SS52A LEIDITECH
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Ideal for automated placement Low power losses, high efficiency Low forward voltage drop High surge capability High temperature soldering： 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC Mechanical Date Major Ratings and Characteristics Case: JEDEC DO-214AC molded plastic Terminals: Solder plated, solderable per JESD22-B102D Polarity: Laser band denotes cathode end V F T j max. 125 °C I F(AV) 5.0A V RRM
20 V to 200 V
I FSM 150A Maximum Ratings & Thermal Characteristics A = 25 °C unless otherwise noted)
Electrical Characteristics
A = 25 °C unless otherwise noted) Symbo l Note 2: Pulse test:300μs pulse width,1% duty cycle. 20.0 V Reverse current V R DC T j =25℃ I R 0.5 mA T j =100℃ 10.0 Instantaneous forward voltage I F =5.0A (2) V F Operating junction and storage temperature range T T STG –65 to +125 ℃ Voltage rate of change (rated V R ) dv/dt 10000 V/µs Thermal resistance from junction to lead (1) R θJL 35 ℃/W Maximum average forward rectified current I F(AV) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load I FSM 150 A 60 80 100 150 200 VMaximum DC blocking voltage V DC 20 30 40 50 42 56 70 105 140 VMaximum RMS voltage V RMS 14 21 28 35 60 80 100 150 200 VMaximum repetitive peak reverse voltage V RRM 20 30 40 50 Rev : www.leiditech.com 01.06.2016 Items Symbol SS52A SS53A SS54A SS55A SS56A SS58ASS510ASS515ASS520A UNIT Items Test conditions SS52A SS53~54A SS55~56A SS58~510A SS515~520A UNIT
A =25 ℃ unless otherwise noted) Rev : www.leiditech.com 01.06.2016 SS52A~SS520A
Product is intended for use in general electronics applications. Product should be worked less than the ratings; if exceeded, may cause permanent damage.or introduce latent failure mechanisms. The absolute maximum ratings are rated values and must not be exceeded during operation. The following are the general derating methods you design a circuit with a device. I F(AV) We recommend that the worst case current be no greater than 80% . T J : Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at a T J of below 100°C. Rev : www.leiditech.com 01.06.2016 Shanghai Leiditech Electronic Co.,Ltd Email: sale1@leiditech.com Tel : +86- 021 50828806 Fax : +86- 021 50477059 SS52A~SS520A