SS22C LEIDITECH
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Low power losses, high efficiency Low forward voltage drop High surge capability High temperature soldering： 260℃/10 seconds at terminals Mechanical Date Major Ratings and Characteristics Case: JEDEC DO-214AB molded plastic Terminals: Solder plated, solderable per JESD22-B102D Polarity: Laser band denotes cathode end Maximum Ratin g s & Thermal Characteristics I F(AV) 2.0A V RRM
20 V to 200 V
I FSM 50A T j max. 125 °C V F g A = 25 °C unless otherwise noted)
Electrical Characteristics
A = 25 °C unless otherwise noted) Symbol Note 2: Pulse test:300μs pulse width,1% duty cycle. Reverse current V R DC T j =25℃ I R 0.5 mA T j =100℃ 5.0 SS28C ℃/W A V/µs V A 100 10000 Instantaneous forward voltage I F =2.0A (2) V F Thermal resistance from junction to lead (1) R θJL Operating junction and storage temperature range T T STG –65 to +125 Items Test conditions UNITSS22 SS23~24 SS25~26 SS28~210 SS215~220 Voltage rate of change (rated V R ) dv/dt 100 150 200Maximum DC blocking voltage V DC 3020 Maximum average forward rectified current I F(AV) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load I FSM 8040 50 60 21 28 35 42 56 SS210C Maximum repetitive peak reverse voltage V RRM Maximum RMS voltage V RMS SS26C 30 40 50 60 80 V UNIT 150 200 V 70 105 140 DO-214AB (SMC) Schottky rectifier SS22C-SS220C Items Symbol SS22C SS23C SS24C SS25C SS215C SS220C Rev : www.leiditech.com 01.06.2018 1/3
A =25 ℃ unless otherwise noted) Fig.1 Forward Current Derating Curve A verage Forward Current(A 0 30 60 90 120 150 A Fig.2 Maximum Non-Repetitive Paek Forward Surge Current Surge Current(A) Paek Fo rward Surge Curren t 1 10 100 Peak Forward Number of Cycles at 60 Hz 100 Fig.3 Typical Instantaneous Forward Characteristics 100 Forward Current(A) 0.01 0.1 0 0.4 0.8 1.2 1.6 2 Instaneous Instantaneous Forward Voltage(V) Fig.4 Typical Reverse Leakage Characteristics 0.1 L eakage Current(mA) TJ=125℃ TJ=75℃ 0.001 0.01 0 2 04 06 08 0 1 0 0 Instaneous Reverse L TJ=25℃ Percent of Rated Peak Reverse Voltage(%) LeadTemperature(℃) SS25- 26 SS22 SS23- 24 SS28 - 210 SS215- 220 SS22C-SS220C Rev : www.leiditech.com 01.06.2018 2/3
Product is intended for use in general electronics applications. Product should be worked less than the ratings; if exceeded, may cause permanent damage.or introduce latent failure mechanisms. The absolute maximum ratings are rated values and must not be exceeded during operation. The following are the general derating methods you design a circuit with a device. I F(AV) We recommend that the worst case current be no greater than 80% . T J : Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at a T J of below 100°C. 3.20(0.126) 2.90(0.114) 7.11(0.280) 6.60(0.260) 5.59(0.220) 6.22(0.245) 0.203(0.008)MAX 2.62(0.103) 2.06(0.081) 1.52(0.060) 0.76(0.030) 8.13(0.320) 7.75(0.305) 0.305(0.012) 0.152(0.006) SMC SS22C-SS220C Shanghai Leiditech Electronic Co.,Ltd Email: sale1@leiditech.com Tel : +86- 021 50828806 Fax : +86- 021 50477059 Rev : www.leiditech.com 01.06.2018 3/3