T53 VISHAY

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

www.vishay.com Vishay Sfernice Revision: 12-Jan-17 1 Document Number: 51014 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 5 mm Through Hole Trimmer Single-Turn Cermet The T53 trimming potentiome ter volumetric efficiency (5 mm x 5 mm x 2.7 mm) wi th high performance and stability. The T53 design is suitable for both manual or automatic operation.

FEATURES

  • Fully sealed
  • 0.25 W at 70 °C
  • Wide ohmic range (10 Ω to 1 MΩ)
  • Low contact resistance variation (2 % or 3 Ω)
  • Small size for optimum packaging density
  • Suitable for both manual or automatic operation
  • For SMD version see TS53Y series
  • Tests according to CECC 41000 or IEC 60393-1
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 DIMENSIONS in millimeters (± 0.25 mm) 3.1 2.6 0.4 0.5 x 0.2 2.54 5.08 2.54 92 26 103 c ab Cruciform screwdriver slot Ø 2.5 width 0.5 Deep: 0.55 Max. deep (center): 0.7

www.vishay.com Vishay Sfernice Revision: 12-Jan-17 2 Document Number: 51014 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 220° ± 15° Resistance range 10 Ω to 1 MΩ Standard series 1 - 2 - 5 Tolerance Standard ± 20 % On request ± 10 % Power rating Linear 0.25 W at +70 °C Circuit diagram Temperature coefficient See Standard Resistance Element Data table Limiting element voltage (linear law) 200 V Contact resistance variation 2 % or 3 Ω End resistance (typical) 0.1 % or 3 Ω Dielectric strength (RMS) 1000 V Insulation resistance 10 6 MΩ Specification In acco rdance with CECC 41100 MECHANICAL SPECIFICATIONS Mechanical travel 270 ° ± 10° Operating torque (max. Ncm) 1.5 End stop torque (max. Ncm) 3.5 Unit weight (max. g) 0.15 Terminals Pure Sn (code e3) ENVIRONMENTAL SPECIFICATIONS Temperature range -55 °C to +155 °C Climatic category 55/125/56 Sealing Enables cleaning - IP67 0 20 40 60 100 120 140 15570 0.05 0.10 0.15 0.20 0.25 AMBIENT TEMPERATURE IN °C POWER IN W a c b cw (2) (3)(1)

www.vishay.com Vishay Sfernice Revision: 12-Jan-17 3 Document Number: 51014 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Nothing stated herein shall be construed as a guarantee of quality or durability. PERFORMANCES TESTS CONDITIONS TYPICAL VALUES AND DRIFTS ΔRT/RT (%) ΔR1-2/R1-2 (%) Load life 1000 h at rated power 90'/30' - ambient temp. +70 °C ± 2 % Contact res. variation: ΔR < 1 % Rn 3 % Moisture resistance MIL-STD 202 method 106 10 cycles of 24 h constituted with damp heat - cold - vibrations ± 2 % Dielectric strength: 1000 VRMS Insulation resistance. > 104 MΩ ± 3 % Long term damp heat Temperature 40 °C - RH 93 % 56 days ± 2 % Dielectric strength: 1000 VRMS Insulation resistance: > 104 MΩ ± 3 % Thermal shock -55 °C to +125 °C - 5 cycles ± 1 % ΔV1-2/V1-3 ≤ ± 2 % Rotational life (electrical and mechanical) 100 cycles - rated power ± (3 % + 5 Ω) Shock MIL-STD 202 method 213/1 100 g - 6 ms 3 successive shocks in 3 directions Vibration MIL-STD 202 method 204/D 20 g - 12 h ± 1 % ΔV1-2/V1-3 ≤ ± 1 % STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW TYPICAL TCR - 55 °C + 125 °C MAX. POWER AT 70 °C MAX. WORKING VOLTAGE MAX. WIPER CURRENT Ω W V mA ppm/°C 10 0.25 1.58 158 ± 100 20 0.25 2.24 112 50 0.25 3.54 71 100 0.25 5.00 50 200 0.25 7.07 35 500 0.25 11.2 22 1K 0.25 15.8 16 2K 0.25 22.4 11 5K 0.25 35.4 7 10K 0.25 50.0 5 20K 0.25 70.7 3.5 50K 0.25 112 2.2 100K 0.25 158 1.6 200K 0.20 200 1.0 500K 0.08 200 0.4 1M 0.04 200 0.2

www.vishay.com Vishay Sfernice Revision: 12-Jan-17 4 Document Number: 51014 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MARKING

  • Vishay trademark
  • Ohmic value (in Ω, kΩ, MΩ) is indicated by a three figure code, the first two are significant figures, the third one is a multiplier. Example: 100 = 10 Ω 101 = 100 Ω 102 = 1000 Ω 503 = 50 000 Ω
  • Manufacturing date is indicated by four digits, the first two for the year, the last for the week number. PACKAGING
  • In box of 250 pieces code B41 (B0250) ORDERING INFORMATION (part number) Model STYLE OHMIC VALUE TOLERANCE PACKAGING SPECIAL NUMBER T53 Y From 10 Ω to 1 MΩ 504 = 500 kΩ 20 % On request: ± 10 % B41 = box 250 pieces (If applicable) Given by Vishay for custom design DESCRIPTION (for information only) T53 Y 500K 20 % B0 e3 MODEL STYLE VALUE TOLERANCE SPECIAL PACKAGING LEAD FINISH RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029

504 M B43T Y5 1

www.vishay.com Vishay Revision: 08-Feb-17 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED