4 A (avg), 1.2 A (peak), built-in diode, with Vref, VCC (max) = 25 V (F)/30 V (AF), built-in thermal shutdown circuit/output pin protection circuit, built-in standby circuit, hysteresis for all inputs TA8428K HSIP7 4-mode driver, I OUT = 1.5 A (avg), 3.0 A (peak), VCC (max) = 30 V, built-in diode, built-in thermal shutdown circuit/overcurrent protection circuit TA8428F HSOP20 4-mode driver, I OUT = 0.8 A (avg), 2.4 A (peak), VCC (max) = 30 V, built-in diode, built-in thermal shutdown circuit/overcurrent protection circuit TA8429H HZIP12 4-mode driver, I OUT = 3.0 A (avg), 4.5 A (peak), VCC (max) = 30 V, built-in thermal shutdown circuit/overcurrent protection circuit, HZIP power package TD62M4700F SSOP16 Ultra-low voltage, low-saturation voltage type, I OUT = 2.0 A TA7733F SSOP16 Low-voltage use (V CC (min) = 1.8 V), IOUT = 0.5 A, 4 modes, wide operating voltage range, can be used as interface driver, high-efficient drive TA8401F SSOP16 Low-voltage use (V CC (min) = 3.0 V), IOUT = 0.5 A, 4 modes, wide operating voltage range, can be used as interface driver, high-efficient drive TA8440H HZIP12 Bridge H switch 50 V, IOUT = 1.5 A (avg), 3.0 A (peak), driver with phase-chopper pin, 4 modes, built-in diode, built-in thermal shutdown circuit, CMOS compatible input TA8482FN SSOP30 Bridge driver + sensor amp in a single chip, VCC (min) = 2.7 V, IOUT = 0.6 A (peak), 4 modes, built-in current limiter, built-in thermal shutdown circuit, built-in tape top/end sensor amp TA8496FL QON24 Constant-current operation, IOUT = 20 mA, built-in low-noise high-gain amp, magnetic head read/write IC for cameras, writing and detecting of magnetic recording signals TB6501P DIP16 H switch 25 V with rotation detector, 1 A, with Vref, 4 modes, rotation detection using back-EMF, built-in thermal shutdo wn circuit, output voltage control TB6524FN SSOP16 2-channel driver, I OUT = 0.1 A, constant-current operation possible (VCC = 2.0 V to 7.0 V), 3 modes, built-in diode, Enable pin TB6549P/PG DIP16 TB6549F/FG HSOP20 PWM control bridge driver, IOUT (max) = 3.5 A, VCC (max) = 30 V, 4 modes, PWM control, standby function, built-in thermal shutdown (TSD) circuit/overcurrent protection circuit ** TB6549HQ HZIP25 PWM control bridge driver, IOUT (max) = 4.5 A, VCC (max) = 30 V, 4 modes, PWM control, standby function, built-in thermal shutdown (TSD) circuit/overcurrent protection circuit TB62300F HSOP-36-0.65 PWM chopper type, constant-current dual DC motor driver, 40 V/8.0 A (peak), 4 modes, constant-current PWM control, standby function, built-in thermal shutdown (TSD) circuit/overcurrent protection circuit TB6552FL/FLG QON24 2-ch PWM bridge driver, 1.5 V/0.8 A (peak), 4 modes, standby function, built-in thermal shutdown (TSD) circuit, direct PW M control TB6552FN/FNG SSOP16 2-ch PWM bridge driver, 1.5 V/0.8 A (peak), 4 modes, standby function, built-in thermal shutdown (TSD) circuit, direct P WM control TB6592FL/FLG QON24 2-ch PWM bridge driver, 6 V/0.8 A (peak), 4 modes, standby function, built-in thermal shutdown (TSD) circuit, direct PWM control * TB6555FLG QON36 4-ch PWM bridge driver, 15 V/0.8 A (peak), 4 modes, standby function, built-in thermal shutdown (TSD) circuit, direct PWM control * TB6595FLG QON36 4-ch PWM bridge driver, 6 V/0.8 A (peak), 4 modes, standby function, built-in thermal shutdown (TSD) circuit, direct PWM control TB6591FL/FLG QON48 7-ch PWM bridge driver (6-ch full-bridge driver + 1-ch constant-current bridge driver), 6.0 V/0.8 A (peak), 4 modes, output PWM control, standby function, built-in thermal shutdown (TSD) circuit TB6557FLG QON36 6-ch PWM bridge driver, 15 V/0.8 A (peak), 4 modes, standby function, built-in thermal shutdown (TSD) circuit, direct PWM control, built-in serial interface decoder with 6 bit EVR DAC, weight register TB6558FLG QON24 2-ch PWM chopper type, constant-current driver, 15 V/0.8 A (peak), 4 modes, constant-current PWM control, standby function, built-in thermal shutdown (TSD) circuit TB6561NG SDIP24 2-ch PWM bridge driver, 40 V/1.5 A (peak), 4 modes, on-chip VDD (5 V) regulator for internal circuit, constant-current PWM control, standby function, built-in thermal shutdown (TSD) circuit : Dry-packed product *: New product **: Under development
