SPLUL90AT03 OSRAM
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 15
Technical content
1 Version 0.0 | 2021-09-27 Preliminary datasheet version Produktdatenblatt | Version 1.1 www.osram-os.com
Applications
Metal Can ® TO56 Pulsed Laser Diode in TO-56 Package 905nm, 65 W Peak Power 3D Sensing CCTV Surveillance Electronic Equipment Gesture Recognition Highbay Industrial Industrial Automation (Machine Controls, Light Barriers, Vision Controls) Features: Laser wavelength 905 nm Suited for short laser pulses from 1 to 100 ns Robust TO-can package for high volume applications Not released for automotive applications
Ordering Information
Type Peak output power Ordering Code typ. IF = 20 A; tp = 100 ns; f = 1 kHz Popt SPL UL90AT03 65 W Q65113A1660
2 Version 0.0 | 2021-09-27 Preliminary datasheet version Maximum Ratings TS = 25 °C Parameter Symbol Values Operating temperature Top min. max. -40 °C 85 °C Storage temperature Tstg min. max. -40 °C 100 °C Peak output power 1) Popt max. 75 W Forward current IF max. 20 A Pulse width (FWHM) tP max. 100 ns Duty cycle dc max. 0.1 % Reverse voltage VR max. 3 V Soldering temperature (2 mm from bottom edge of case) TS max. 260 °C
3 Version 0.0 | 2021-09-27 Preliminary datasheet version Characteristics IF = 20 A; tp = 100 ns; D = 0.01 %; TS = 25 °C Parameter Symbol Values Number of emitters n 3 Operating voltage Vop typ. 9.5 V Peak wavelength 2) λpeak min. typ. max. 898 nm 905 nm 912 nm Spectral bandwidth (FWHM) ∆λ typ. 7 nm Peak output power Popt typ. 65 W Beam divergence (FWHM) parallel to pn-junction Θ‖ typ. 10 ° Beam divergence (FWHM) perpendicular to pn-junction Θ┴ typ. 25 ° Threshold current Ith typ. 0.3 A Laser aperture (FWHM) parallel to pn-junction W|| typ. 110 µm Laser aperture (FWHM) perpendicular to pn-junction W┴ typ. 10 µm Thermal resistance junction solder point real 3) RthJS real typ. 35 K / W Relative Spectral Emission 4), 5) Ie,rel = f (λ); IF = 20 A; Popt = 65 W; tp = 100 ns OHW00913 880 λ Ιrel nm 0.25 0.50 0.75 1.00 890 900 910 930
4 Version 0.0 | 2021-09-27 Preliminary datasheet version Far-Field Distribution Perpendicular to pn-Junction 4), 5) Irel = f (Θ⊥); Popt = 65W; tp = 100ns; D = 0.01% OHL00753 0-40 0.25 0.50 0.75 1.00 Deg Irel θ -30 -20 -10 0 10 20 40 Far-Field Distribution Parallel to pn-Junction 4), 5) Irel = f (ΘII); Popt = 65W; tp = 100ns; D = 0.01% Deg-30 θ 0.25 0.50 0.75 Irel 1.00 OHF03755 -20 -10 0 10 30
5 Version 0.0 | 2021-09-27 Preliminary datasheet version Near-Field Distribution Parallel to pn-Junction 4), 5) Irel = f (ΘII); Popt = 65W; tp = 100ns; D = 0.01% Near-Field Distribution Perpendicular to pn-Junction 4), 5) Irel = f (Θ⊥); Popt = 65W; tp = 100ns; D = 0.01%
6 Version 0.0 | 2021-09-27 Preliminary datasheet version Optical Output Power 4), 5) Popt = f (IF) 0 5 10 15 20 Centroid Wavelength 4) λcentroid = f(TS); IF = 20A; tp = 100ns; D = 0.01% Centroid Wavelength 4) λcentroid = f(TS); IF = 20A; tp = 100ns; D = 0.01%
7 Version 0.0 | 2021-09-27 Preliminary datasheet version Peak Output Power 4) Popt = f(TS); IF = 20A; tp = 100ns; D = 0.01%
8 Version 0.0 | 2021-09-27 Preliminary datasheet version Dimensional Drawing 6) Further Information: Approximate Weight: 312.0 mg
9 Version 0.0 | 2021-09-27 Preliminary datasheet version Tray 6) 200 pieces per tray Barcode-Product-Label (BPL)
10 Version 0.0 | 2021-09-27 Preliminary datasheet version Schematic Transportation Box 6) OHA02886 PACKVAR: R077Additional TEXT P-1+Q-1 Multi TOPLED Muster OSRAM Opto Semiconductors (6P) BATCH NO: (X) PROD NO: (9D) D/C: 11(1T) LOT NO: 21002199 123GH1234 0 24 5 (Q)QTY: 2000 0144 (G) GROUP:
260 C RT
240 C R
220 C R
MLBin3:Bin2: Q-1-20 Bin1: P-1-20 LSY T676 2 2a Temp ST R18 DEMY Barcode label Original packing label Box Dimensions of Transportation Box Width Length Height 215 ± 5 mm 265 ± 5 mm 95 ± 5 mm
11 Version 0.0 | 2021-09-27 Preliminary datasheet version Notes Depending on the mode of operation, these devices emit highly concentrated visible and non visible light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1. Subcomponents of this device contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. There- fore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duration. Respective failure limits are described in the IEC60810. For further application related information please visit www.osram-os.com/appnotes Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1 and IEC 62471.
12 Version 0.0 | 2021-09-27 Preliminary datasheet version Disclaimer OSRAM OS assumes no liability whatsoever for any use of this document or its content by recipient includ- ing, but not limited to, for any design in activities based on this preliminary draft version. OSRAM OS may e.g. decide at its sole discretion to stop developing and/or finalising the underlying design at any time. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS website. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Product and functional safety devices/applications or medical devices/applications OSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. OSRAM OS products are not qualified at module and system level for such application. An entire (100%) testing shall be performed after assembly of the OSRAM OS product to the final product. OSRAM OS product are not qualified at module and system level for such application. Customer is fully responsible and accountable for detection capability in case of sudden changes in electro-optical character- istics at component level. In case buyer – or customer supplied by buyer – considers using OSRAM OS components in product safety devices/applications or medical devices/applications, buyer and/or customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and buyer and /or customer will analyze and coordi- nate the customer-specific request between OSRAM OS and buyer and/or customer.
13 Version 0.0 | 2021-09-27 Preliminary datasheet version Glossary 1) Brightness: The brightness values are measured with a tolerance of ±11%. 2) Wavelength: The wavelengths are measured with a tolerance of ±1 nm. 3) Thermal resistance: junction - soldering point, of the device only, mounted on an ideal heatsink (e.g. metal block) 4) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic- es, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could dif- fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 5) Testing temperature: TA = 25°C (unless otherwise specified) 6) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and dimensions are specified in mm.
14 Version 0.0 | 2021-09-27 Preliminary datasheet version
Revision History
0.0 2021-09-27 Initial Version
15 Version 0.0 | 2021-09-27 Preliminary datasheet version Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved.