SPLCG65

SPLCG65 OSRAM

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

 Efficient radiation source for cw operation  Reliable strained InGaP quantum-well structure  Lateral laser aperture 100 µm  Small C-type copper submount for OEM designs

Applications

 Medical applications (cancer treatment, ophthalmology, dermatology)  Pumping of solid state lasers (LiSAF, LiCAF)  Alignment  Laser show, entertainment Safety Advices Depending on the mode of operation, these devices emit highly c oncentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1 “Safety of laser products”.

Wellenlänge Wavelength Bestellnummer Ordering Code SPL CG65 650 nm Q65110A1718 Grenzwerte (kurzzeitiger Betrieb) (Umgebungstemperatur TA = 20 °C) Maximum Ratings (short time operation) (Ambient temperature TA = 20 °C) Parameter Parameter Symbol Symbol Werte Values Einheit Unit min. max. Ausgangsleistung (Dauerstrichbetrieb)1) Output power (continuous wave)1) 1) Zur Leistungsmessung wird die gesamte Lichtleistung in eine Ulbrichtkugel eingekoppelt. Der spezifizierte maximale Wert der Ausgangleistung darf bei keiner Temperatur inklusive Temperaturen unterhalb der Raumtemperatur überschritten werden. Optical power is measured by coupling into an integrati ng sphere. The specified maximum value of output power shall not be exceeded at any temperature including temperatures below room temperature. Pcw – 0.5 W Sperrspannung Reverse voltage VR – 3 V Betriebstemperatur2) Operating temperature2) 2) Die Entstehung von Kondensflüssigkeiten auf dem Bauelement muß ausgeschlossen werden. Das Bauelement muß vor Feuchtigkeit geschützt werden. Bedewing on the device has to be excluded. Protection of the device against humidity must be assured. Top – 10 + 40 °C Lagertemperatur2) Storage temperature2) Tstg – 40 + 85 °C Löttemperatur an der Lötfahne, max. 5 s Soldering temp. at solder flag, max. 5 s Ts1 – 250 °C Löttemperatur am Kupferträger, max. 10 s Soldering temp. at submount, max. 10 s Ts2 – 140 °C

Dioden Kennwerte (Umgebungstemperatur TA = 20 °C) Diode Characteristics (Ambient temperature TA = 20 °C) Parameter Parameter Symbol Symbol Werte Values Einheit Unit min. typ. max. Zentrale Emissionswellenlänge1) Emission wavelength1) λpeak 640 650 660 nm Spektrale Breite (Halbwertsbreite)1) Spectral width (FWHM)1) ∆λ – 2.00 – nm Opt. Ausgangsleistung im Betriebspunkt2) Output power2) Pop – – 0.50 W Differentielle Effizienz1)2) Differential efficiency1)2) η 0.70 0.80 – W/A Schwellstrom Threshold current Ith 0.30 0.45 0.60 A Betriebsstrom1) Operating current1) Iop – 1.10 1.30 A Betriebsspannung1) Operating voltage1) Vop 2.00 2.20 2.40 V Differentieller Serienwiderstand Differential series resistance Rs – 0.20 0.40 Ω Austrittsöffnung Aperture size w × h – 100×1 – µm2 Strahldivergenz (Halbwertsbreite)1) Beam divergence (FWHM)1) deg. Charakteristische Temperatur (Schwelle)3) Characteristic temperature (threshold)3) T0 – 55 – K Temperaturkoeffizient des Betriebsstroms Temperature coefficient of operating current ∂Iop / Iop∂T – 1.50 – %/K Temperaturkoeffizient der Wellenlänge Temperature coefficient of wavelength ∂λ/∂T – 0.14 – nm/K

(pn-Übergang → Wärmesenke) Thermal resistance (junction → heat sink) Rth – 12 – K/W 1) Standardbetriebsbedingungen bezieh en sich auf 0.5W cw optische Ausgangsleistung und auf 20°C Umgebungstemperatur. Standard operating conditions refer to 0.5W cw optical output power and 20°C ambient temperature. 2) Optische Leistungen werden mit einer Ulbrichtkugel gemessen. Optical power measurements refer to an integrating sphere. 3) Modelle zur Bestimmung des thermischen Verhaltens bzgl. des Schwellstroms (Die charakteristische Temperatur gilt für einen Temperaturbereich von 10°C bis 30°C): Model for the thermal behavior of threshold current (The characteristic temperature is valid in the temperature range of 10°C to 30°C): Ith(T2) = Ith(T1) × exp (T2 – T1)/T0 Dioden Kennwerte (Umgebungstemperatur TA = 20 °C) Diode Characteristics (Ambient temperature TA = 20 °C) (cont’d) Parameter Parameter Symbol Symbol Werte Values Einheit Unit min. typ. max.

Berechnete normierte Lebensdauer in Abhängi gkeit von der Umgebungstemperatur für eine Ausgangsleistung von 500 mW Calculated normalized lifetime versus the ambient temperature for an output power of 500 mW Das Diagramm zeigt die berechnete Lebensdauer in Abhängigkeit von Umgebungstemperatur, wobei ein abgeschätzter Wert für die Aktivierungsenerg ie angenommen wird. Das Diagramm stellt eine Abschätzung für die Lebensdauer dar und darf nicht als zugesicherte Eigenschaft verstanden werden. The graph shows the calculated lifetime versus the am bient temperature based on an estimated value for activation energy. The graph des cribes an estimation for lifetime and cannot be considered as assured characteristics. 015 ˚C T OHW02620 A 20 25 30 35 40 45 0.2 0.4 0.6 0.8 1.0Normalized Calculated Lifetime, 0.1 0.3 0.5 0.7 0.9

relΙ -60 deg. Θ -40 -20 0 20 60 0.2 0.4 0.6 0.8 1.0 Optische Kennwerte SPL CG65 (Parameter werden vorn detaillierter aufgeführt). Optical Output Power Popt vs. Forward Current IF (TA = 20 °C) Farfield Distribution Parallel to Junction Irel vs. θ|| Optical Characteristics SPL CG65 (parameters are listed on previous page in detail). Optical Spectrum, Relative Intensity Irel vs. Wavelength λ (TA = 20 °C, Popt = 0.5 W) Farfield Distribution Perpendicular to Junction Irel vs. θ⊥ OHW02544 optP FI W A 0.1 0.2 0.3 0.4 0.5 0.6 0.7 OHW02023 relΙ -15 deg. θ 0.2 0.4 0.6 0.8 1.0 -10 -5 0 5 15 OHW02543 0640 λ 645 650 655 660nm %Ιrel 0.1 0.2 0.3 0.4 0.5

Maßzeichnung Package Outlines Maße in mm (inch) / Dimensions in mm (inch). Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com © All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserv ed. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the cost s of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or system s must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. Cathode Anode GSOY6600 2.9 (0.114) 2.7 (0.106) 7.1 (0.280) 6.7 (0.264) 2.2 (0.087) 2.4 (0.094) 4.6 (0.181) 4.4 (0.173) 6.2 (0.244) 6.6 (0.260) A 0.1 (0.004) A 11.0 (0.433) 9.0 (0.354) 1.3 (0.051) 1.1 (0.043) 2.1 (0.083) 2.3 (0.091)