(Power Op-Amp) Maximum Ratings Circuit Part Number Package VCC (V) I O (A) Remarks TA7256P HSIP10 ±18 0.5 Internally phase-corrected type Dual TA7272P HSIP10 ±18 1.2 Internally phase-corrected type
Brushless Motor Driver ICs (3-phase Controllers/Drivers) Maximum Ratings Part Number Package IO (A) V O (V) Features TA7712P DIP20 0.025 8 TA7712F SSOP24 0.025 8 TA7713P DIP20 0.025 8 General-purpose motor driver, external transistor system, 3-phase full-wave driver, rotation signal output function, brake function TB6539N SDIP24 0.02 18 TB6539F SSOP30 0.02 18 TB6551F SSOP24 0.002 12 3-phase full-wave sine-wave current PWM controller TB6556F SSOP30 0.002 12 3-phase full-wave sine-wave current PWM controller, automatic lead angle control * TB6581HG HZIP25 2.0 500 3-phase full-wave sine-wave PWM brushless driver, multi-chip package of sine-wave controller and TPD4103AK TA7259P HDIP14 1.2 26 TA7259P(LB) HSOP14 1.2 26 TA7259F HSOP20 1.2 26 3-phase full-wave driver, current control type TA7262P HDIP14 1.5 25 TA7262P(LB) HSOP14 1.5 25 TA7262F HSOP20 1.5 25 3-phase full-wave driver, voltage control type TA7736P DIP16 1.0 26 TA7736F HSOP16 1.0 26 3-phase full-wave driver, current control type TA7745P DIP16 1.0 18 TA7745F SSOP16 1.0 18 3-phase full-wave/half-wave driver, voltage control type, suitable for low-voltage use TA8416F SSOP16 0.7 8 3-phase full-wave/half-wave driver, suitable for low-voltage use, 2 hall sensor drive TA8423P DIP16 1.2 18 TA8423F HSOP16 1.2 18 3-phase full-wave driver, 1-terminal input control, current control type, built-in reference voltage circuit for control amp TA8424F HSOP20 1.2 18 3-phase full-wave driver, Low-noise drive, built-in FG amp TA8463F HQFP30 0.6 8 3-phase full-wave driver, digital servo, Low-noise drive, built-in index amp TA8466AF HSOP16 0.7 18 3-phase full-wave driver, 1-terminal input control, Low-noise drive, semi-linear type, reduced external parts TA8470AF HSOP20 1.2 18 Low-noise drive, built-in FG amp TA8483CP HDIP14 2.0 35 3-phase full-wave driver, PWM sensorless drive with the TB6520P TA84005F SSOP30 1.0 25 3-phase full-wave driver, PWM sensorless drive with the TB6548F TA84006F SSOP30 1.0 25 3-phase full-wave driver TA8486F SSOP24 2.0 15 Low-saturation voltage multi-chip transistor array, 3-phase + H bridge TA8490AF SSOP30 1.2 16 CD-ROM spindle motor driver TA8492P DIP16 1.5 20 3-phase full-wave driver, voltage control type TA8493F SSOP30 1.2 16 TA8493AF SSOP30 1.2 16 TA8493BF SSOP30 1.2 16 TA8499F SSOP30 1.2 16 CD-ROM spindle motor driver, direct PWM control system TB6519F QFP64 (0.5 mm) 0.01 14 Movie cylinder motor and capstan motor controller TB6525F QFP64 (0.5 mm) 0.015 8 Movie cylinder motor and loading motor controller TB6534F QFP64 (0.5 mm) 0.01 12 Movie cylinder motor and capstan motor controller TB6520P DIP16 0.0002 7 PWM type, sensorless motor controller, V CC = 5 V, with TA8483CP TB6537P/F DIP18/SSOP24 0.02 5.5 PWM type, sensorless motor controller, V CC = 5 V, external transistor system TB6548F SSOP24 0.02 5.5 PWM type, sensorless motor controller, V CC = 5 V, with TA84005F * TB6575FNG SSOP24 (0.65 mm) 0.02 5.5 PWM type, sensorless motor controller, analog speed control input, function to improve startup : Dry-packed product *: New product (2-phase Fan Driver Controllers) Maximum Ratings Part Number Package IO (A) V O (V) Features TA8420AF SSOP10 2.0 15 Fan motor driver, with FG output TA8421AF SSOP10 2.0 15 Fan motor driver, with motor status detection pin TA8462F SSOP10 1.5 15 Fan motor driver, with FG output and motor status detection pin TA8473F SSOP16 1.2 13.8 TA8473FN SSOP16 (0.65 mm) 1.2 13.8 Fan motor driver, variable speed type, with radio noise reduction pin
Stepping Motor Driver ICs (Bipolar) Maximum Ratings Part Number Package IO (A) V O (V) Features TA8411L HDIP24 0.8 30 TB6500AH HZIP25 0.8 30 Serial input system driver for fax machines and printers TA8435H HZIP25 1.5 40 Pseudo sine-wave drive (PWM chopper type), reset and monitor pins, built-in micro-step decoder, clock input TB62201AF HSOP-36-0.65 1.5 40 Pseudo sine-wave drive (PWM chopper type), dual-stepping motor driver TB62202AFG HSOP-36-0.65 1.0 40 Pseudo sine-wave drive (PWM chopper type), dual-stepping motor driver TB62205FG HSOP-36-0.65 0.7 30 Built-in 2-ch step-down DC/DC converter, pseudo sine-wave drive (PWM chopper type), on-chip V DD(5 V) regulator for internal circuit TB62206FG HSOP20-1.00 1.8 40 PWM chopper type, phase input, 2-phase/1-2 phase excitation * TB62207BFG HSOP-36-0.65 8.0 37 Pseudo sine-wave drive (PWM chopper type), dual-stepping motor driver Built-in 2-ch step-down DC/DC converter, on-chip VDD(5 V) regulator for internal circuit TB62209FG HSOP-36-0.65 1.8 40 Pseudo sine-wave drive (PWM chopper type), built-in micro-step decoder, clock input TB62217AFG THQFP64 8.0 50 Pseudo sine-wave drive (PWM chopper type), dual-stepping motor driver Built-in 3-ch step-down DC/DC converter, on-chip VDD(5 V) regulator for internal circuit TB6504F SSOP24 0.15 18 Pseudo sine-wave drive (PWM chopper type), reset and monitor pins, built-in micro-step decoder, clock input TB6512AF SSOP24 0.12 12 Pseudo sine-wave drive (PWM chopper type), reset and monitor pins TB6526AF SSOP24 0.12 10 Pseudo sine-wave drive (PWM chopper type), reset and monitor pins, built-in micro-step decoder, external PNP tra nsistor TA8430AF HSOP16 0.6 8 2-phase bipolar stepping motor driver, with Enable and output voltage adjustment pins TA84002F HSOP20 1.0 35 Bipolar PWM chopper type, phase input, 2-phase/1-2 phase excitation TA7289P HDIP14 1.5 30 TA7289F HSOP20 0.7 30 Bipolar PWM chopper type, built-in 4-bit DA conversion TA7774P DIP16 0.4 17 TA7774F HSOP16 0.4 17 2-phase bipolar drive, switchable power supply system TB6598FNG SSOP16 0.8 15 PWM chopper type, phase input, 2-phase/1-2 phase excitation ** TB6562ANG SDIP24 1.5 40 PWM chopper type, phase input, 2-phase/1-2 phase excitation, on-chip V DD (5 V) regulator for internal circuit : Dry-packed product *: New product **: Under development (Unipolar) Maximum Ratings Part Number Package IO (A) V O (V) Features TD62064AP/AF DIP16/HSOP16 1.5 50 NPN darlington transistor array containing 4 circuits, with clamp diode, active-High TD62064BP-1/BF DIP16/HSOP16 1.5 80 NPN darlington transistor array containing 4 circuits, with clamp diode, active-High TD62107P DIP16 0.75 45 NPN darlington transistor array containing 4 circuits, with clamp diode and Enable pin TD62164AP/AF DIP16/HSOP16 0.7 50 NPN single transistor array containing 4 circuits, with clamp diode, active-High TD62164BP/BF DIP16/HSOP16 0.7 80 NPN single transistor array containing 4 circuits, with clamp diode, active-High TD62308AP/AF DIP16/HSOP16 1.5 50 NPN darlington transistor array containing 4 circuits, with clamp diode, active-Low TD62308BP-1/BF DIP16/HSOP16 1.5 80 NPN darlington transistor array containing 4 circuits, with clamp diode, active-Low TD62318AP/AF DIP16/HSOP16 0.7 50 NPN single transistor array containing 4 circuits, with clamp diode, active-Low TD62318BP/BF DIP16/HSOP16 0.7 80 NPN single transistor array containing 4 circuits, with clamp diode, active-Low TA8415P DIP16 0.4 28 Capable of 1-phase, 2-phase and 1-2 phase excitation of 3-phase/4-phase motors, unipolar system, clock input (5-phase Controller) Maximum Ratings Part Number Package IO (A) V O (V)
Features
TB6528P DIP24 0.03 20 5-phase universal controller
Point Regulators (LDO Regulators) Point regulators are small regulator ICs which can be individually assigned to circuit blocks as necessary. These devices incor porate an ON/OFF control function, which facilitates power management. < Features >
- Small package • Built-in ON/OFF control function
- Low saturation voltage • Built-in overtemperature and overcurrent protection circuits
- Low noise • Capable to use a ceramic capacitor
- High ripple rejection < Low-Dropout Voltage Regulator Series > (Single Output Type) Part Number Rating 2.1 2.0
1.7 UFV
2.8 2.9
1.6 SMV
2.8 2.9 (V) (mm) (mm) (mm) Output Current (mA) Power Dissipation♦ (mW)
1.5 TAR5S15U TAR5S15 TAR5SB15
1.6 TAR5S16U TAR5S16 TAR5SB16
1.7 TAR5S17U TAR5S17 TAR5SB17
1.8 TAR5S18U TAR5S18 TAR5SB18
1.9 TAR5S19U TAR5S19 TAR5SB19
2.0 TAR5S20U TAR5S20 TAR5SB20
2.1 TAR5S21U TAR5S21 TAR5SB21
2.2 TAR5S22U TAR5S22 TAR5SB22
2.3 TAR5S23U TAR5S23 TAR5SB23
2.4 TAR5S24U TAR5S24 TAR5SB24
2.5 TAR5S25U TAR5S25 TAR5SB25
2.6 TAR5S26U TAR5S26 TAR5SB26
2.7 TAR5S27U TAR5S27 TAR5SB27
2.8 TAR5S28U TAR5S28 TAR5SB28
2.9 TAR5S29U TAR5S29 TAR5SB29
3.0 TAR5S30U TAR5S30 TAR5SB30
3.1 TAR5S31U TAR5S31 TAR5SB31
3.2 TAR5S32U TAR5S32 TAR5SB32
3.3 TAR5S33U TAR5S33 TAR5SB33
3.4 TAR5S34U TAR5S34 TAR5SB34
3.5 TAR5S35U TAR5S35 TAR5SB35
3.6 TAR5S36U TAR5S36 TAR5SB36
3.7 TAR5S37U TAR5S37 TAR5SB37
3.8 TAR5S38U TAR5S38 TAR5SB38
3.9 TAR5S39U TAR5S39 TAR5SB39
4.0 TAR5S40U TAR5S40 TAR5SB40
4.1 TAR5S41U TAR5S41 TAR5SB41
4.2 TAR5S42U TAR5S42 TAR5SB42
4.3 TAR5S43U TAR5S43 TAR5SB43
4.4 TAR5S44U TAR5S44 TAR5SB44
4.5 TAR5S45U TAR5S45 TAR5SB45
4.6 TAR5S46U TAR5S46 TAR5SB46
4.7 TAR5S47U TAR5S47 TAR5SB47
4.8 TAR5S48U TAR5S48 TAR5SB48
4.9 TAR5S49U TAR5S49 TAR5SB49
5.0 TAR5S50U TAR5S50 TAR5SB50
(UFV) 380 (SMV) Pin Configuration IN OUT CONTROL GND NOISE OUT NOISE IN GND CONTROL ♦: A result of an evaluation on a glass-epoxy board. (30 mm × 30 mm), Ta = 25°C Please ask your local retailer about the devices with other output voltage. Single output power supply TAR5S series TAR5SB series TAR5S**U series Dual output power supply TAR8H series TAR8D series
(Dual Output Type) Description Part Number Output Voltage (V) Output Current (mA) Power Dissipation♦ Internal Connection Package Ach 2.8 100 TAR8H01K Bch 3.0 150 Ach 2.8 100 TAR8H02K Bch 2.8 150 Ach 2.5 100 TAR8H03K Bch 2.8 150 Ach 2.5 100 TAR8H04K Bch 3.0 150 Ach 1.8 100 TAR8H05K Bch 2.8 150 Ach 1.5 100 Synchronous switch type TAR8H06K Bch 2.5 150 1. CONTROL 2. Noise(A) 3. Noise(B) 4. GND 5. V OUT(B) 6. VIN(B) 7. VIN(A) 8. VOUT(A) Ach 2.5 TAR8D01K Bch 2.8 Ach 2.0 TAR8D02K Bch 2.8 Ach 2.8 TAR8D03K Bch 3.0 Ach 1.5 TAR8D04K Bch 1.5 Ach 2.8 TAR8D05K Bch 2.8 Ach 2.9 TAR8D06K Bch 2.9 Ach 3.0 TAR8D07K Bch 3.0 Ach 2.8 Independent control type * TAR8D08K Bch 2.85 100 400 1. Noise(A) 2. Noise(B) 3. CONTROL(A) 4. GND 5. CONTROL(B) 6. V OUT(B) 7. VIN 8. VOUT(A) 2.0mm 2.3mm US8 8765 1234 3.1mm ♦: A result of an evaluation on a glass-epoxy board. (30 mm × 30 mm), Ta = 25°C *: New product
Polarity Part Number Use/Function Output Voltage (typ.) (V) Output Current (max) (mA) Input Voltage (max) (V) Drop-out Voltage (typ.) (V) Bias Current (typ.) (mA) Output Voltage Tolerance (%) Power Dissipation (W) Package Equivalent TA7805F 5 4.2 TA78057F 5.7 TA7806F 6 TA7807F 7 TA7808F 8 TA7809F 9 TA7810F 10 TA7812F 12 4.3 TA7815F 15 4.4 TA7818F 18 4.5 TA7820F 20 TA7824F High-current output Surface-mount PW-MOLD package 1000 2.0 (IO = 1000 mA) 4.6 (Tj = 25°C) 1.0 (Ta = 25°C) (Tc = 25°C) PW-MOLD 78XX TA7805S 5 4.2 TA78057S 5.7 TA7806S 6 TA7807S 7 TA7808S 8 TA7809S 9 TA7810S 10 TA7812S 12 4.3 TA7815S 15 4.4 TA7818S 18 4.5 TA7820S 20 TA7824S High-current output Isolation package 1000 2.0 (IO = 1000 mA) 4.6 (Tj = 25°C) 2.0 (Ta = 25°C) (Tc = 25°C) TO-220(NIS) 78XX TA7805SB 5 4.2 TA78057SB 5.7 TA7806SB 6 TA7807SB 7 TA7808SB 8 TA7809SB 9 TA7810SB 10 TA7812SB 12 4.3 TA7815SB 15 4.4 TA7818SB 18 4.5 TA7820SB 20 TA7824SB High-current output Radial tape packing for automatic mounting 1000 2.0 O = 1000 mA) 4.6 (Tj = 25°C) 1.8 (Ta = 25°C) TPL 78XX TA78033LF 3.3 TA7804LF 4 TA7805LF 5 TA7807LF 7 TA7808LF 8 TA7809LF High-current output Surface-mount PW-MOLD package 1000 20 2.0 (IO = 1000 mA) 3.0 ±3 (Tj = 25°C) 1.0 (Ta = 25°C) (Tc = 25°C) PW-MOLD 78XX TA78033LS 3.3 TA7804LS 4 TA7805LS 5 TA7807LS 7 TA7808LS 8 TA7809LS High-current output Isolation package 1000 20 2.0 (IO = 1000 mA) 3.0 ±3 (Tj = 25°C) 2.0 (Ta = 25°C) (Tc = 25°C) TO-220(NIS) 78XX TA78M05F 5 TA78M06F 6 4.5 TA78M08F 8 TA78M09F 9 4.6 TA78M10F 10 4.7 TA78M12F 12 TA78M15F 15 TA78M18F 18 4.8 TA78M20F 20 4.9 Positive-voltage output TA78M24F Medium-current output Surface-mount PW-MOLD package 500 1.7 (IO = 350 mA) 5.0 (Tj = 25°C) 1.0 (Ta = 25°C) (Tc = 25°C) PW-MOLD 78MXX
Polarity Part Number Use/Function Output Voltage (typ.) (V) Output Current (max) (mA) Input Voltage (max) (V) Drop-out Voltage (typ.) (V) Bias Current (typ.) (mA) Output Voltage Tolerance (%) Power Dissipation (W) Package Equivalent TA78M05S 5 TA78M06S 6 4.5 TA78M08S 8 TA78M09S 9 4.6 TA78M10S 10 4.7 TA78M12S 12 TA78M15S 15 TA78M18S 18 4.8 TA78M20S 20 4.9 TA78M24S Medium-current output Isolation package 500 1.7 (IO = 350 mA) 5.0 (Tj = 25°C) 2.0 (Ta = 25°C) (Tc = 25°C) TO-220(NIS) 78MXX TA78M05SB 5 TA78M06SB 6 4.5 TA78M08SB 8 TA78M09SB 9 4.6 TA78M10SB 10 4.7 TA78M12SB 12 TA78M15SB 15 TA78M18SB 18 4.8 TA78M20SB 20 4.9 TA78M24SB Medium-current output Radial tape packing for automatic mounting 500 1.7 O = 350 mA) 5.0 (Tj = 25°C) 1.8 (Ta = 25°C) TPL 78MXX TA78L005AP 5 TA78L006AP 6 TA78L007AP 7 TA78L075AP 7.5 TA78L008AP 8 3.1 TA78L009AP 9 TA78L010AP 10 TA78L012AP 12 TA78L132AP 13.2 3.2 TA78L015AP 15 TA78L018AP 18 TA78L020AP 20 3.3 TA78L024AP Low-current output Radial tape packing for automatic mounting 150 1.7 (IO = 150 mA) 3.5 (Tj = 25°C) 0.8 (Ta = 25°C) TO-92MOD 78LXX TA78L05F 5 TA78L06F 6 TA78L07F 7 TA78L08F 8 3.1 TA78L09F 9 TA78L10F 10 TA78L12F 12 3.2 TA78L15F 15 TA78L18F 18 TA78L20F 20 3.3 TA78L24F Low-current output Surface-mount PW-MINI (SOT-89) package 150 1.7 O = 150 mA) 3.5 (Tj = 25°C) 0.5 (Ta = 25°C) PW-MINI (SOT-89) 78LXX TA78L05PF 5 TA78L06PF 6 TA78L07PF 7 TA78L08PF 8 3.1 TA78L09PF 9 TA78L10PF 10 TA78L12PF 12 TA78L15PF Low-current output Small thin surface-mount PS-8 package 150 35 2.0 (IO = 150 mA) 3.2 (Tj = 25°C) 1.3 (Ta = 25°C) Mounted on glass-epoxy substrate PS-8 78LXX TA78L05S 5 TA78L07S 7 TA78L08S 8 3.1 TA78L09S 9 TA78L10S 10 TA78L12S 12 3.2 Positive-voltage output TA78L15S Low-current output Radial tape packing for automatic mounting 100 35 1.7 O = 100 mA) 3.3 (Tj = 25°C) 0.6 (Ta = 25°C) TO-92 78LXX
Series Regulators (continued) Polarity Part Number Use/Function Output Voltage (typ.) (V) Output Current (max) (mA) Input Voltage (max) (V) Drop-out Voltage (typ.) (V) Bias Current (typ.) (mA) Output Voltage Tolerance (%) Power Dissipation (W) Package Equivalent TA48015F 1.5 0.8 Max TA48018F 1.8 TA4802F 2 TA48025F 2.5 TA4803F 3 TA48033F 3.3 TA4805F High-current output Low drop-out Surface-mount PW-MOLD package 1000 16 0.5 Max O = 500 mA) 0.8 (IO = 0 A) ±4.5 (Tj = 0 to 125°C) 1.0 (Ta = 25°C) (Tc = 25°C) PW-MOLD TA48018S 1.8 TA4802S 2 TA48025S 2.5 TA4803S 3 TA48033S 3.3 TA4805S High-current output Low drop-out Isolation package 1000 16 0.5 Max (IO = 500 mA) 0.8 (IO = 0 A) ±4.5 (Tj = 0 to 125°C) 2.0 (Ta = 25°C) (Tc = 25°C) TO-220(NIS) TA48015AF 1.5 0.8 Max TA48018AF 1.8 TA48025AF 2.5 TA48033AF 3.3 TA4805AF 5 TA4809AF High-current output Low drop-out Surface-mount PW-MOLD package 1000 16 0.5 Max O = 500 mA) 0.8 (IO = 0 A) (Tj = 0 to 125°C) 1.0 (Ta = 25°C) (Tc = 25°C) PW-MOLD TA48015AS 1.5 0.8 Max TA48018AS 1.8 TA48025AS 2.5 TA48033AS 3.3 TA4805AS 5 TA4809AS High-current output Low drop-out Isolation package 1000 16 0.5 Max (IO = 500 mA) 0.8 (IO = 0 A) (Tj = 0 to 125°C) 2.0 (Ta = 25°C) (Tc = 25°C) TO-220(NIS) TA48M025F 2.5 TA48M03F 3 TA48M033F 3.3 TA48M0345F 3.45 0.8 TA48M04F 4 0.9 TA48M05F Medium-current output Low drop-out Surface-mount PW-MOLD package 500 29 0.65 Max (IO = 500 mA) 1.0 (IO = 0 A) (Tj = 0 to 125°C) 1.0 (Ta = 25°C) (Tc = 25°C) PW-MOLD TA78DM05S 5 0.8 TA78DM08S 8 TA78DM09S 9 0.9 TA78DM12S Medium-current output Low drop-out Isolation package 12 500 29 (load dump = 60 V)
