DATASHEET SEARCH SITE

Document overview

  • PDF pages: 4

Technical content

Page 1

PDF page 1 diagram

NTC Type

SP Series

Ultra-stable Probe

Thermistors

The NTC Type SP60, SP65, SP85, and SP100 Ultra-stable Probe Thermistors have similar construction and dimensions to the Type P60, P65, P85, and P100 Probe Thermistors. Ultra-stable Probe Thermistors receive additional processing to assure their continuous use in one of three temperature classes and are categorized into one of six stability groups.

Applications

The NTC Type SP60, SP65, SP85, and SP100 Ultrastable Probe Thermistors may be used in all temperature measurement and control applications with the added assurance of long term stability and reliability. They are the ideal choice for use as secondary standards in laboratories.

Amphenol

Advanced Sensors

Data

The temperature class represents the maximum permissible continuous operating or storage temperature available. The stability group represents the maximum drift rate, in percent resistance change per year, of the thermistor, when operated or stored at all temperatures up to the maximum rating. Ultrastable Probe Thermistors should not be exposed to temperatures higher than the maximum rating, as this will degrade their stability and void the stability classification. When specified, additional preconditioning can be preformed to stabilize units for a particular application.

Page 2

SP60/65/85/100 Specifications

PDF page 2 diagram

Thermal and Electrical Properties

The following table lists the thermal and electrical properties for all ultra-stable probe thermistors. All definitions and test methods are per MIL-

PRF-23648

Table A

Thermistor Type

SP60

SP65

Body Dimensions

.060 in (1.5 mm)

.065 in (1.6 mm)

Max. Diameter

Standard Lengths

Code “A”

.125 in (3.2 mm)

.125 in (3.2 mm)

Code “B”

.250 in (6.3 mm)

.250 in (6.3 mm)

Code “D”

.500 in (12.7 mm)

.500 in (12.7 mm)

Lead-wires

Nominal Diameter

.008 in (.20 mm)

.008 in (.20 mm)

Minimum Lead Length

.875 in (22 mm)

.875 in (22 mm)

Lead Material

Class “A” 200°F (105°C)

Tinned Dumet

Tinned Dumet

Class “B” 392°F (200°C)

Platinum Alloy

Platinum Alloy

Class “C” 572°F (300°C)

Platinum Alloy

Platinum Alloy

Thermal Time Constant

Still Air at 77°F (25°C)

12 sec

13 sec

Plunge into Water

300 msec

320 msec

Dissipation Constant

Still Air at 77°F (25°C)

.60 mW/°C

.65 mW/°C

Still Water at 77°F (25°C)

3.00 mW/°C

3.30 mW/°C

Power Rating (in air)

100% Maximum Power Rating @ 77°F (25°C) .048 Watts

.052 Watts

See Class

See Class

Derated to 0% @ Maximum Temperature

NTC Type SP60/65/85/100 dimensions

SP85

SP100

.085 in (2.1 mm)

.100 in (2.5 mm)

.125 in (3.2 mm)

.125 in (3.2 mm)

.250 in (6.3 mm)

.250 in (6.3 mm)

.500 in (12.7 mm)

.500 in (12.7 mm)

.012 in (.30 mm)

.012 in (.30 mm)

.875 in (22 mm)

.875 in (22 mm)

Tinned Dumet

Tinned Dumet

Platinum Alloy

Platinum Alloy

Platinum Alloy

Platinum Alloy

16 sec

22 sec

400 msec

600 msec

.85 mW/°C

1.00 mW/°C

4.00 mW/°C

5.00 mW/°C

.068 Watts

.080 Watts

See Class

See Class

Page 3

Stability Classes (By Nominal Resistance at 77°F (25°C)

Ultra-stable probe thermistors availability depends upon nominal resistance at 77°F (25°C). Stability class is indicated by a code letter for temperature class and a code number for stability group.

Example: “A1” = .02% maximum change per year at 221°F (105°C) maximum temperature.

Table B

Material System (All Types 60/65/85/100)

Code Letter R-vs-T Curve 25/125 Ratio Nominal Resistance Range @ 77°F (25°C) Ohms (W) Code Class “A” 221°F (105°C) maximum Class “B” 392°F (200°C) maximum Class “C” 572°F (300°C) maximum
E 0 5.0 30 to 51 – – – – – A6 – – – – – C6
A 1 11.8 51 to 150 – – A3 A4 A5 A6 – – B6 – – C6
A 2 12.5 150 to 360 – – A3 A4 A5 A6 – – B6 – – C6
A 3 14.0 360 to 750 – – A3 A4 A5 A6 – – B6 – – C6
A 4 16.9 750 to 1.5k A1 A2 A3 A4 A5 A6 – B5 B6 – – C6
A 5 19.8 1.5k to 3.6k A1 A2 A3 A4 A5 A6 – B5 B6 – – C6
A 6 22.1 3.6k to 6.2k A1 A2 A3 A4 A5 A6 – B5 B6 – – C6
A 7 22.7 6.2k to 9.1k A1 A2 A3 A4 A5 A6 – B5 B6 – – C6
B 8 29.4 9.1k to 27k A1 A2 A3 A4 A5 A6 – B5 B6 – – C6
B 9 30.8 27k to 43k – A2 A3 A4 A5 A6 – B5 B6 – – C6
B 10 32.3 43k to 75k – A2 A3 A4 A5 A6 – B5 B6 – – C6
B 11 35.7 75k to 160k – A2 A3 A4 A5 A6 – B5 B6 – – C6
B 12 38.1 160k to 360k – A2 A3 A4 A5 A6 – B5 B6 – – C6
B 13 45.0 360k to 750k – A2 A3 A4 A5 A6 – B5 B6 – – C6
B 14 48.1 750k to 1.5M – A2 A3 A4 A5 A6 – B5 B6 – – C6
B 15 56.5 1.5M to 3.0M – – – A4 A5 A6 – – B6 – – C6
D 16 75.6 3.0M to 8.2M – – – A4 A5 A6 – – B6 – – C6
D 17 81.0 8.2M to 20M – – – A4 A5 A6 – – B6 – – C6

“1” = 0.02%/year

“2” = 0.05%/year

“3” = 0.075%/year

“4” = 0.1%/year

“5” = 0.2%/year

“6” = 0.5%/year

Page 4

Ordering Information

The code number to be ordered may be specified as follows: Code

Model Number

SP

60

SP

65

SP

85

SP

100 Code Probe Length A 1/8 in (3.175 mm) B 1/4 in (6.35 mm) D 1/2 in (12.7 mm) Code Material System Code X See table B for codes Code Zero-power resistance @ 77°F (25°C)\*\* 202 See Note 2 Code Tolerance\* F 1 G 2 J 5 K 10 L 15 M 20 N 25 P 30 Q 40 R 50 Non-standard (specify value) S Code Temperature Class Stability 221°F (105°C) maximum A 392°F (200°C) maximum B 572°F (300°C) maximum C Code Group (Resistance Change) 1 .02% per year 2 .05% per year 3 .075% per year 4 .1% per year 5 .2% per year 6 .5% per year

SP ____ - ____ - ____ - ____ - ____ - ____ - ____ Typical model number

\*Special tolerances are available on request. Consult the factory for special resistance tolerances, non-standard resistances and/or nonstandard temperatures.

\*\*The zero-power resistance at 77°F (25°C), expressed in ohms, is identified by a three digit code number. The first two digits represent significant figures, and the last digit specifies the number of zeros to follow. Example: 2k Ohms =“202”. The standard resistance values are from the 24-Value series decade as specified in Military Standard MS90178. 1.0 / 1.1 / 1.2 / 1.3 / 1.5 / 1.6 / 1.8 / 2.0 / 2.2 / 2.4 / 2.7 / 3.0 3.3 / 3.6 / 3.9 / 4.3 / 4.7 / 5.1 / 5.6 / 6.2 / 6.8 / 7.5 / 8.2 / 9.1

Amphenol

Advanced Sensors

www.amphenol-sensors.com

© 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or

trademarks of their respective owners.

AAS-920-248B - 12/2014