T123500 ETC2

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

76 www.vectorelect.com 800-423-5659Specification subject to change without notice Pad Cutters, Insertion Tools Part No. P116C P138A P138C A .055” .040” .040” B .188” .086” .086” C .250” .125” .125” Shank .250” .125” .125” Holder Type Handle/Shank Handle/Shank Shank Only Part No A13 A13-1 P91A P156 P133A P134 P149A P149 Holder Type Shank with removable rubber handle Shank with removable rubber handle Wooden Handle Wooden Handle Shank with removable rubber handle Wooden Handle Wooden Handle Shank with removable rubber handle Terminal P/N T44 T68 T28 T49 T46 series & K24 - K31 K36 T42-1 T42-1 Use with Vectorbord Pattern G, H .062” holes Pattern P, .042: holes Pattern P, .042: holes Vector Pad Cutters provide an effective method for cre- ating isolated solder pads around holes in copper clad boards. Pilot pin enters hole and rotates, creating a clearance area around the solder pad. Available for boards with.062” or .042” diameter holes. Also available without handles for use with manual or power drills. P138A Wooden Handle type Shows pad removal & pad cutter P116C Pad Cutter Part No. T107/C T107/10 Pkg Qty 100

  • Flat cold-drawn flat copper wire, 0.017” thick (+/-0.003”)
  • 0.080”W with 0.042” diameter holes on 0.100” centers
  • Hot 100% Tin dipped, fully RoHS compliant
  • Compatible with most Vectorbord ® hole patterns T107 Bus Strips HA9
  • Card ejector, corner mounting
  • Supports up to 40 lbs extraction force
  • White nylon, (hardware included) Rotation Type Ejector Handle Part No. HA9/4 HA9/C Pkg Qty 100 PCB Accessories Tools & Handles Tools Hand Insertion Tools for Push-In Terminals P149 Shank with removable rubber handle Dimensional information for HA9 is on Page 44 Shank Type (A13 type) Shank Only P138C A13 Shank with removable rubber handle P149A - Wooden Handle Type Pad Cutters HA14
  • Extraction/insertion handles
  • Mounts on front edge of Plugbordtm with single screw or roll-pin
  • Plastic (FE4) Pull Type Ejector Handle Part No. HA14 HA14/C Package Quantity 100 CATALOG 128_CATALOG 128.qxd 4/25/2014 7:15 AM Page 76

78 www.vectorelect.com 800-423-5659Specification subject to change without notice Slip-On Contacts

  • Reels of slip-on contacts. 5” apart
  • Slips onto .025” square posts
  • 28 gage PVC insulated blue wire
  • Temperature Range: -310 to 221 oF (-190 to 105oC) Part No. T120-1/50 T120-1/250 Package Quantity. Reel of 50 Reel of 250 Contact

Description

T120-1 EyeletsT15.23,T123 C .093” .093” .093” Part No. T15.23/M T123/500 T123/1000 A .062” .055” .055” Qty 1000 500 1000 B .105” .105” .105”

  • 2 versions provide hole size reduction T123 - reduces .055” dia. holes to .042”
  • T123 eyelets are copper with .0003” to .0005” thick tin plating T15.23 - reduces .062” dia. holes to .042”
  • Simulates copper thru hole plating
  • Used to commit power and ground planes ID .042” .042” .042” ID A B C No Contact T123 Eyelet Contact No Contact Board T123 Eyelet Contact PCB Accessories Black Shrinkable Tubing Detail Body End Terminal Only .060 REF 1.52 .04 + .02 1.0 + 0.5 Slit-N-Wrap® Wire Tefzel Insulated Silver Plated Wire for use with No. 02 Bit Part No. W28-6A W28-6B W28-6D W28-6E W28-6F W28-6H W28-6AU W28-6BU W28-6DU W28-6EU W28-6FU W28-6HU AWG Color green red blue white yellow black green red blue white yellow black Spool Dia. 1.5” 1.5” 1.5” 1.5” 1.5” 1.5” Feet/Spool 150 150 150 150 150 150 Spools/Pkg Accessories See specifications on Page 81 Tefzel 28 AWG Wire Insulation Properties Property Test Method Unit Value Thermal Properities Nominal Melting Point ASTM D3159 oC 255-280 (oF) (491-536) Flow Rate ASTM D315 g/10 min 20 Upper Service Temperature UL746 oC 135 Mechanical Properities Tensile Strength, 23oC (73oF) ASTM D3159 MPa, (psi) 40, (6,500) Specific Gravity ASTM D792 - 1.71 Ultimate Elongation, 23oC (73oF) ASTM D3159 % 300 Flexural Modulus, 23oC (73oF) ASTM D790 MPa (psi) 1,200 (170,000) Impact Streength, 23oC (73oF) ASTM D256 J/m (ft-lb/in.) No Break Hardness, Durometer ASTM D2240 Shore D 63 Compressive Strength ASTM D695 MPa, (psi) 38 (5,500) Linear Coefficient of Expansion, ASTM E831 mm/mm/ oC 12.6x 10 -5 0-100oC (32-212oF) in./in./oF (7.0 x 10 -5 ) Electrical Properities Dielectric Constant, 1MHz,23oC (73oF) ASTM D1531 - 2.5-2.6 Dissipation Factor, 1MHz,23oC (73oF) ASTM D1531 - 0.00540 Volume Resistivity ASTM D257 ohm .cm 1 x 10 (1 x 10 Arc Resistance ASTM D49 seconds 122 General Properities Water Absorption, 24 h ASTM D570 % 0.007 Weather and Chemical Resistance - - Excellent Limiting Oxygen Index ASTM D2863 % 30-32 Vector 28AWG Tefzel wire is rated 300V at 150 degrees C CATALOG 128_CATALOG 128.qxd 4/25/2014 7:17 AM Page 78