0.75 Max
(IO = 500 mA) 1.0 (IO = 0 A) (Tj = 25°C) 2.0 (Ta = 25°C) (Tc = 25°C) TO-220(NIS) TA58L05F 5 0.45 TA58L06F 6 0.5 TA58L08F 8 0.55 TA58L09F 9 0.6 TA58L10F 10 0.6 TA58L12F 12 0.65 ** TA58L15F Medium-current output Low drop-out Surface-mount PW-MOLD package 250 29 (load dump = 60 V)
0.4 Max
O = 200 mA) 0.75 (IO = 0 A) (Ta = −40 to 105°C) 1.0 (Ta = 25°C) (Tc = 25°C) PW-MOLD TA58L05S 5 0.45 TA58L06S 6 0.5 TA58L08S 8 0.55 TA58L09S 9 0.6 TA58L10S 10 0.6 TA58L12S 12 0.65 Positive-voltage output (low dropout) TA58L15S Medium-current output Low drop-out Isolation package 250 29 (load dump = 60 V) O = 200 mA) 0.75 (IO = 0 A) (Ta = −40 to 105°C) 2.0 (Ta = 25°C) (Tc = 25°C) TO-220(NIS) **: Under development
Polarity Part Number Use/Function Output Voltage (typ.) (V) Output Current (max) (mA) Input Voltage (max) (V) Drop-out Voltage (typ.) (V) Bias Current (typ.) (mA) Output Voltage Tolerance (%) Power Dissipation (W) Package Equivalent TA48L018F 1.8 TA48L02F 2 TA48L025F 2.5 TA48L03F 3 TA48L033F 3.3 TA48L05F Low-current output Low drop-out Surface-mount PW-MINI (SOT-89) package 150 16 0.5 Max (IO = 100 mA) 0.4 (IO = 0 A) (Tj = 0 to 125°C) 0.5 (Ta = 25°C) PW-MINI (SOT-89) TA78DS05BP 5 TA78DS05CP 5 TA78DS06BP 6 0.6 TA78DS08BP 8 TA78DS09BP 9 TA78DS10BP 10 0.7 TA78DS12BP 12 0.8 TA78DS15BP Low-current output Low drop-out Radial tape packing for automatic mounting 30 29 (load dump = 60 V)
0.3 Max
O = 10 mA) 1.0 (IO = 0 A) BP: ±10 CP: ±5 (Ta = −40 to 85°C) 0.8 (Ta = 25°C) TO-92MOD TA78DS05F 5 TA78DS05AF 5 TA78DS06F 6 0.6 TA78DS08F 8 TA78DS09F 9 TA78DS10F 10 0.7 TA78DS12F 12 0.8 Positive-voltage output (low dropout) TA78DS15F Low-current output Low drop-out Surface-mount PW-MINI (SOT-89) package 30 29 (load dump = 60 V) O = 10 mA) 1.0 (IO = 0 A) F: ±10 AF: ±5 (Ta = −40 to 85°C) 0.5 (Ta = 25°C) PW-MINI (SOT-89) TA79005S −5 TA79006S −6 TA79007S −7 TA79008S −8 TA79009S −9 4.3 TA79010S −10 TA79012S −12 TA79015S −15 −35 4.4 TA79018S −18 4.5 TA79020S −20 TA79024S High-current output Isolation package −24 1000 −40 2.0 (IO = 1.0 A) 4.6 (Tj = 25°C) 2.0 (Ta = 25°C) (Tc = 25°C) TO-220(NIS) 79XX TA79005SB −5 TA79006SB −6 TA79007SB −7 TA79008SB −8 TA79009SB −9 4.3 TA79010SB −10 TA79012SB −12 TA79015SB −15 −35 4.4 TA79018SB −18 4.5 TA79020SB −20 TA79024SB High-current output Radial tape packing for automatic mounting −24 1000 −40 2.0 O = 1.0 A) 4.6 (Tj = 25°C) 1.8 (Ta = 25°C) TPL 79XX TA79L05F −5 TA79L06F −6 TA79L08F −8 3.1 TA79L09F −9 TA79L10F −10 TA79L12F −12 3.2 TA79L15F −15 −35 TA79L18F −18 TA79L20F −20 3.3 TA79L24F Low-current output Surface-mount PW-MINI (SOT-89) package −24 150 −40 1.7 O = 40 mA) 3.5 (Tj = 25°C) 0.5 (Ta = 25°C) PW-MINI (SOT-89) 79LXX TA79L005P −5 TA79L006P −6 TA79L008P −8 3.1 TA79L009P −9 TA79L010P −10 TA79L012P −12 3.2 TA79L015P −15 −35 TA79L018P −18 TA79L020P −20 3.3 Negative-voltage output TA79L024P Low-current output Radial tape packing for automatic mounting −24 150 −40 1.7 O = 40 mA) 3.5 (Tj = 25°C) 0.8 (Ta = 25°C) TO-92MOD 79LXX
Polarity Part Number Use/Function Reference Voltage (typ.) (V) Output Voltage (typ.) (V) Cathode Current (max) (mA) Cathode Voltage (max) (V) Minimum Cathode Current (max) (mA) Reference Voltage Tolerance (%) Power Dissipation (W) Package Equivalent TA76431F/FR Variable output voltage Surface-mount PW-MINI (SOT-89) package 0.5 (Ta = 25°C) PW-MINI (SOT-89) 431 TA76431S Variable output voltage Radial tape packing for automatic mounting
2.495 Variable
2.495 to 36 Sink 150 37 1.0 ±2.2 (Ta = 25°C) 0.8 (Ta = 25°C) TO-92MOD 431 TA76L431FT Variable output voltage Small thin surface-mount UFV package 0.45 (Ta = 25°C) Mounted on glass-epoxy substrate UFV 431 TA76L431S Variable output voltage Radial tape packing for automatic mounting
2.49 Variable
2.49 to 19 Sink 50 20 0.5 ±1.0 (Ta = 25°C) 0.8 (Ta = 25°C) TO-92MOD 431 TA76432FT TA76432AFT Variable output voltage Small thin surface-mount UFV package 0.45 (Ta = 25°C) Mounted on glass-epoxy substrate UFV TA76432FC Variable output voltage Surface-mount SMV package 0.38 (Ta = 25°C) Mounted on glass-epoxy substrate SMV TA76432F/FR TA76432AF/AFR Variable output voltage Surface-mount PW-MINI (SOT-89) package 0.5 (Ta = 25°C) PW-MINI (SOT-89) TA76432S TA76432AS Variable output voltage Radial tape packing for automatic mounting
1.26 Variable
1.26 to 19 Sink 20 20 0.4 ±1.4 A: ±1.0 (Ta = 25°C) 0.8 (Ta = 25°C) TO-92MOD Positive-voltage output TA76433FC Cathod separation type Variable output voltage Surface-mount SMV package 1.26 to 14 Sink 20 15 0.4 ±1.4 (Ta = 25°C) 0.38 (Ta = 25°C) Mounted on glass-epoxy substrate SMV Multi-Functional Regulators Polarity Part Number Use/Function Output Voltage (typ.) (V) Output Current (max) (mA) Input Voltage (max) (V) Drop-out Voltage (typ.) (V) Bias Current (typ.) (mA) Output Voltage Tolerance (%) Power Dissipation (W) Package Equivalent TA48S018F 1.8 TA48S02F 2 TA48S025F 2.5 TA48S03F 3 TA48S033F 3.3 TA48S05F High-current output Low drop-out Built-in ON/OFF control function Bias current (OFF): 5 µA (max) Surface-mount 5-pin PW-MOLD package 5 1000 16 0.5 Max O = 500 mA) 0.8 (IO = 0 A) ±4.5 (Tj = 0 to 125°C) 1.0 (Ta = 25°C) (Tc = 25°C) PW-MOLD 5 pin Positive-voltage output (low dropout) TA8004SA Medium-current output Built-in power-on reset timer function Low drop-out 5 400 29 (load dump = 60 V)
0.6 Max
O = 400 mA) 3.0 (IO = 0 A) (Ta = −40 to 85°C) 2.0 (Ta = 25°C) (Tc = 25°C) TO-220N(IS) 5 pin
Part Number Package Use Functions/Features Operating Supply Voltage Range TA1294N/F P-SDIP24-300-1.78 P-SSOP24-300-1.78 Power factor correction + PWM control, fH = 30 kHz to 110 kHz Can be used for both flyback (external synchronization) and half-bridge converters. 7.0 to 14.0 V TA1307P P-DIP8-300-2.54A Reduced standby power consumption by intermittent control, f H = 20 kHz to 150 kHz 7.5 to 11.5 V TA1319AP/AF P-DIP8-300-2.54A P-SOP8-225-1.27 PWM control (for power supply at 50 W or less), AC wide input voltage, automatic frequency reduction at standby mode 9.5 to 24.0 V TA1361P/F P-DIP8-300-2.54A P-SOP8-225-1.27 RCC control (for power supply at 140 W or less), AC wide input voltage, automatic frequency reduction at standby mode 9.0 to 23.5 V TC90A75P/F DIP8-C-300A DIP8-F-255C AC/DC switching power supply control AC transformer control, reduced standby power consumption to maximum by intermittent control 8.5 to 14.0 V : Under development Other Power Supply ICs Part Number Package Use Structure * TB62501F VQFP64 Power supply monitor + controller for notebook PCs Power management IC for notebook PCs TB62503FM SON8 Step-down power supply Step-down DC/DC converter, 1.3-V output, efficiency = 85% * TB62504FMG SON8 System power supply for cellular phone PAs Step-down DC/DC converter (variable output) + switching MOSFET, output current capability 300 mA TB6807F VQFP64 Power supply monitor + controller for notebook PCs Power management IC for notebook PCs TB6808F VQFP64 Power supply monitor + controller for notebook PCs Power management IC for notebook PCs TB62507FMG SON8 System power supply for cellular phone PAs Step-down DC/DC converter (variable output) + switching MOSFET, output current capability 500 mA TB62505FTG VQON24 System power supply for cellular phone PAs Step-down DC/DC converter (variable output) + switching MOSFET, output current capability 500 mA + reference regulater (285 V) *: New product **: Under development
Small-Signal MMICs (High-Frequency Cell-pack) Wide Band Amplifiers Part Number Package Structure Applications Electrical Characteristics (Ta = 25°C) TA4000F SM6 Bipolar linear wideband amp BS tuners, communications equipment, VHF/UHF amps B/W = 1.3 GHz Gp = 15dB @f = 400 MHz, VCC = 5 V TA4001F SMQ Bipolar linear wideband amp BS tuners, communications equipment, VHF/UHF amps B/W = 2.4 GHz Gp = 12.5dB @f = 500 MHz, VCC = 5 V TA4002F SMQ Bipolar linear wideband amp BS tuners, communications equipment, VHF/UHF amps B/W = 1.3 GHz Gp = 23dB @f = 500 MHz, VCC = 5 V TA4004F SMV Bipolar linear wideband amp Communications equipment, VHF/UHF amps B/W = 1.2 GHz Gp = 10.5dB @f = 500 MHz, VCC = 2 V TA4011AFE ESV Bipolar linear wideband amp Communications equipment, UHF amp B/W = 2.4 GHz, P01dB = −6dBmW @VCC = 2 V TA4011FU USV Bipolar linear wideband amp Communications equipment, UHF amp B/W = 2.4 GHz, P01dB = −6dBmW @VCC = 2 V TA4012AFE ESV Bipolar linear wideband amp Communications equipment, UHF amp B/W = 2.0 GHz, P01dB = 0dBmW @VCC = 2 V TA4012FU USV Bipolar linear wideband amp Communications equipment, UHF amp B/W = 2.0 GHz, P01dB = 0dBmW @VCC = 2 V TA4016AFE ES6 Bipolar linear wideband amp Communications equipment, UHF amp B/W = 3.2 GHz Gp = 19dB @f = 1.5 GHz, VCC = 2 V TA4017FT TU6 Bipolar differential amp CATV, IF amp |S21| = 13dB, P01dB = 2dBmW @VCC = 5 V, f = 45 MHz TA4018F SM8 Bipolar differential gain control amp CATV, IF variable amp |S21| = 11dB, GR = 37dB @VCC = 5 V, f = 45 MHz TA4019F SM8 Bipolar differential amp CATV, IF amp |S21| = 30dB, IM3 = 53dB @VCC = 5 V, f = 45 MHz, Pin = −35dBmW Frequency Converters Part Number Package Structure Applications Electrical Characteristics (Ta = 25°C) TA4107F SM8 Bipolar linear down converter CATV analog digital tuner C・Gain = −0.5dB, IIP3 = 12dBmW @fRF = 1 GHz, fLO = 950 MHz, VCC = 4.5 V TA4303F SSOP-20 Bipolar linear down converter, Si-MMIC BS tuner OSC + DBC + IF C・Gain = 18dB/1.6 GHz, IP3 = 17dBmW VCC = 5 V, ICC = 74 mA High-Frequency Oscillators (VCO, TCXO) Part Number Package Structure Applications Electrical Characteristics (Ta = 25°C) TA4014FT TU6 Bipolar linear OSC & buffer TCXO VCXO TA4014FE ES6 Bipolar linear OSC & buffer TCXO VCXO TA4014FC CS6 Bipolar linear OSC & buffer TCXO VCXO ICC = 1.2 mA @VCC = 3.0 V VOSC = 1.2 Vp-p (reference value) TA4015FT TU6 Bipolar linear OSC & buffer TCXO VCXO TA4015FE ES6 Bipolar linear OSC & buffer TCXO VCXO ICC = 1.3 mA @VCC = 3.0 V VOSC = 1.2 Vp-p (reference value) * TA4203F QS16 Bipolar linear OSC & buffer & SW GSM/DCS VCO ICC = 40 mA @VCC = 2.7 V PO = +10dBmW * TA4205FC CS6 Bipolar linear OSC & buffer VCO ICC = 8 mA @VCC = 2.7 V VOSC = 0.63 Vp-p (reference value) *: New product
Part Number Package Structure Applications Electrical Characteristics (Ta = 25°C) TG2210FT TU6 GaAs low-power SPDT switch RF general-purpose SPDT switch, bluetooth LOSS = 0.4dB, ISL = 30dB Pi1dB = 18dBmW (min) @f = 1 GHz, VC = 0 V/2.5 V TG2211FT TU6 GaAs low-power SPDT switch, built-in inverter RF general-purpose SPDT switch, bluetooth LOSS = 0.55dB, ISL = 17dB Pi1dB = 22dBmW @f = 2.5 GHz, VC = 0 V/2.7 V TG2213S sES6 GaAs low-power SPDT switch, small type RF general-purpose SPDT switch, bluetooth LOSS = 0.45dB, ISL = 22dB Pi1dB = 17dBmW @f = 2.5 GHz, VC = 0 V/2.7 V TG2214S sES6 GaAs low-power SPDT switch, small type Reverse logic type of TG2213S. RF general-purpose SPDT switch, bluetooth LOSS = 0.45dB, ISL = 22dB Pi1dB = 17dBmW @f = 2.5 GHz, VC = 0 V/2.7 V TG2216TU UF6 GaAs medium-power SPDT switch Cellular phone, bluetooth, wireless LAN LOSS = 0.7dB, ISL = 23dB Pi1dB = 28dBmW @f = 2.5 GHz, VC = 0 V/2.7 V