Datasheet - STB10N60M2, STD10N60M2, STP10N60M2 - N-channel 600 V, 0.55 Ω typ., 7.5 A MDmesh M2 Power MOSFET in a D²PAK, DPAK and TO-220 packages
Document overview
- Manufacturer or author: STMICROELECTRONICS
- PDF pages: 27
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics (curves)
- 3 Test circuits
- 4 Package information
- 4.1 D²PAK (TO-263) type A package information
- 4.2 DPAK (TO-252) type A package information
- 4.3 DPAK (TO-252) type C package information
- 4.4 DPAK (TO-252) type E package information
- 4.5 TO-220 type A package information
- 4.6 D²PAK packing information
- 4.7 DPAK packing information
- 5 Order codes
Features
Order codes VDS @ TJ max. RDS(on) max. ID Package STB10N60M2 650 V 0.60 Ω 7.5 A D²PAK STD10N60M2 DPAK STP10N60M2 TO-220
- Extremely low gate charge
- Excellent output capacitance (Coss) profile
- 100% avalanche tested
- Zener-protected
Applications
- Switching applications
Description
These devices are N-channel Power MOSFETs developed using the MDmesh M2 technology. Thanks to their strip layout and improved vertical structure, these devices exhibit low on-resistance and optimized switching characteristics, rendering them suitable for the most demanding high-efficiency converters. TAB TAB D²PAK DPAK TAB TO-220 D(2, TAB) G(1) S(3) AM01476v1_tab Product status links STB10N60M2 STD10N60M2 STP10N60M2 N-channel 600 V, 0.55 Ω typ., 7.5 A MDmesh M2 Power MOSFET in a D²PAK, DPAK and TO-220 packages STB10N60M2, STD10N60M2, STP10N60M2 Datasheet DS9703 - Rev 5 - July 2025 For further information, contact your local STMicroelectronics sales office.
1 Electrical ratings
Table 1. Absolute maximum ratings
- Pulse limited by safe operating area.
Table 2. Thermal data
- When mounted on a standard 1 inch² area of FR-4 PCB with 2-oz copper.
Table 3. Avalanche characteristics
- Pulse width limited by TJ max.
2 Electrical characteristics
(TC = 25 °C unless otherwise specified). Table 4. Static
- Specified by design, not tested in production.
Table 5. Dynamic
- Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0
Table 6. Switching times Figure 20. Switching time waveform)
Electrical characteristics
Table 7. Source-drain diode
- Pulse width is limited by safe operating area.
- Pulse test: pulse duration = 300 µs, duty cycle 1.5%.
2.1 Electrical characteristics (curves)
Figure 1. Safe operating area for D²PAK and TO-220 Figure 2. Maximum transient thermal impedance for Figure 3. Safe operating area for DPAK Figure 4. Maximum transient thermal impedance for DPAK Figure 5. Output characteristics Figure 6. Transfer characteristics
Figure 7. Gate charge vs gate-source voltage
0 Qg(nC)
Figure 8. Static drain-source on-resistance
2 ID(A)
Figure 9. Capacitance variations Figure 10. Normalized gate threshold voltage vs Figure 11. Normalized on-resistance vs temperature Figure 12. Normalized V(BR)DSS vs temperature
Figure 13. Source-drain diode forward characteristics Figure 14. Output capacitance stored energy
0 V DS (V)
3 Test circuits
Figure 15. Test circuit for resistive load switching times Figure 16. Test circuit for gate charge behavior Figure 17. Test circuit for inductive load switching and Figure 18. Unclamped inductive load test circuit Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform
4 Package information
To meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions, and product status are available at: www.st.com. ECOPACK is an ST trademark.
4.1 D²PAK (TO-263) type A package information
Figure 21. D²PAK (TO-263) type A package outline
Package information
Table 8. D²PAK (TO-263) type A package mechanical data
Figure 22. D²PAK (TO-263) recommended footprint (dimensions are in mm)
4.2 DPAK (TO-252) type A package information
Figure 23. DPAK (TO-252) type A package outline
Table 9. DPAK (TO-252) type A mechanical data
4.3 DPAK (TO-252) type C package information
Figure 24. DPAK (TO-252) type C package outline
Table 10. DPAK (TO-252) type C mechanical data
4.4 DPAK (TO-252) type E package information
Figure 25. DPAK (TO-252) type E package outline
Table 11. DPAK (TO-252) type E mechanical data
Figure 26. DPAK (TO-252) recommended footprint (dimensions are in mm)
4.5 TO-220 type A package information
Figure 27. TO-220 type A package outline
Table 12. TO-220 type A package mechanical data
4.6 D²PAK packing information
Figure 28. D²PAK tape drawing (dimensions are in mm)
4.7 DPAK packing information
Figure 29. DPAK tape outline
Figure 30. DPAK reel outline Table 13. DPAK tape and reel mechanical data
5 Order codes
Table 14. Device summary
Revision history
Table 15. Document revision history 29-May-2013 1 First release. Updated the title and the description in cover page. Updated Table 4: "Avalanche characteristics". Updated Section 4.2: "DPAK (TO-252) type A package information". (TO-251) type C package information". Figure 4. Maximum transient thermal impedance for DPAK. Updated Section 4: Package information.
IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2025 STMicroelectronics – All rights reserved STB10N60M2, STD10N60M2, STP10N60M2 DS9703 - Rev 5 page 27/27