T75 MACOM

Document overview

  • PDF pages: 2

Technical content

Page 1

Catalog 1308242 Issued 3-03 (PDF Revised 8-06)

Sensitive, Low Profile, Hi-Current

Relay Designed to Meet

International Standards

PDF page 1 diagram

Features

  • High sensitivity – nominal coil power requirement is as low as 212mW.
  • Low profile, .591 in. (15mm) tall case uses only .465 in2 (3cm2) of area on the printed circuit board, permitting high density circuit design.
  • Power switching capability – contacts rated 10 amps in 1 Form A (SPST-NO) or 1 Form C (SPDT) arrangements.
  • Designed to meet UL, CSA, VDE, SEMKO and SEV requirements.
  • Designed to meet VDE 8mm spacing, 4kV dielectric, coil to contacts.
  • Designed to meet 3 mm creepage between contacts.
  • Conforms to: VDE 0110 – Insulation Group C (250V)

VDE 435 Part 201 – High current applications VDE 0804 – Telecommunications equipment VDE 0631 – Temperature controllers and limiters VDE 0700 – Household appliances VDE 0805/5.90 – Office machines

  • Wash tight (washable).
  • Well suited for a broad range of applications e.g. HVAC, appliances, security and industrial control.

Contact Ratings @ 25°C with relay properly vented.

Remove vent nib after soldering and cleaning.

Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver-cadmium oxide. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations at 8 amps, 240VAC. 50,000 operations at 14 amps NO / 5 amps NC, 120VAC Res. 30,000 operations at 7.2 FLA, 45 LRA, 120VAC. 10,000 operations at 5 FLA, 30 LRA, 240VAC. 30,000 operations at B300 pilot duty (360VA, 240VAC; 470VA, 120VAC). Contact Ratings (See Figure 1): Maximum Switched Voltage: 380VAC. Maximum Switched Current: 14/5 (N.O./N.C.) amps, AC resistive;

8 amps DC (see Fig. 1)

Maximum Switched Power: 200W, DC; 2,000VA, AC. Minimum Required Contact Load: 12V, 100mA. VDE Contact Ratings: 8 amps, 250VAC. UL Contact Ratings: 10 amps, 240VAC; 8 amps 24VDC;

1/3 HP, 120VAC; 1/2 HP, 240VAC.

Figure 1 - DC Switching Load Limit Curve

PDF page 1 diagram

Switching Current (Amps DC)

Dimensions are shown for

Dimensions are in inches over

reference purposes only.

(millimeters) unless otherwise specified.

P&B

T75 series

10 Amp, PC Board

Miniature Relay

File E29244 File No. 3919

Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/ laboratories and review them to ensure the product meets the requirements for a given application.

Initial Dielectric Strength

Between Open Contacts: 1,000V rms. Between Contacts and Coil: 4,000V rms, 8mm.

Coil Data

Voltage: 3 to 60VDC. Maximum Power @ 23°C: 1W. Nominal Power @ 23°C: 230mW, typ. Temperature Rise: 85C° per Watt. Duty Cycle: Continuous.

Coil Data

PDF page 1 diagram

Operate Data @ 23°C

Must Operate Voltage: 70% of nom. voltage or less. Must Release Voltage: 10% of nom. voltage or more. Operate Time (Excluding Bounce): 6 ms, typ., at nom. voltage. Release Time (Excluding Bounce): 2.5 ms, typ., at nom. voltage. Maximum Switching Rate: 20 operations/second. Maximum Continuous Operating Voltage: 225% of nom. voltage.

ENVIRONMENTAL DATA

Temperature Range

Storage: -40°C to +130°C. Operating: -40°C to +85°C.

Mechanical Data

Termination: Printed circuit terminals. Enclosures: Wash tight (washable) case. Weight: 0.39 oz. (11.0g) approximately.

www.tycoelectronics.com

Specifications and availability

Technical support:

subject to change.

Refer to inside back cover.

Page 2

Catalog 1308242 Issued 3-03 (PDF Revised 8-06)

P&B

Ordering Information

PDF page 2 diagram

Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.

T75S5D112-05 T75S5D112-12 T75S5D112-24

Outline Dimensions

PDF page 2 diagram

CONTACT TERMINALS: .023 x .040 (.58 x 1.02) REF. COIL TERMINALS: .024 (.61) DIA. REF.

PC Board Layouts (Bottom Views)

1 Form C

.051 DIA. TYP.

PDF page 2 diagram

(1.3)

Dimensions are shown for

Dimensions are in inches over

reference purposes only.

(millimeters) unless otherwise specified.

Wiring Diagram (Bottom View)

\*

\*ON SINGLE THROW MODELS,

ONLY NECESSARY TERMINALS ARE PRESENT.

1 Form A

.051 DIA. TYP.

PDF page 2 diagram

(1.3)

Specifications and availability

www.tycoelectronics.com

subject to change.

Technical support: Refer to inside back cover.